[100PCK] Simpson Strong-Tie FB24Z[100PCK] FB ZMAX Galvanized Fence Rail Bracket for 2×4
$41.19Features
- FB24Z preinstallation of brackets allows rails to slide into place easily
- Eliminates need for toe nails or screws
Showing 241–280 of 441 resultsSorted by popularity
-
-
Simpson Strong-Tie CC66 CC Column Cap for 6x Beam 6x Post
$107.39Features
- Certified welds for confidence in strength and loading
- Uplift loads increased for earthquake or wind loading
- Bolt spacing that meets NDS code requirements to ensure optimal performance
- Diamond holes to provide temporary fastening
-
Simpson Strong-Tie BC6 BC Galvanized Post Cap for 6x
$20.99The BC post cap is designed to connect a beam to a post. The 18-gauge material of this post cap makes it ideal for light-duty connections. The BC provides uplift and lateral resistance and includes sizes for both nominal and rough lumber.
-
-
SALE 6% OFF
[50 Pack] Simpson Strong-Tie THD37600H Titen HD 3/8 in. x 6 in. Heavy-Duty Screw Anchor
Original price was: $106.92.$100.50Current price is: $100.50.Features
- THD37600H is tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Standard fractional sizes
- Do not reuse anchor
-
![[5 Pack] Simpson Strong-Tie THD75500H4SS Titen HD 3/4 in. x 5 in. Type 304 Stainless Steel Heavy-Duty Screw Anchor](https://heyden.dreamhosters.com/wp-content/uploads/2022/12/fe7beccebff488653396b015a2d93bdb19169a58-1-600x600.jpg)
[5 Pack] Simpson Strong-Tie THD75500H4SS Titen HD 3/4 in. x 5 in. Type 304 Stainless Steel Heavy-Duty Screw Anchor
$80.00Features
- THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- Installs with an impact wrench or by hand tool
- Tested in accordance with ACI355.2, AC193 and AC106
-
[20 Pack] Simpson Strong-Tie THD50612H4SS Titen HD 1/2 in. x 6-1/2 in. Type 304 Stainless Steel Heavy-Duty Screw Anchor
$195.69Features
- THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- Installs with an impact wrench or by hand tool
- Tested in accordance with ACI355.2, AC193 and AC106
-
![[30 Pack] Simpson Strong-Tie THD37500HC30 Titen HD 3/8 in. x 5 in. Heavy-Duty Screw Anchor](https://heyden.dreamhosters.com/wp-content/uploads/2022/12/A_THD62600H_ProdPho_Pho_Prod_TitenHD-Zinc_C0-7-600x600.jpg)
[30 Pack] Simpson Strong-Tie THD37500HC30 Titen HD 3/8 in. x 5 in. Heavy-Duty Screw Anchor
$68.78Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- Standard fractional sizes
- Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
[100 Pack] Simpson Strong-Tie THDB25178H Titen HD 1/4 in. x 1-7/8 in. Heavy-Duty Screw Anchor
$68.00Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- Standard fractional sizes
- Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
[5 Pack] Simpson Strong-Tie THD75812H6SS Titen HD 3/4 in. x 8-1/2 in. Type 316 Stainless Steel Heavy-Duty Screw Anchor
$138.54Features
- THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- Installs with an impact wrench or by hand tool
- Tested in accordance with ACI355.2, AC193 and AC106
-
[20 Pack] Simpson Strong-Tie THD50400H6SS Titen HD 1/2 in. x 4 in. Type 316 Stainless-Steel Heavy-Duty Screw Anchor
$182.46Features
- THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- Installs with an impact wrench or by hand tool
- Tested in accordance with ACI355.2, AC193 and AC106
-
[20 Pack] Simpson Strong-Tie THD50612H Titen HD 1/2 in. x 6-1/2 in. Heavy-Duty Screw Anchor
$50.40Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- Standard fractional sizes
- Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
![[15 Pack] Simpson Strong-Tie THD50800WH Titen HD 1/2 in. x 8 in. Washer-Head Heavy-Duty Screw Anchor](https://heyden.dreamhosters.com/wp-content/uploads/2022/12/A_THDB62100WH_ProdPho_Pho_Prod_THDWasherHead_C0-1-600x600.jpg)
[15 Pack] Simpson Strong-Tie THD50800WH Titen HD 1/2 in. x 8 in. Washer-Head Heavy-Duty Screw Anchor
$87.26Features
- Tested in accordance with ACI 355.2 and AC193
- Qualified for static, wind and seismic loading conditions
- Available in 1/2″ and 5/8″ diameters
- Standard fractional sizes — the hole size matches the anchor size
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- For added convenience, a 1/2″ socket adapter and (2) T-drive bits are included in each box
- Removable — ideal for temporary anchoring or applications where fixtures may need to be moved
- Washer head allows screw anchor applications incompatible with a hex head
-
[10 Pack] Simpson Strong-Tie THDB62500H4SS Titen HD 5/8 in. x 5 in. Type 304 Stainless-Steel Heavy-Duty Screw Anchor
$106.62Features
- THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- Installs with an impact wrench or by hand tool
- Tested in accordance with ACI355.2, AC193 and AC106
-
[5 Pack] Simpson Strong-Tie THD75500HMG Titen HD 3/4 in. x 5 in. Mechanically Galvanized Heavy-Duty Screw Anchor
$47.92Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- Standard fractional sizes
- Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
![[5 Pack] Simpson Strong-Tie THD75812H Titen HD 3/4 in. x 8-1/2 in. Heavy-Duty Screw Anchor](https://heyden.dreamhosters.com/wp-content/uploads/2022/12/A_THD62600H_ProdPho_Pho_Prod_TitenHD-Zinc_C0-6-600x600.jpg)
[5 Pack] Simpson Strong-Tie THD75812H Titen HD 3/4 in. x 8-1/2 in. Heavy-Duty Screw Anchor
$43.19Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- Standard fractional sizes
- Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
[10 Pack] Simpson Strong-Tie THDB62600H4SS Titen HD 5/8 in. x 6 in. Type 304 Stainless-Steel Heavy-Duty Screw Anchor
$120.00Features
- THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- Installs with an impact wrench or by hand tool
- Tested in accordance with ACI355.2, AC193 and AC106
-
![[25 Pack] Simpson Strong-Tie THD37400CS6SS Titen HD 3/8 in. x 4 in. Type 316 SS Countersunk Head Heavy-Duty Screw Anchor](https://heyden.dreamhosters.com/wp-content/uploads/2022/12/b3d40e526ae041ff4ca2b4995a048052d426f671-2-600x600.jpg)
[25 Pack] Simpson Strong-Tie THD37400CS6SS Titen HD 3/8 in. x 4 in. Type 316 SS Countersunk Head Heavy-Duty Screw Anchor
$158.45Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Standard fractional sizes, hole size same as anchor size
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Removable — ideal for temporary anchoring or applications where fixtures may need to be moved
- 6-lobe drive reduces driver-bit cam-outs, resulting in easier installation
- Countersunk head allows screw anchor applications incompatible with a hex head
- Available in 1/4″ and 3/8″ diameters
-
[25 Pack] Simpson Strong-Tie THDC25300CS6SS Titen HD 1/4 in. x 3 in. Type 316 SS Countersunk Head Heavy-Duty Screw Anchor
$115.52Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Standard fractional sizes, hole size same as anchor size
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Removable — ideal for temporary anchoring or applications where fixtures may need to be moved
- 6-lobe drive reduces driver-bit cam-outs, resulting in easier installation
- Countersunk head allows screw anchor applications incompatible with a hex head
- Available in 1/4″ and 3/8″ diameters
-
[20 Pack] Simpson Strong-Tie THD50400H4SS Titen HD 1/2 in. x 4 in. Type 304 Stainless Steel Heavy-Duty Screw Anchor
$140.62Features
- THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- Installs with an impact wrench or by hand tool
- Tested in accordance with ACI355.2, AC193 and AC106
-
[5 Pack] Simpson Strong-Tie THD75700H6SS Titen HD 3/4 in. x 7 in. Type 316 Stainless Steel Heavy-Duty Screw Anchor
$128.54Features
- THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- Installs with an impact wrench or by hand tool
- Tested in accordance with ACI355.2, AC193 and AC106
-
[10 Pack] Simpson Strong-Tie THDB62800H4SS Titen HD 5/8 in. x 8 in. Type 304 Stainless Steel Heavy-Duty Screw Anchor
$151.23Features
- THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- Installs with an impact wrench or by hand tool
- Tested in accordance with ACI355.2, AC193 and AC106
-
[5 Pack] Simpson Strong-Tie THDT75600H Titen HD 3/4 in. x 6 in. Heavy-Duty Screw Anchor
$27.69Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- Standard fractional sizes
- Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
[20 Pack] Simpson Strong-Tie THD50500HMG Titen HD 1/2 in. x 5 in. Mechanically Galvanized Heavy-Duty Screw Anchor
$92.62Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- Standard fractional sizes
- Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
[20 Pack] Simpson Strong-Tie THDB25312HC20 Titen HD 1/4 in. x 3-1/2 in. Heavy-Duty Screw Anchor
$17.52Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- Standard fractional sizes
- Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
[50 Pack] Simpson Strong-Tie THDB25412CS Titen HD 1/4 in. x 4-1/2 in. Zinc-Plated Countersunk Head Heavy-Duty Screw Anchor
$56.28Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Standard fractional sizes, hole size same as anchor size
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Removable — ideal for temporary anchoring or applications where fixtures may need to be moved
- 6-lobe drive reduces driver-bit cam-outs, resulting in easier installation
- Countersunk head allows screw anchor applications incompatible with a hex head
- Available in 1/4″ and 3/8″ diameters
-
[10 Pack] Simpson Strong-Tie THDB62800H Titen HD 5/8 in. x 8 in. Heavy-Duty Screw Anchor
$63.19Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- Standard fractional sizes
- Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
[20 Pack] Simpson Strong-Tie THD50400H Titen HD 1/2 in. x 4 in. Heavy-Duty Screw Anchor
$36.78Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- Standard fractional sizes
- Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
[30 Pack] Simpson Strong-Tie THD37300HC30 Titen HD 3/8 in. x 3 in. Heavy-Duty Screw Anchor
$46.52Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- Standard fractional sizes
- Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
[50 Pack] Simpson Strong-Tie THDC25200H6SS Titen HD 1/4 in. x 2 in. Type 316 Stainless-Steel Heavy-Duty Screw Anchor
$179.09Features
- THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- Installs with an impact wrench or by hand tool
- Tested in accordance with ACI355.2, AC193 and AC106
-
[25 Pack] Simpson Strong-Tie THD37300CS6SS Titen HD 3/8 in. x 3 in. Type 316 SS Countersunk Head Heavy-Duty Screw Anchor
$144.49Features
- THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- Installs with an impact wrench or by hand tool
- Tested in accordance with ACI355.2, AC193 and AC106
-
[20 Pack] Simpson Strong-Tie THD50500H4SS Titen HD 1/2 in. x 5 in. Type 304 Stainless Steel Heavy-Duty Screw Anchor
$160.00Features
- THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- Installs with an impact wrench or by hand tool
- Tested in accordance with ACI355.2, AC193 and AC106
-
![[50 Pack] Simpson Strong-Tie THD37212CS Titen HD 3/8 in. x 2-1/2 in. Zinc-Plated Countersunk Head Heavy-Duty Screw Anchor](https://heyden.dreamhosters.com/wp-content/uploads/2022/12/b3d40e526ae041ff4ca2b4995a048052d426f671-4-600x600.jpg)
[50 Pack] Simpson Strong-Tie THD37212CS Titen HD 3/8 in. x 2-1/2 in. Zinc-Plated Countersunk Head Heavy-Duty Screw Anchor
$62.17Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Standard fractional sizes, hole size same as anchor size
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Removable — ideal for temporary anchoring or applications where fixtures may need to be moved
- 6-lobe drive reduces driver-bit cam-outs, resulting in easier installation
- Countersunk head allows screw anchor applications incompatible with a hex head
- Available in 1/4″ and 3/8″ diameters
-
[50 Pack] Simpson Strong-Tie THD37600H6SS Titen HD 3/8 in. x 6 in. Type 316 Stainless Steel Heavy-Duty Screw Anchor
$374.62Features
- THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- Installs with an impact wrench or by hand tool
- Tested in accordance with ACI355.2, AC193 and AC106
-
[20 Pack] Simpson Strong-Tie THD50612HMG Titen HD 1/2 in. x 6-1/2 in. Mechanically Galvanized Heavy-Duty Screw Anchor
$114.77Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- Standard fractional sizes
- Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
[25 Pack] Simpson Strong-Tie THD50300H4SS Titen HD 1/2 in. x 3 in. Type 304 Stainless Steel Heavy-Duty Screw Anchor
$155.77Features
- THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- Installs with an impact wrench or by hand tool
- Tested in accordance with ACI355.2, AC193 and AC106
-
[5 Pack] Simpson Strong-Tie THD75700H4SS Titen HD 3/4 in. x 7 in. Type 304 Stainless Steel Heavy-Duty Screw Anchor
$98.69Features
- THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- Installs with an impact wrench or by hand tool
- Tested in accordance with ACI355.2, AC193 and AC106
-
![[50 Pack] Simpson Strong-Tie THD37134H Titen HD 3/8 in. x 1-3/4 in. Heavy-Duty Screw Anchor](https://heyden.dreamhosters.com/wp-content/uploads/2022/12/A_THD62600H_ProdPho_Pho_Prod_TitenHD-Zinc_C0-4-600x600.jpg)
[50 Pack] Simpson Strong-Tie THD37134H Titen HD 3/8 in. x 1-3/4 in. Heavy-Duty Screw Anchor
$40.62Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- Standard fractional sizes
- Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
![[25 Pack] SImpson Strong-Tie THDC25238CS6SS Titen HD 1/4 in. x 2-3/8 in. Type 316 SS Countersunk Head Heavy-Duty Screw Anchor](https://heyden.dreamhosters.com/wp-content/uploads/2022/12/b3d40e526ae041ff4ca2b4995a048052d426f671-3-600x600.jpg)
[25 Pack] SImpson Strong-Tie THDC25238CS6SS Titen HD 1/4 in. x 2-3/8 in. Type 316 SS Countersunk Head Heavy-Duty Screw Anchor
$102.31Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Standard fractional sizes, hole size same as anchor size
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Removable — ideal for temporary anchoring or applications where fixtures may need to be moved
- 6-lobe drive reduces driver-bit cam-outs, resulting in easier installation
- Countersunk head allows screw anchor applications incompatible with a hex head
- Available in 1/4″ and 3/8″ diameters
-
[50 Pack] Simpson Strong-Tie THDB25312CS Titen HD 1/4 in. x 3-1/2 in. Zinc-Plated Countersunk Head Heavy-Duty Screw Anchor
$53.42Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Standard fractional sizes, hole size same as anchor size
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Removable — ideal for temporary anchoring or applications where fixtures may need to be moved
- 6-lobe drive reduces driver-bit cam-outs, resulting in easier installation
- Countersunk head allows screw anchor applications incompatible with a hex head
- Available in 1/4″ and 3/8″ diameters
