“[Pack of 100] Dewalt 02820-PWR 1/4″ X 1-1/2″ Zamac Nailin Hammer Drive Anchor, Mushroom Head” has been added to your cart.
View cart
Showing 1–40 of 84 resultsSorted by popularity
$ 20.38
Features
50% taller (13mm) segments are designed for longer life and faster cutting
Up to 4x longer life than competitive blades
Optimum bond matrix provides a faster, longer lasting, and smoother cutting
Up to 30% smoother cutting than segmented blades
Carefully tensioned for less vibration and a superior user experience
Strict quality control measures ensure superior performance
Dry or wet cutting for added versatility
$ 11.60
Features
Optimum bond matrix provides a faster, longer lasting, and smoother cutting
Dry or wet cutting for added versatility
Carefully tensioned for less vibration and a superior user experience
Made with high quality diamonds
50% taller (13mm) segments are designed for longer life and faster cutting
Strict quality control measures ensure superior performance
For smoother and finer cuts in masonry products
$ 14.20
Features
50% taller (13mm) segments are designed for longer life and faster cutting
Up to 4x longer life than competitive blades
Optimum bond matrix provides a faster, longer lasting, and smoother cutting
Up to 30% smoother cutting than segmented blades
Carefully tensioned for less vibration and a superior user experience
Made with high quality diamonds
Dry or wet cutting for added versatility
$ 45.79
Features
Taller 13mm segments are designed for longer life and faster cutting
Up to 4x longer life than competitive blades
For cutting concrete, block, brick, pavers, and roof tiles
Optimum bond matrix provides a faster, longer lasting, and smoother cutting diamond blade
Made with high quality diamonds
For smoother and finer cuts in masonry products
For use with angle grinders or masonry saws
$ 22.00
Features
Self-centering carbide tip
Centering tip features a more aggressive design for faster hole starting
Central guiding action engineered for more accurate holes
Aggressive head geometry in primary cutter engineered for use in concrete
Engineered for reduced vibration
8″ usable length
For use with Rotary Hammers that accept SDS-PLUS shank bits
$ 1,327.06
Features
19.4 Joules of impact energy for fast drilling and chipping, even in the hardest concrete.
Anti-Rotation E-CLUTCH System shuts down the tool in bind up situations.
Constant speed electronics allows the tool to maintain speed under load
The SHOCKS Active Vibration Control System reduces vibration felt by the user at the handles, compared to rotary hammers without this feature.
The heavy weight design makes it ideally suited for horizontal and downward drilling for #9 – #14 rebar dowel applications and dry coring up to 6 in.
$ 1,008.99
Features
6.1 Joules of impact energy for fast drilling and chipping, even in the hardest concrete.
Anti-Rotation E-CLUTCH ® System shuts down the tool in bind up situations.
Constant speed electronics allows the tool to maintain speed under load.
System reduces vibration felt by the user at the handles, compared to rotary hammers without thsis feature.
The light weight design makes it ideally suited for horizontal drilling for #3 – #6 rebar dowel applications and dry coring up to 3 in.
$ 1,516.99
Features
Dewalt DCH775X2 offers rapid drilling and chipping in hard concrete with 19.4 J of impact energy
Maintain speed under heavy loads with constant speed electronics
Efficient performance and runtime with brushless motor and German-engineered apparatus
Pro-grade versatility: Tackle horizontal and downward drilling for #9 – #14 rebar dowel applications, dry coring up to 6 in., chipping in any lower wall and floor, bushing, and ground rod driving
Reduced vibration for comfortable grip Active Vibration Control
$ 13.60
Features
For use with angle grinders
Made with high quality diamonds
For smoother and finer cuts in masonry products
Dry or wet cutting for added versatility
Up to 40% faster cutting than turbo blades
Optimum bond matrix provides a faster, longer lasting, and smoother cutting
50% taller (13mm) segments are designed for longer life and faster cutting
$ 5.73
Features
Self-centering carbide tip
Centering tip features a more aggressive design for faster hole starting
Central guiding action engineered for more accurate holes
Aggressive head geometry in primary cutter engineered for use in concrete
Engineered for reduced vibration
4″ usable length
For use with Rotary Hammers that accept SDS-PLUS shank bits
$ 4.67
Features
Self-centering carbide tip
Centering tip features a more aggressive design for faster hole starting
Central guiding action engineered for more accurate holes
Aggressive head geometry in primary cutter engineered for use in concrete
Engineered for reduced vibration
4″ usable length
For use with Rotary Hammers that accept SDS-PLUS shank bits
$ 4.78
Features
Self-centering carbide tip
Centering tip features a more aggressive design for faster hole starting
Central guiding action engineered for more accurate holes
Aggressive head geometry in primary cutter engineered for use in concrete
Engineered for reduced vibration
4″ usable length
For use with Rotary Hammers that accept SDS-PLUS shank bits
$ 3.40
Features
Self-centering carbide tip
Centering tip features a more aggressive design for faster hole starting
Central guiding action engineered for more accurate holes
Aggressive head geometry in primary cutter engineered for use in concrete
Engineered for reduced vibration
4″ usable length
For use with Rotary Hammers that accept SDS-PLUS shank bits
$ 3.40
Features
Self-centering carbide tip
Centering tip features a more aggressive design for faster hole starting
Central guiding action engineered for more accurate holes
Aggressive head geometry in primary cutter engineered for use in concrete
Engineered for reduced vibration
4″ usable length
For use with Rotary Hammers that accept SDS-PLUS shank bits
$ 5.52
Features
Self-centering carbide tip
Centering tip features a more aggressive design for faster hole starting
Central guiding action engineered for more accurate holes
Aggressive head geometry in primary cutter engineered for use in concrete
Engineered for reduced vibration
4″usable length
For use with Rotary Hammers that accept SDS-PLUS shank bits
SALE 5% OFF
$ 325.99 Original price was: $325.99. $ 310.99Current price is: $310.99.
Features
Norton provides a smoother cutting surface on the blade, reducing segment wear and enhancing overall performance.
Reduced angle of contact
Arrow shaped gullets generate a stronger airflow
More dedicated cutting power
$ 47.99
Features
Apply a fine finish
Hardwood block
2148-N is made from quality material
$ 31.99
Features
2136-N applies a fine finish
Hardwood Block
Alternative to Horsehair
$ 76.99
Features
DW5824 features high impact tips to maximizes carbide surface contact for longer bit life.
Open head design channels dust into flutes for quicker drilling.
Longer helix four flute design expedites mill removal for quicker drilling.
For use with all brands of SDS max rotary hammers.
$ 2,627.99
Features
DCPS320AG2 features an Advanced Module – Maintain constant VPM until the battery is fully depleted
Activated remote control for water management and wireless communication to other DEWALT products
Connect provided strap for seamless transport with integrated carry harness connection points
Helps withstand tough jobsite conditions with a durable roll cage
Simply push in the desired shaft and twist the collar to remove
$ 3,427.99
Features
Work comfortably with controls that can be mounted on either side of the harness at various heights
Take advantage of a lightweight 25 lbs. design with the DEWALT POWERSHIFT Battery (DCBPS0554 battery sold separately)
DCPS310AG2 is designed To Withstand Jobsite Conditions – Take on tough jobsites with a durable roll cage
Change Connection – Simply push in the desired shaft and twist the collar to remove
Innovative cordless equipment for Site Prep, Placement, Coring, and more
$ 3,971.29
Features
One-piece design
Quick and easy installation
4QLHD is made from durable noncorrosive plastic
Snaps over the rebar
$ 62.80
Features
Pins for Concrete and Concrete Masonry (CMU)
Gas Fasteners
Code compliant with the 2018 IBC/IRC, 2015 IBC/IRC, 2012 IBC/IRC, and 2009 IBC/IRC
Tested in accordance with ASTM E1190 and ICC-ES AC70 for use in concrete, CMU block and steel
$ 18.58
Features
CFC free propellant
Class B2 Flame retardant
Physiologically harmless when fully cured
Contains no urea formaldehyde or PCB’s
Does not rot or deteriorate with age
$ 12.99
Features
General purpose anchoring
02820-PWR installs in a variety of base materials
Roof Flashing
Mechanical Attachments
$ 10.99
Features
General purpose anchoring
02814-PWR installs in a variety of base materials
Roof Flashing
Mechanical Attachments
$ 25.59
Features
05523-PWR offers a pre-expanded anchor design allowing for easy installation
Mushroom and flat head Spike anchors are tamper-proof
Forming Spike, which is removable, can be used for temporary installations
Pipe and tie-wire Spike is a simple to install alternative to direct fastening (e.g. powder actuated)
$ 3.16
Features
One Size Fits Most
Provides protection with concrete, self-leveling, mastic, grout and other materials.
Resistant to most chemicals, paints and sealers
Easy-to-spot on jobsite.
$ 25.50
Features
Self-centering carbide tip
Centering tip features a more aggressive design for faster hole starting
Central guiding action engineered for more accurate holes
Aggressive head geometry in primary cutter engineered for use in concrete
Engineered for reduced vibration
$ 1,014.99
Features
Makita-built brushless motor along with 40V max XGT® battery combine to deliver the power and performance required for heavy-load applications
Constant speed control automatically applies additional power under load for optimum performance
Overload protection is designed to protect the motor from burnout in abnormally high torque situations
XGT® technology delivers up to 135 of 3/8″ holes using a fully charged 40V XGT® 4.0Ah battery*
Active Feedback-Sensing Technology (AFT®) electronically turns off the motor if rotation of bit is suddenly forced to stop
$ 1,092.99
Features
Makita-built brushless motor along with 40V max XGT® battery combine to deliver the power performance required for heavy-load application
Constant speed control automatically applies additional power under load for optimum performance
Overload protection is designed to protect the motor from burnout in abnormally high torque situations
XGT® technology delivers up to 135 of 3/8″ holes per charge using full charged 40V XGT® 4.0Ah battery*
Quick change chuck allows for interchangeability from SDS-PLUS to 1/2″ keyless chuck for utilization of straight shank bits
$ 1,030.99
Features
FAST DRILLING IN CONCRETE with 4.5 J of impact energy
System reduces vibration felt by the user at the handles comparted to rotary hammers without this feature
System shuts down the tool in bind up situations
when paired with DWH200D shroud and DCV585 dust extractor
to quickly switch between drilling, hammer drilling, and chipping applications
$ 1,395.99
Features
RAPID DRILLING AND CHIPPING in hard concrete with 13.3 J of impact energy
MAINTAIN SPEED UNDER HEAVY LOADS with constant speed electronics
EFFICIENT PERFORMANCE AND RUNTIME with brushless motor and German-engineered mechanism
PRO-GRADE VERSATILITY: Tackle horizontal and downward drilling for #6 – #9 rebar dowel applications, dry coring up to 5 in., chipping in any lower-to-mid wall, bushing, and ground rod driving
REDUCED VIBRATION FOR COMFORTABLE GRIP with SHOCKS™ Active Vibration Control®
$ 927.99
Features
Makita-built motor delivers up to 15,500 VPM to help increase strength of concrete
Two-power mode selection (normal/power) allows the use of the tool for a wide range of job site applications: Concrete compaction of floors, pillars, and mat foundations
Up to 45 minutes of run time in power mode and 60 minutes of run time in normal mode
Compact and ergonomic design at only 77″ long
Weighs only 10.6 lbs. with battery for reduced operator fatigue
$ 681.99
Features
Makita-built motor delivers up to 15,500 VPM to help increase strength of concrete
Two-power mode selection (normal/power) allows the use of the tool for a wide range of job site applications: Concrete compaction of floors, pillars, and mat foundations
Up to 45 minutes of run time in power mode and 60 minutes of run time in normal mode (battery not included)
Compact and ergonomic design at only 77″ long
Weighs only 10.6 lbs. with battery for reduced operator fatigue (battery not included)
$ 802.99
Features
Makita-built motor delivers up to 15,500 VPM to help increase strength of concrete
Two-power mode selection (normal/power) allows the use of the tool for a wide range of job site applications: Concrete compaction of floors, pillars, and mat foundations
Up to 45 minutes of run time in power mode and 60 minutes of run time in normal mode (battery not included)
Compact and ergonomic design at only 99″ long
Weighs only 17.2 lbs. with battery for reduced operator fatigue (battery not included)
$ 6.99
Features
Marking paint covers more linear feet per can than other brands
Use on grass, gravel, dirt, concrete, asphalt and more
Precision tip results in virtually no overspray
Resists early fading and chalking; lasts up to 30 days