“Norton 8 x 0.095 x 7/8-5/8 In. Clipper GMAX iHD Walk-Behind Blade” has been added to your cart.
View cart
Showing 1–40 of 54 resultsSorted by popularity
-
$242.99
Features:
- Norton Clipper features premium iHD technology allows better cutting and consistency, increasing blade life
- Anti-crack ellipsoidal gullets resists cracking of steel core under extreme conditions
- Stroboscopic indicators eliminate overcutting and allow faster cooling of blade
- Segment wear indicators show remaining blade life
-
$110.99
Features:
- Has a .472 inch impregnated diamond segment for longer life, smoother finish and faster cutting
- Alternating turbo segment for cut speed, and plain segment for life
- Ventilated steel center with cooling holes to reduce heat when cutting
- Laser cut dual arbor for consistent fit on high-speed, masonry, and walk-behind saws
-
$8.67
Features
- 21 Gauge Steel Tie Wire
- Bare steel with no coating
- For use with MAX RB397, RB398, RB517 and RB518
-
$55.35
Features
- Quality diamond blade with economical cutting value
- Sintered blade segment
- Diamond depth of .440” (11mm)
- Segment height of .540” (14mm)
-
$139.99
Features:
- Has a .472 inch impregnated diamond segment for longer life, smoother finish and faster cutting
- Alternating turbo segment for cut speed, and plain segment for life
- Ventilated steel center with cooling holes to reduce heat when cutting
- Laser cut dual arbor for consistent fit on high-speed, masonry, and walk-behind saws
-
$1,383.99
Features:
- Patented twin-air inlets and external rocker wheel keeps saw running clean and reduces debris being trapped in the filter
- The four-step easy start eliminates the hassle of a choke by simply turning the switch on, priming the engine, pushing the decompression button, then pulling the cord to start
- The electronic carburetor?s electromagnetic valve eliminates the standard choke and half throttle start
- The patented iLube option automatically controls mixing of oil and fuel for maximum efficiency
-
$624.99
Features:
- Excellent blend of performance and price
- Laser welded segments for faster penetration
- Most aggressive drilling action for general-purpose and masonry applications
- 16 in. tube length to produce a 13 in. coring depth
-
SALE 13% OFF
$14.99 Original price was: $14.99.$12.99Current price is: $12.99.
Features
- 3041020 offers a tapered tri-flute design for faster chip ejection and less binding.
- faster, cleaner holes, less breakout, and extended drilling life.
- Full screw-point tip allows bit to self-feed for ease of drilling.
-
$190.94
Features
- Increased 5 Amp Hour Capacity
- 25.2V Lithium Ion
- Seamless compatibility
- Compatible with JC925A Charger
-
$61.99
Features
- ETIPAC2G10 dispenses with a standard caulking tool
- Seals out moisture, protecting rebar in the concrete from corrosion and flooring from moisture damage
- Meets the requirements of AASHTO M-235 and ASTM C881, Type I, Grade 1, Class C
Freeze-thaw resistant
Injection Guide
-
$44.99
Features
- CPFH09 can be dispensed with a standard caulking tool
- Can also be used on dry cracks if water is introduced
- Expands to fill voids and seal the affected area
- Fast reacting — reaction begins within 1 minute after exposure to moisture
Injection Guide
-
$7.99
Features
- PNOSEGUARD-5 shields your Quik Drive system
- Precise Alignment
- Durable Construction
- Convenient Multi-Pack
-
SALE 11% OFF
$8.99 Original price was: $8.99.$7.99Current price is: $7.99.
Features
- BITPPTX25 T25 driver bit and mandrel designed exclusively for Project Pro
- T25 6-lobe drive provides reliable installation performance
- Specially made for a secure fit with Simpson Strong-Tie fasteners
Strong-Tie Resources:
-
SALE 5% OFF
$325.99 Original price was: $325.99.$310.99Current price is: $310.99.
Features
- Norton provides a smoother cutting surface on the blade, reducing segment wear and enhancing overall performance.
- Reduced angle of contact
- Arrow shaped gullets generate a stronger airflow
- More dedicated cutting power
-
$55.35
Features
- Quality diamond blade with economical cutting value
- Sintered blade segment
- Diamond depth of .440” (11mm)
- Segment height of .540” (14mm)
-
SALE 34% OFF
$37.99 Original price was: $37.99.$24.99Current price is: $24.99.
Features
- Diamond segment SPEED-Edge slot design reduces vibration, providing high cutting speeds that deliver up to 30% faster cuts than standard segmented diamond discs
- 60% taller segments containing superior quality diamonds along with an ultra-durable bond to the disc body for up to 4x longer life
- Hardened disc body absorbs vibration and increases impact resistance to deliver superior quality cuts in hardened materials
-
SALE 23% OFF
$25.99 Original price was: $25.99.$19.99Current price is: $19.99.
Features
- Diamond segment SPEED-Edge slot design reduces vibration, providing high cutting speeds that deliver up to 30% faster cuts than standard segmented diamond discs
- 60% taller segments containing superior quality diamonds along with an ultra-durable bond to the disc body for up to 4x longer life
- Hardened disc body absorbs vibration and increases impact resistance to deliver superior quality cuts in hardened materials
-
SALE 23% OFF
$31.99 Original price was: $31.99.$24.79Current price is: $24.79.
Features
- Diamond segmented SPEED-Edge slot design reduces vibration, providing high cutting speeds that deliver up to 30% faster cuts than standard segmented diamond discs.
- 60%taller segments containing superior quality diamonds along with an ultra-durable bond to the disc body for up to 4x longer life
- Hardened disc body absorbs vibration and increases impact resistance to deliver superior quality cuts in hardned materials
-
SALE 23% OFF
$60.39 Original price was: $60.39.$46.69Current price is: $46.69.
Features
- L- Shaped diamon Segments for a clean, smooth finish with fast grinding action and long wheel life
- Exra-wide slots deliver efficient dust extraction
- Optimized L -shaped diamonds segments and diamond distribution lead to constant diamond exposure for maximum performance in concrete grinding applications
-
-
-
-
$1,861.99
Features:
- The 1-1/4 ? 7 spindle with 5/8-11 threaded adapter allows additional bit types to be used
- Compact carrying case provides room for side handle, manual, and extra tools and is made of light-weight, high-impact plastic to protect drill during transportation
- Optional stand provides additional drilling flexibility with its sturdy column and carriage for smooth drilling
- Smart Electronics motor protection and safety clutch avoids overheating for safe operation
-
$3,833.99
Features:
- Vacuum pump made with superior stabilization
- Wheel attachment allows for easy transporting around job site
- Extending ceiling jack for indoor drilling
- Carriage and pinion assembly provides a simple trouble-free system to extend service life
-
$870.99
Features:
- Strong belt-driven 1HP motor provides powerful and precise cutting
- Light-weight conveyor provides a smooth slide creating straight cuts and has a locking mechanism for easier transportation
- High intake and output to keep fresh water in pan with a durable filter to keep debris out
- Aluminum cutting table is equipped with anti-skid top for keeping material in place while cutting
-
SALE 4% OFF
$1,219.99 Original price was: $1,219.99.$1,171.19Current price is: $1,171.19.
Features:
- Patented twin-air inlets and external rocker wheel keeps saw running clean and reduces debris being trapped in the filter
- The four-step easy start eliminates the hassle of a choke by simply turning the switch on, priming the engine, pushing the decompression button, then pulling the cord to start
- The electronic carburetor?s electromagnetic valve eliminates the standard choke and half throttle start
- CP514-350 patented iLube option automatically controls mixing of oil and fuel for maximum efficiency
-
$20.99
Features:
- Consistent performance – lowest initial price point
- Provides the smoothest of cuts
- Use on porcelain and tile and marble and other hard materials requiring a high-quality cut
- Good life and good cut rate and best finish
-
$51.99
Features:
- Consistent performance – lowest initial price point
- Most aggressive cutting action for general-purpose and masonry applications
- Use when cutting speed and productivity are more important than finish
- Best life and best cut rate and good finish
-
$55.99
Features:
- Consistent performance – lowest initial price point
- Most aggressive cutting action for general-purpose and masonry applications
- Use when cutting speed and productivity are more important than finish
- Best life and best cut rate and good finish
-
$108.99
Features:
- Premium Segment Specifications provide a special bond for the smoothest cut and finish and is ideal for porcelain
- The Norton Clipper Slicer’s razor-thin design allows for precision cuts every time reducing the loss of materials
- The thin high tensile strength steel core is deisgned for better accuracy and less wobbling
- The bond and diamond specification enhances the cutting speed and improves blade life
-
$251.99
Features:
- Anchor slot gullets prevent cracking while keeping the blade cool
- Varying depth anchor slot reduces vibration for smoother cut and harmonically balance the core
- Exclusive universal arbor will fit most saws including Soff-Cut with triple knockouts
- Unique segment specifications designed for specific aggregate hardness and type
-
$176.99
Features:
- Anchor slot gullets prevent cracking while keeping the blade cool
- Varying depth anchor slot reduces vibration for smoother cut and harmonically balance the core
- Exclusive universal arbor will fit most saws including Soff-Cut with triple knockouts
- Unique segment specifications designed for specific aggregate hardness and type
-
$35.99
Features:
- Consistent performance – low initial price point
- Provides the smoothest of cuts
- Use on porcelain and tile and marble and other hard materials requiring a high-quality cut
- Good life and good cut rate and best finish
-
$63.99
Features:
- Single Row cup grinders are ideal for fast stock removal
- Strategically placed hole designs help ventilate dust from the surface extending the life of the cups
- Single Row cup wheels are an excellent and economical way to grind a variety of hard materials such as concrete and stone and masonry
- Consistent Performance- Low Initial Price Point
-
$37.99
Features:
- Single Row cup grinders are ideal for fast stock removal
- Strategically placed hole designs help ventilate dust from the surface extending the life of the cups
- Single Row cup wheels are an excellent and economical way to grind a variety of hard materials such as concrete and stone and masonry
- Consistent Performance- Low Initial Price Point
-
$84.99
Features:
- Infiltrated High-Density (iHD) segments made with Patented technology for longer life and faster grinding
- Unique segment design and large grinding surface provides better comfort with minimal vibration
- A thick body for increased safety that allows more pressure when needed but resists flexing that causes breakage
- Larger ventilation holes than the conventional single and double row cup wheels for better cooling
-
$52.99
Features:
- Infiltrated High-Density (iHD) segments made with Patented technology for longer life and faster grinding
- Unique segment design and large grinding surface provides better comfort with minimal vibration
- A thick body for increased safety that allows more pressure when needed but resists flexing that causes breakage
- Larger ventilation holes than the conventional single and double row cup wheels for better cooling
-
$500.99
Features:
- Excellent blend of performance and price
- Laser welded segments for faster penetration
- Most aggressive drilling action for general-purpose and masonry applications
- 16 in. tube length to produce a 13 in. coring depth
-
$178.99
Features:
- Excellent blend of performance and price
- Laser welded segments for faster penetration
- Most aggressive drilling action for general-purpose and masonry applications
- 16 in. tube length to produce a 13 in. coring depth
-
$148.99
Features:
- Excellent blend of performance and price
- Laser welded segments for faster penetration
- Most aggressive drilling action for general-purpose and masonry applications
- 16 in. tube length to produce a 13 in. coring depth
Diablo DS1212BWS 12 in. 6/12 TPI Demo Demon Nail-Embedded Wood Cutting Reciprocating Saw Blade 
5007F 7‑1/4" Circular Saw 
