“505DC Marshalltown 6 3/4 X 3/8 Tuck Pointer – DuraCork Handle” has been added to your cart.
View cart
Showing 561–600 of 5537 resultsSorted by popularity
-
$256.99
Features
- Electric brake for maximum productivity
- Magnesium components create a lightweight saw (10.6 lbs.) that’s well-balanced and job site tough
- Powerful 15.0 AMP motor delivers 5,800 RPM for proven performance and job site durability
- Large cutting capacity (2-1/2″ at 90°) and bevel capacity (0°-56°) with positive stops at 22.5°, 45°, and 56°
- Large rubberized levers for quick and easy one-handed adjustments
-
$368.99
Features
- Quiet Series design at only 60 dB for operator and crew comfort; ideal for indoor use
- Runs at a lower RPM (1,750) resulting in longer motor and pump life
- Complete roll-cage construction provides protection to withstand a variety of job-site, transporting, and storage environments
- Oil-free dual-piston pump designed for maintenance-free operation
- Lightweight design for increased job site portability
-
$155.99
Features
- 2-mode operation: delivers 750 lumens on High mode or 450 lumens on Low mode
- Up to 10 hours of continuous illumination with a 6.0Ah 18V LXT® battery on High mode (battery and charger not included)
- Up to 20 hours of continuous illumination with a 6.0Ah 18V LXT® battery on Low mode (battery and charger not included)
- L.E.D. lights effectively illuminate work area without the high heat of halogens
- Adjusting knobs enable the user to direct the flood light to desired angle
-
$57.37
Features
- Innovative stackable case design for efficient organization, transporting and protection of tools
- Interlocking latches secure lid shut and link multiple cases together
- Corresponding channels along lid and base of case for stable, non-shift stacking
- Low-profile, rounded carrying handle for user comfort
- Recessed side handles for convenient lifting
- Reinforced lid provides additional strength and durability
-
$429.99
Features
- Purple Series
- Diameter: 343 mm
- Segment height: 11.5 mm
- Performance Grade: Gold
- Diamond blade and skid plate
- For saw models 4000/4200 from Husqvarna
- Designed to work specifically with the Soff-Cut system
- Soff-Cut allows cutting the contraction joints just one hour after finishing
-
SALE 4% OFF
$282.50 Original price was: $282.50.$271.20Current price is: $271.20.
Features
- Integrated L.E.D. battery charge level indicator allows user to monitor battery charge
- Provides up to 65% more run time per charge compared to BL1830
- Reaches full charge in 45 minutes or less
- Compatible only with STAR Protection tools, indicated by the Star symbol™ and/or yellow battery receiver under the tool
- Battery delivers consistent power and run time in extreme temperatures, even in winter (-4°F/-20°C)
- Equipped with Star Protection Computer Controls™ to protect against overloading, over-discharging and over-heating
- Impact-resistant outer case and shock-absorbing inner-liner are engineered to protect the battery
- Sixteen contact terminals maintain a constant connection with the tool to help prevent power loss or fluctuation, even during high-vibration applications
- Battery resists self-discharge and remains ready for use even after long periods of storage
-
$351.99
Features
- Powerful 15 AMP motor delivers 3,800 RPM for superior performance and durability
- “Tool-less” flange removal for quick and easy blade and wheel changes
- Extra-large spark guard captures and deflects debris away from the surrounding area
- Large cutting capacity; cuts up to 5″ round and 4″ x 7-5/8″ rectangular
- “Tool-less” fence adjustment up to 45º for faster and more accurate angle cuts; adjusts to 3 locations for various material sizes
- “Tool-less” vice adjustment for quick and easy clamping of material
- Locking pin secures cutting head in down position for easy transport and storage
- Stamped steel base provides added rigidity for increased durability
-
$210.99
Features
- Mechanical 2-speed transmission (0-500 & 0-1,900 RPM) for a wide range of drilling and fastening applications
- Makita-built brushless motor delivers 440 in.lbs. of Max Torque
- Weighs only 3.6 lbs. with battery for reduced operator fatigue
- Built-in dual L.E.D. lights with afterglow illuminate the work area
- 3-year limited warranty on tool, battery and charger
-
$201.99
Features
- Makita XPH14Z features a built BL™ Brushless Motor that delivers 1,250 in.lbs. of Max Torque
- Compact and ergonomic design at only 7″ long; 14% shorter than previous model
- 2-speed transmission (0-550 & 0-2,100 RPM) for a wide range of drilling, fastening and hammer drilling applications
- 0-31,500 BPM for faster hammer drilling in masonry materials
- All metal 1/2″ self ratcheting chuck for improved bit gripping strength and durability
- Weighs only 6.0 lbs. with battery (battery not included) for reduced operator fatigue
- L.E.D. lights illuminate the work area
- Rubberized soft grip provides increased operator comfort
- Efficient BL™ Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
- The electronically-controlled BL™ Brushless Motor efficiently uses energy to match torque and RPM to the changing demands of the application
-
![[50 Pack] Simpson Strong-Tie THD37400CS Titen HD 3/8 in. x 4 in. Zinc-Plated Countersunk Head Heavy-Duty Screw Anchor](https://heyden.dreamhosters.com/wp-content/uploads/2022/12/b3d40e526ae041ff4ca2b4995a048052d426f671-3-600x600.jpg)
$61.84
Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Standard fractional sizes, hole size same as anchor size
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Removable — ideal for temporary anchoring or applications where fixtures may need to be moved
- 6-lobe drive reduces driver-bit cam-outs, resulting in easier installation
- Countersunk head allows screw anchor applications incompatible with a hex head
- Available in 1/4″ and 3/8″ diameters
-
$95.38
Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- Standard fractional sizes
- Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
$13.60
Features
- For use with angle grinders
- Made with high quality diamonds
- For smoother and finer cuts in masonry products
- Dry or wet cutting for added versatility
- Up to 40% faster cutting than turbo blades
- Optimum bond matrix provides a faster, longer lasting, and smoother cutting
- 50% taller (13mm) segments are designed for longer life and faster cutting
-
-
$5.73
Features
- Self-centering carbide tip
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 4″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
$4.67
Features
- Self-centering carbide tip
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 4″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
$4.78
Features
- Self-centering carbide tip
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 4″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
$3.40
Features
- Self-centering carbide tip
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 4″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
$3.40
Features
- Self-centering carbide tip
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 4″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
$5.52
Features
- Self-centering carbide tip
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 4″usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
$139.99
Features:
- Has a .472 inch impregnated diamond segment for longer life, smoother finish and faster cutting
- Alternating turbo segment for cut speed, and plain segment for life
- Ventilated steel center with cooling holes to reduce heat when cutting
- Laser cut dual arbor for consistent fit on high-speed, masonry, and walk-behind saws
-
$1,383.99
Features:
- Patented twin-air inlets and external rocker wheel keeps saw running clean and reduces debris being trapped in the filter
- The four-step easy start eliminates the hassle of a choke by simply turning the switch on, priming the engine, pushing the decompression button, then pulling the cord to start
- The electronic carburetor?s electromagnetic valve eliminates the standard choke and half throttle start
- The patented iLube option automatically controls mixing of oil and fuel for maximum efficiency
-
$624.99
Features:
- Excellent blend of performance and price
- Laser welded segments for faster penetration
- Most aggressive drilling action for general-purpose and masonry applications
- 16 in. tube length to produce a 13 in. coring depth
-
$7.99
Features:
- Market leading cutting speed now with an advanced aluminum oxide blend adds more cutting points per unit area
- Up to twice the life and aggressive feel with a new active tough bond technology
- Three layers of reinforcement for heavy duty tough applications and high power machines
- Available in a versatile universal arbor for 1 in and 20 mm arbor machines and in a 20 mm fixed arbor option
-
SALE 19% OFF
$518.17 Original price was: $518.17.$421.01Current price is: $421.01.
Features
- Brushless motor delivers up to 565 CFM and 143 MPH
- Up to 35 minutes of run time with 40V XGT? 4.0Ah battery
- Cruise control lever with variable speed trigger adjusts between 0 – 476 CFM
- 3-stage telescoping long nozzle
- Speed lock for convenient and continuous operation
-
$338.99
Features
- 20V Max
- Light Weight
- Brushless Cordless Tool
- 3 Mode LED
-
$22.89
Features
- 505DC Length: 6 3/4 in.
- Width: 3/8 in
- Handle: DuraCork
- Forged from a single piece of the high-grade steel
-
-
-
-
-
-
-
-
-
-
-
$6.34
MASONftS LINE, TWT, 285ft, WHITE
-
$23.99
MASONftS LINE, BND, 500ft, ORANGE & BLACK, SIZE 18
RED704433 Marshalltown Adapter Broom Extension Poly
1 × $4.01 
6519 Marshalltown Beaver Tail Counter Duster-13 1/2in Block
2 × $10.12 
Ice Melter Salt
1 × $20.00 
Diablo DS006S Reciprocating 6pc Saw Blade Set
1 × $12.11 
BCAXLE Marshalltown Replacement Axle for BC3697
1 × $31.81 
