Minimum order quantity is 10
Showing 1–40 of 5537 resultsSorted by popularity
$ 289.88Features:
Full Case Containing 30 Rolls of Tie Wire
Buy from an authorized Max USA Master Distributor
Annealed steel wire – diameter 1.0mm
For use with MAX RB441T TwinTier, RB611T, and RB401T-E TwinTier
$ 7.01Features
Radians RWG538 is made out of 18 gauge green High Performance Polyethylene (HPPE) provides cut resistance
Black foam nitrile palm coating with PVC dots improves abrasion in wet or dry conditions
Seamless cuff design provides a comfortable fit
Tested to EN 388 standards for Abrasion Resistance, Blade Cut, Tear, and Puncture (4 3 4 1)
Reinforced thumb crotch for more strength | ANSI Cut Level A2
$ 0.74Features
Super soft Jelli Snug Plugs are washable and reusable
FDA approved materials are non-toxic
This product is made in the USA
Available with or without nylon cord
NRR 28 dB
Rated 5.00 out of 5
$ 0.00ADD TO CART & CHECK OUT TO REQUEST PRICE QUOTE. Once we receive your request, we will contact you with pricing for this product
Spacing: 6 x 6
W/D Designation: W2.9/W2.9
Gauge: 6/6
Weight: 42LBS
$ 5.78Features
HPPE outer shell with fiberglass
Black foam nitrile coated palm
Seamless cuff design
Load weight of 1510g
Tested to EN 388 standards for Abrasion Resistance, Blade Cut, Tear, and Puncture (4 5 4 4)
$ 4.93Features
RWG701 is ANSI Cut Level A4
Free of Fiberglass or Stainless Steel
EN388:4X43D
$ 0.94Features:
LU-series hangers are tested, load rated and code compliant
The LU series installs using several fastener selections with tested allowable loads
Precision-formed engineered for installation ease and design value
Seat width: 1-9/16 in.
Nominal joist size: 2×8, 2×10
$ 4.07Features:
An indented embedment line ensures accurate embedment depth
Compatible with the Simpson Strong-Tie preassembled TSS snap-in seat
Load rated for wind and seismic forces
20-in. exposed length
Embed 4 in. into a poured concrete bond beam or grouted block wall
$ 0.52Features:
Embossments in bend line strengthen connection
The top flange features an arrow line indicator to aid correct installation
Made from 18-gauge steel
Galvanized (G90) for extra corrosion resistance
$ 3.85Features:
2-Ply, 20 Oz. 100% Cotton Boss Cord?
Clute Cut Design
Rubberized, Water Resistant Safety Cuff
Straight Thumb
$ 1.29Features:
High-Vis Polyester Shell for Comfort & Hand Awareness
Black, Smooth Coated Nitrile Palm Dip Hides Dirt
Good Abrasion & Light Oil Resistance
Knit Wrist
Minimum order quantity: 12
Order in multiples of: 12
$ 5.19Features
The LRU26Z features an open design and ability to field-adjust the slope, ideal for both retrofit or new applications.
May be sloped down from 0° (0:12 pitch) to 49° (14:12). For slopes greater than 45°, allowable downloads are 0.85 of table loads.
May be sloped up from 0° to 45°.
For added versatility, the fasteners on the face of the hanger are placed high, enabling the bottom of the rafter to hang below the ridge beam (see “Max. C1” dimension in Standard Installation table).
Can be installed using nails or Strong-Drive SD Connector screws.
ICC-ES Evaluation Report
$ 3.77TURTLE BACK SPONGE
Minimum order quantity: 24
Order in multiples of: 24
$ 0.66Features
Super soft Jelli Snug Plugs are washable and reusable
FDA approved materials are non-toxic
This product is made in the USA
Flip-top case conveniently stores plugs
Custom imprinting available on case top
$ 0.65Features:
Embossments in bend line strengthen connection
The top flange features an arrow line indicator to aid correct installation
Made from 18-gauge steel
ZMAX galvanization offers extra corrosion resistance for exterior and treated-wood applications
$ 7.10Features
Touchscreen Capabilities in all fingers
18 gauge gray High Performance Polyethylene (HPPE) shell with Stainless Steel provides cut resistance
Black PU palm coating provides protection from abrasion in wet or dry conditions
Seamless design provides a comfortable fit|ANSI Cut Level A5
ANSI Abrasion Level 3
$ 370.85Features:
Wire steel is melted, annealed, and drawn in the U.S.A
Steel mill certification available
For use with MAX RB441T TwinTier and RB401T-E TwinTier
$ 3.79$ 3.99Features:
18 Mil Natural Latex
Crinkled Latex Grip
13″ Rolled Cuff
$ 2.90$ 3.24Features
Crossfire 24Seven ultra Lightweight, Single Lens Design for additional coverage
Flexible Temples for all day comfort
The Crossfire 24Seven hard coat polycarbonate lens protects against scratches
Provides 99.9% UVA and UVB protection
Complies with ANSI Z87.1 standards
$ 19.13Features:
8in Wide by 18 Inches Long
Bar Mount On 48 Inch Power Trowel Machines
Box of 4 Trowel Blades
Longest Lasting Silver Blades
$ 4.19Features:
Breathable Cotton Back
Clute Cut Design
Rubberized Safety Cuff
Straight Thumb
2-Ply Quilted Palm
$ 13.98Features
Radians QHR6 meets ANSI Z89.1 Type 1 Class G & E Standards
Made in the USA
Full Brim
6 Point Ratchet Suspension
Pillowed Brow Pad
SALE 14% OFF
$ 12.90Original price was: $12.90. $ 11.05Current price is: $11.05. Features
Every other tooth is ground thinner for fast cuts
Thicker plate design for improved tracking
Reinforced shoulder for durability and impact resistance
Body slots dissipate heat for long blade life
Minimum order quantity: 10
Order in multiples of: 10
$ 1.13Features:
Anchors mudsill to concrete block, poured walls or slab foundations
Nominal sill size: 2×4, 2×6, 2×8, 2×10, 2×12
Made from 18-gauge steel
ZMAX galvanization offers extra corrosion resistance for exterior and treated-wood applications
$ 22.61FINISHING TROWEL
Minimum order quantity: 4
Order in multiples of: 4
$ 72.37GREEN NYLON CONCRETE BROOM 48in
$ 18.00Features
AT3G10 offers excellent for use in cold weather conditions or applications where fast cure is required
Recognized per ICC-ES AC308 for threaded rod and rebar anchoring, along with post-installed rebar development and splice length design provisions
Conventional blow-brush-blow hole cleaning technique using a wire brush — no power brushing required
Base material installation temperatures down to 0°F (-18°C)
Use in grout-filled CMU construction
$ 5.93Features
Split Cow Hide leather Fingers
Palm Overlay
Short Slip-on Cuff
Lightweight
Breathable Spandex
$ 3.86Features
RWG560 13 gauge HPPE gray outer shell with fiberglass
Black polyurethane coated palm
Load weight of 1995g
Tested to EN 388 standards for Abrasion Resistance, Blade Cut, Tear, and Puncture (4 5 4 3)
RWG560 Flyer
$ 10.99Features
Tough genuine gold pig grain leather palm
Reinforced split pigskin leather palm patch for extra durability
Breathable spandex back provides ultimate comfort and fit
Extra foam added to knuckle area for light bump protection
Wing thumb increases comfort in open-handed work
$ 5.06Features
13 gauge knitted HPPE hi-vis green outer shell with fiberglass and stainless steel
RWG558 features black polyurethane coated palm
Load weight of 5045g
Tested to EN 388 standards for Abrasion Resistance, Blade Cut, Tear, Puncture, TDM-100 (4 X 4 3 F)
$ 1.79Features
Blue polyester/cotton jersey
Knit Wrist helps prevent dirt and debris from entering the glove
Clute cut provides a roomy fit
Straight thumb increases comfort in closed-fisted work
Medium weight provides comfort for light duty hand protection
$ 3.79Features:
Clute Cut Design
Double Woven, 18 oz. Fleece-Out Cotton
Knit Wrist
Straight Thumb
$ 366.10Features:
Galvanized Wire Resists Rust and Corrosion
Steel mill certification available
19 Guage Rebar Tie Wire
For use with MAX RB441T TwinTier and RB401T-E TwinTier
$ 10.99Features:
Aluminum oxide grain
Designed for all ferrous metals
A free cutting wheel with exceptional cut rate and very good life
Triple-reinforced for stability and safety
$ 20.38Features
50% taller (13mm) segments are designed for longer life and faster cutting
Up to 4x longer life than competitive blades
Optimum bond matrix provides a faster, longer lasting, and smoother cutting
Up to 30% smoother cutting than segmented blades
Carefully tensioned for less vibration and a superior user experience
Strict quality control measures ensure superior performance
Dry or wet cutting for added versatility
$ 2.13Features:
Straps are load rated with the correct thickness and number of fasteners, in contrast with field-fabricated straps
Loads have been increased for wind and seismic forces
Floor-to-floor clear span application
For use on the edge of 2x members
Length: 24 in.
![TW1061T-USA [Roll]](https://heyden.dreamhosters.com/wp-content/uploads/2020/11/TW1061T-1000x1000-1-600x600.jpg "TW1061T-USA [Roll]")
![Boss 30SI Cotton Corded Double Palm Glove with Nap-In Finish - Rubberized Safety Cuff [1 pair]](https://heyden.dreamhosters.com/wp-content/uploads/2023/02/30SI-600x600.jpg)
![Boss 1UH7802 Hi-Vis Seamless Knit Polyester Glove with Nitrile Coated Smooth Grip on Palm & Fingers [1 pair]](https://heyden.dreamhosters.com/wp-content/uploads/2023/02/1UH7802_2-600x600.jpg)
![TW1061T-USA [Roll]](https://heyden.dreamhosters.com/wp-content/uploads/2020/07/TW1061T-USA-Front-1-600x600.png "TW1061T-USA [Roll]")
![Boss 1UR1115 Unsupported Latex, Unlined with Crinkle Grip - 18 Mil [1 pair]](https://heyden.dreamhosters.com/wp-content/uploads/2023/02/1UR1115-600x600.jpg)
![Boss 1BC5510 Regular Grade Chore Glove with Double Layer Palm, Cotton Back and Nap-Out Finish - Rubberized Safety Cuff [1 pair]](https://heyden.dreamhosters.com/wp-content/uploads/2023/02/1BC5510-600x600.jpg)
![Caiman 2900 Multi-Activity Glove with Pig Grain Leather Palm with Black Spandex Back [1 pair]](https://heyden.dreamhosters.com/wp-content/uploads/2023/02/2900-600x600.jpg)
![Brahma Gloves WA7534 Premium Blue Jersey, Medium Weight, Knit Wrist, Large [1 pair]](https://heyden.dreamhosters.com/wp-content/uploads/2023/02/07-K300-UP-600x600.jpg)
![Boss 1BC0313 Premium Grade Chore Glove with Single Layer Palm,
Single Layer Back and Nap-Out Finish - Knit Wrist [1 pair]](https://heyden.dreamhosters.com/wp-content/uploads/2023/02/1BC0313-600x600.jpg)
![TW1061T-EG [Roll]](https://heyden.dreamhosters.com/wp-content/uploads/2021/01/TW1061T.jpg)
