“E-02515 9in Diamond Blade Segmented General Purpose” has been added to your cart.
View cart
Showing 1–40 of 84 resultsSorted by popularity
-


$20.38
Features
- 50% taller (13mm) segments are designed for longer life and faster cutting
- Up to 4x longer life than competitive blades
- Optimum bond matrix provides a faster, longer lasting, and smoother cutting
- Up to 30% smoother cutting than segmented blades
- Carefully tensioned for less vibration and a superior user experience
- Strict quality control measures ensure superior performance
- Dry or wet cutting for added versatility
-


$11.60
Features
- Optimum bond matrix provides a faster, longer lasting, and smoother cutting
- Dry or wet cutting for added versatility
- Carefully tensioned for less vibration and a superior user experience
- Made with high quality diamonds
- 50% taller (13mm) segments are designed for longer life and faster cutting
- Strict quality control measures ensure superior performance
- For smoother and finer cuts in masonry products
-


$14.20
Features
- 50% taller (13mm) segments are designed for longer life and faster cutting
- Up to 4x longer life than competitive blades
- Optimum bond matrix provides a faster, longer lasting, and smoother cutting
- Up to 30% smoother cutting than segmented blades
- Carefully tensioned for less vibration and a superior user experience
- Made with high quality diamonds
- Dry or wet cutting for added versatility
-


$45.79
Features
- Taller 13mm segments are designed for longer life and faster cutting
- Up to 4x longer life than competitive blades
- For cutting concrete, block, brick, pavers, and roof tiles
- Optimum bond matrix provides a faster, longer lasting, and smoother cutting diamond blade
- Made with high quality diamonds
- For smoother and finer cuts in masonry products
- For use with angle grinders or masonry saws
-

$22.00
Features
- Self-centering carbide tip
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 8″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-


$1,327.06
Features
- 19.4 Joules of impact energy for fast drilling and chipping, even in the hardest concrete.
- Anti-Rotation E-CLUTCH System shuts down the tool in bind up situations.
- Constant speed electronics allows the tool to maintain speed under load
- The SHOCKS Active Vibration Control System reduces vibration felt by the user at the handles, compared to rotary hammers without this feature.
- The heavy weight design makes it ideally suited for horizontal and downward drilling for #9 – #14 rebar dowel applications and dry coring up to 6 in.
-


$1,008.99
Features
- 6.1 Joules of impact energy for fast drilling and chipping, even in the hardest concrete.
- Anti-Rotation E-CLUTCH ® System shuts down the tool in bind up situations.
- Constant speed electronics allows the tool to maintain speed under load.
- System reduces vibration felt by the user at the handles, compared to rotary hammers without thsis feature.
- The light weight design makes it ideally suited for horizontal drilling for #3 – #6 rebar dowel applications and dry coring up to 3 in.
-


$1,516.99
Features
- Dewalt DCH775X2 offers rapid drilling and chipping in hard concrete with 19.4 J of impact energy
- Maintain speed under heavy loads with constant speed electronics
- Efficient performance and runtime with brushless motor and German-engineered apparatus
- Pro-grade versatility: Tackle horizontal and downward drilling for #9 – #14 rebar dowel applications, dry coring up to 6 in., chipping in any lower wall and floor, bushing, and ground rod driving
- Reduced vibration for comfortable grip Active Vibration Control
-


$13.60
Features
- For use with angle grinders
- Made with high quality diamonds
- For smoother and finer cuts in masonry products
- Dry or wet cutting for added versatility
- Up to 40% faster cutting than turbo blades
- Optimum bond matrix provides a faster, longer lasting, and smoother cutting
- 50% taller (13mm) segments are designed for longer life and faster cutting
-

$5.73
Features
- Self-centering carbide tip
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 4″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-

$4.67
Features
- Self-centering carbide tip
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 4″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-

$4.78
Features
- Self-centering carbide tip
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 4″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-

$3.40
Features
- Self-centering carbide tip
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 4″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-

$3.40
Features
- Self-centering carbide tip
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 4″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-

$5.52
Features
- Self-centering carbide tip
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 4″usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
SALEÂ 5% OFF

$325.99 Original price was: $325.99.$310.99Current price is: $310.99.
Features
- Norton provides a smoother cutting surface on the blade, reducing segment wear and enhancing overall performance.
- Reduced angle of contact
- Arrow shaped gullets generate a stronger airflow
- More dedicated cutting power
-

$47.99
Features
- Apply a fine finish
- Hardwood block
- 2148-N is made from quality material
-

$31.99
Features
- 2136-N applies a fine finish
- Hardwood Block
- Alternative to Horsehair
-


$76.99
Features
- DW5824 features high impact tips to maximizes carbide surface contact for longer bit life.
- Open head design channels dust into flutes for quicker drilling.
- Longer helix four flute design expedites mill removal for quicker drilling.
- For use with all brands of SDS max rotary hammers.
-


$2,627.99
Features
- DCPS320AG2 features an Advanced Module – Maintain constant VPM until the battery is fully depleted
- Activated remote control for water management and wireless communication to other DEWALT products
- Connect provided strap for seamless transport with integrated carry harness connection points
- Helps withstand tough jobsite conditions with a durable roll cage
- Simply push in the desired shaft and twist the collar to remove
-


$3,427.99
Features
- Work comfortably with controls that can be mounted on either side of the harness at various heights
- Take advantage of a lightweight 25 lbs. design with the DEWALT POWERSHIFT Battery (DCBPS0554 battery sold separately)
- DCPS310AG2 is designed To Withstand Jobsite Conditions – Take on tough jobsites with a durable roll cage
- Change Connection – Simply push in the desired shaft and twist the collar to remove
- Innovative cordless equipment for Site Prep, Placement, Coring, and more
-


$3,971.29
Features
- One-piece design
- Quick and easy installation
- 4QLHD is made from durable noncorrosive plastic
- Snaps over the rebar
-

$62.80
Features
- Pins for Concrete and Concrete Masonry (CMU)
- Gas Fasteners
- Code compliant with the 2018 IBC/IRC, 2015 IBC/IRC, 2012 IBC/IRC, and 2009 IBC/IRC
- Tested in accordance with ASTM E1190 and ICC-ES AC70 for use in concrete, CMU block and steel
-

$18.58
Features
- CFC free propellant
- Class B2 Flame retardant
- Physiologically harmless when fully cured
- Contains no urea formaldehyde or PCB’s
- Does not rot or deteriorate with age
-

$12.99
Features
- General purpose anchoring
- 02820-PWR installs in a variety of base materials
- Roof Flashing
- Mechanical Attachments
-

$10.99
Features
- General purpose anchoring
- 02814-PWR installs in a variety of base materials
- Roof Flashing
- Mechanical Attachments
-

$25.59
Features
- 05523-PWR offers a pre-expanded anchor design allowing for easy installation
- Mushroom and flat head Spike anchors are tamper-proof
- Forming Spike, which is removable, can be used for temporary installations
- Pipe and tie-wire Spike is a simple to install alternative to direct fastening (e.g. powder actuated)
-

$3.16
Features
- One Size Fits Most
- Provides protection with concrete, self-leveling, mastic, grout and other materials.
- Resistant to most chemicals, paints and sealers
- Easy-to-spot on jobsite.
-


$25.50
Features
- Self-centering carbide tip
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
-


$1,014.99
Features
- Makita-built brushless motor along with 40V max XGT® battery combine to deliver the power and performance required for heavy-load applications
- Constant speed control automatically applies additional power under load for optimum performance
- Overload protection is designed to protect the motor from burnout in abnormally high torque situations
- XGT® technology delivers up to 135 of 3/8″ holes using a fully charged 40V XGT® 4.0Ah battery*
- Active Feedback-Sensing Technology (AFT®) electronically turns off the motor if rotation of bit is suddenly forced to stop
-


$1,092.99
Features
- Makita-built brushless motor along with 40V max XGT® battery combine to deliver the power performance required for heavy-load application
- Constant speed control automatically applies additional power under load for optimum performance
- Overload protection is designed to protect the motor from burnout in abnormally high torque situations
- XGT® technology delivers up to 135 of 3/8″ holes per charge using full charged 40V XGT® 4.0Ah battery*
- Quick change chuck allows for interchangeability from SDS-PLUS to 1/2″ keyless chuck for utilization of straight shank bits
-


$1,030.99
Features
- FAST DRILLING IN CONCRETE with 4.5 J of impact energy
- System reduces vibration felt by the user at the handles comparted to rotary hammers without this feature
- System shuts down the tool in bind up situations
- when paired with DWH200D shroud and DCV585 dust extractor
- to quickly switch between drilling, hammer drilling, and chipping applications
-


$1,395.99
Features
- RAPID DRILLING AND CHIPPING in hard concrete with 13.3 J of impact energy
- MAINTAIN SPEED UNDER HEAVY LOADS with constant speed electronics
- EFFICIENT PERFORMANCE AND RUNTIME with brushless motor and German-engineered mechanism
- PRO-GRADE VERSATILITY: Tackle horizontal and downward drilling for #6 – #9 rebar dowel applications, dry coring up to 5 in., chipping in any lower-to-mid wall, bushing, and ground rod driving
- REDUCED VIBRATION FOR COMFORTABLE GRIP with SHOCKS™ Active Vibration Control®
-


$927.99
Features
- Makita-built motor delivers up to 15,500 VPM to help increase strength of concrete
- Two-power mode selection (normal/power) allows the use of the tool for a wide range of job site applications: Concrete compaction of floors, pillars, and mat foundations
- Up to 45 minutes of run time in power mode and 60 minutes of run time in normal mode
- Compact and ergonomic design at only 77″ long
- Weighs only 10.6 lbs. with battery for reduced operator fatigue
-


$681.99
Features
- Makita-built motor delivers up to 15,500 VPM to help increase strength of concrete
- Two-power mode selection (normal/power) allows the use of the tool for a wide range of job site applications: Concrete compaction of floors, pillars, and mat foundations
- Up to 45 minutes of run time in power mode and 60 minutes of run time in normal mode (battery not included)
- Compact and ergonomic design at only 77″ long
- Weighs only 10.6 lbs. with battery for reduced operator fatigue (battery not included)
-


$802.99
Features
- Makita-built motor delivers up to 15,500 VPM to help increase strength of concrete
- Two-power mode selection (normal/power) allows the use of the tool for a wide range of job site applications: Concrete compaction of floors, pillars, and mat foundations
- Up to 45 minutes of run time in power mode and 60 minutes of run time in normal mode (battery not included)
- Compact and ergonomic design at only 99″ long
- Weighs only 17.2 lbs. with battery for reduced operator fatigue (battery not included)
-

$6.99
Features
- Marking paint covers more linear feet per can than other brands
- Use on grass, gravel, dirt, concrete, asphalt and more
- Precision tip results in virtually no overspray
- Resists early fading and chalking; lasts up to 30 days