“B-60573 3/16″ x 6″ SDS‑PLUS Bit, 2‑Cutter” has been added to your cart.
View cart
Showing 561–600 of 5537 resultsSorted by popularity
$ 256.99Features
Electric brake for maximum productivity
Magnesium components create a lightweight saw (10.6 lbs.) that’s well-balanced and job site tough
Powerful 15.0 AMP motor delivers 5,800 RPM for proven performance and job site durability
Large cutting capacity (2-1/2″ at 90°) and bevel capacity (0°-56°) with positive stops at 22.5°, 45°, and 56°
Large rubberized levers for quick and easy one-handed adjustments
$ 368.99Features
Quiet Series design at only 60 dB for operator and crew comfort; ideal for indoor use
Runs at a lower RPM (1,750) resulting in longer motor and pump life
Complete roll-cage construction provides protection to withstand a variety of job-site, transporting, and storage environments
Oil-free dual-piston pump designed for maintenance-free operation
Lightweight design for increased job site portability
$ 155.99Features
2-mode operation: delivers 750 lumens on High mode or 450 lumens on Low mode
Up to 10 hours of continuous illumination with a 6.0Ah 18V LXT® battery on High mode (battery and charger not included)
Up to 20 hours of continuous illumination with a 6.0Ah 18V LXT® battery on Low mode (battery and charger not included)
L.E.D. lights effectively illuminate work area without the high heat of halogens
Adjusting knobs enable the user to direct the flood light to desired angle
$ 57.37Features
Innovative stackable case design for efficient organization, transporting and protection of tools
Interlocking latches secure lid shut and link multiple cases together
Corresponding channels along lid and base of case for stable, non-shift stacking
Low-profile, rounded carrying handle for user comfort
Recessed side handles for convenient lifting
Reinforced lid provides additional strength and durability
$ 429.99Features
Purple Series
Diameter: 343 mm
Segment height: 11.5 mm
Performance Grade: Gold
Diamond blade and skid plate
For saw models 4000/4200 from Husqvarna
Designed to work specifically with the Soff-Cut system
Soff-Cut allows cutting the contraction joints just one hour after finishing
SALE 4% OFF
$ 282.50Original price was: $282.50. $ 271.20Current price is: $271.20. Features
Integrated L.E.D. battery charge level indicator allows user to monitor battery charge
Provides up to 65% more run time per charge compared to BL1830
Reaches full charge in 45 minutes or less
Compatible only with STAR Protection tools, indicated by the Star symbol™ and/or yellow battery receiver under the tool
Battery delivers consistent power and run time in extreme temperatures, even in winter (-4°F/-20°C)
Equipped with Star Protection Computer Controls™ to protect against overloading, over-discharging and over-heating
Impact-resistant outer case and shock-absorbing inner-liner are engineered to protect the battery
Sixteen contact terminals maintain a constant connection with the tool to help prevent power loss or fluctuation, even during high-vibration applications
Battery resists self-discharge and remains ready for use even after long periods of storage
$ 351.99Features
Powerful 15 AMP motor delivers 3,800 RPM for superior performance and durability
“Tool-less” flange removal for quick and easy blade and wheel changes
Extra-large spark guard captures and deflects debris away from the surrounding area
Large cutting capacity; cuts up to 5″ round and 4″ x 7-5/8″ rectangular
“Tool-less” fence adjustment up to 45º for faster and more accurate angle cuts; adjusts to 3 locations for various material sizes
“Tool-less” vice adjustment for quick and easy clamping of material
Locking pin secures cutting head in down position for easy transport and storage
Stamped steel base provides added rigidity for increased durability
$ 210.99Features
Mechanical 2-speed transmission (0-500 & 0-1,900 RPM) for a wide range of drilling and fastening applications
Makita-built brushless motor delivers 440 in.lbs. of Max Torque
Weighs only 3.6 lbs. with battery for reduced operator fatigue
Built-in dual L.E.D. lights with afterglow illuminate the work area
3-year limited warranty on tool, battery and charger
$ 201.99Features
Makita XPH14Z features a built BL™ Brushless Motor that delivers 1,250 in.lbs. of Max Torque
Compact and ergonomic design at only 7″ long; 14% shorter than previous model
2-speed transmission (0-550 & 0-2,100 RPM) for a wide range of drilling, fastening and hammer drilling applications
0-31,500 BPM for faster hammer drilling in masonry materials
All metal 1/2″ self ratcheting chuck for improved bit gripping strength and durability
Weighs only 6.0 lbs. with battery (battery not included) for reduced operator fatigue
L.E.D. lights illuminate the work area
Rubberized soft grip provides increased operator comfort
Efficient BL™ Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
The electronically-controlled BL™ Brushless Motor efficiently uses energy to match torque and RPM to the changing demands of the application
$ 61.84Features
Tested in accordance with ACI 355.2, AC193 and AC106
Qualified for static, wind and seismic loading conditions
Standard fractional sizes, hole size same as anchor size
No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
Removable — ideal for temporary anchoring or applications where fixtures may need to be moved
6-lobe drive reduces driver-bit cam-outs, resulting in easier installation
Countersunk head allows screw anchor applications incompatible with a hex head
Available in 1/4″ and 3/8″ diameters
$ 95.38Features
Tested in accordance with ACI 355.2, AC193 and AC106
Qualified for static, wind and seismic loading conditions
Thread design undercuts to efficiently transfer the load to the base material
Standard fractional sizes
Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
Reuse of the anchor will not achieve listed loads and is not recommended
$ 13.60Features
For use with angle grinders
Made with high quality diamonds
For smoother and finer cuts in masonry products
Dry or wet cutting for added versatility
Up to 40% faster cutting than turbo blades
Optimum bond matrix provides a faster, longer lasting, and smoother cutting
50% taller (13mm) segments are designed for longer life and faster cutting
$ 5.73Features
Self-centering carbide tip
Centering tip features a more aggressive design for faster hole starting
Central guiding action engineered for more accurate holes
Aggressive head geometry in primary cutter engineered for use in concrete
Engineered for reduced vibration
4″ usable length
For use with Rotary Hammers that accept SDS-PLUS shank bits
$ 4.67Features
Self-centering carbide tip
Centering tip features a more aggressive design for faster hole starting
Central guiding action engineered for more accurate holes
Aggressive head geometry in primary cutter engineered for use in concrete
Engineered for reduced vibration
4″ usable length
For use with Rotary Hammers that accept SDS-PLUS shank bits
$ 4.78Features
Self-centering carbide tip
Centering tip features a more aggressive design for faster hole starting
Central guiding action engineered for more accurate holes
Aggressive head geometry in primary cutter engineered for use in concrete
Engineered for reduced vibration
4″ usable length
For use with Rotary Hammers that accept SDS-PLUS shank bits
$ 3.40Features
Self-centering carbide tip
Centering tip features a more aggressive design for faster hole starting
Central guiding action engineered for more accurate holes
Aggressive head geometry in primary cutter engineered for use in concrete
Engineered for reduced vibration
4″ usable length
For use with Rotary Hammers that accept SDS-PLUS shank bits
$ 3.40Features
Self-centering carbide tip
Centering tip features a more aggressive design for faster hole starting
Central guiding action engineered for more accurate holes
Aggressive head geometry in primary cutter engineered for use in concrete
Engineered for reduced vibration
4″ usable length
For use with Rotary Hammers that accept SDS-PLUS shank bits
$ 5.52Features
Self-centering carbide tip
Centering tip features a more aggressive design for faster hole starting
Central guiding action engineered for more accurate holes
Aggressive head geometry in primary cutter engineered for use in concrete
Engineered for reduced vibration
4″usable length
For use with Rotary Hammers that accept SDS-PLUS shank bits
$ 139.99Features:
Has a .472 inch impregnated diamond segment for longer life, smoother finish and faster cutting
Alternating turbo segment for cut speed, and plain segment for life
Ventilated steel center with cooling holes to reduce heat when cutting
Laser cut dual arbor for consistent fit on high-speed, masonry, and walk-behind saws
$ 1,383.99Features:
Patented twin-air inlets and external rocker wheel keeps saw running clean and reduces debris being trapped in the filter
The four-step easy start eliminates the hassle of a choke by simply turning the switch on, priming the engine, pushing the decompression button, then pulling the cord to start
The electronic carburetor?s electromagnetic valve eliminates the standard choke and half throttle start
The patented iLube option automatically controls mixing of oil and fuel for maximum efficiency
$ 624.99Features:
Excellent blend of performance and price
Laser welded segments for faster penetration
Most aggressive drilling action for general-purpose and masonry applications
16 in. tube length to produce a 13 in. coring depth
$ 7.99Features:
Market leading cutting speed now with an advanced aluminum oxide blend adds more cutting points per unit area
Up to twice the life and aggressive feel with a new active tough bond technology
Three layers of reinforcement for heavy duty tough applications and high power machines
Available in a versatile universal arbor for 1 in and 20 mm arbor machines and in a 20 mm fixed arbor option
SALE 19% OFF
$ 518.17Original price was: $518.17. $ 421.01Current price is: $421.01. Features
Brushless motor delivers up to 565 CFM and 143 MPH
Up to 35 minutes of run time with 40V XGT? 4.0Ah battery
Cruise control lever with variable speed trigger adjusts between 0 – 476 CFM
3-stage telescoping long nozzle
Speed lock for convenient and continuous operation
$ 338.99Features
20V Max
Light Weight
Brushless Cordless Tool
3 Mode LED
$ 22.89Features
505DC Length: 6 3/4 in.
Width: 3/8 in
Handle: DuraCork
Forged from a single piece of the high-grade steel
$ 6.34MASONftS LINE, TWT, 285ft, WHITE
$ 23.99MASONftS LINE, BND, 500ft, ORANGE & BLACK, SIZE 18
B-60573 3/16" x 6" SDS‑PLUS Bit, 2‑Cutter
1 × $3.40 
![[50 Pack] Simpson Strong-Tie THD37400CS Titen HD 3/8 in. x 4 in. Zinc-Plated Countersunk Head Heavy-Duty Screw Anchor](https://heyden.dreamhosters.com/wp-content/uploads/2022/12/b3d40e526ae041ff4ca2b4995a048052d426f671-3-600x600.jpg)
