“Simpson Strong-Tie APB88R 8×8 Rough Ornamental Post Base ZMAX/PC” has been added to your cart.
View cart
Showing 1–40 of 441 resultsSorted by popularity
$ 0.94
Features:
LU-series hangers are tested, load rated and code compliant
The LU series installs using several fastener selections with tested allowable loads
Precision-formed engineered for installation ease and design value
Seat width: 1-9/16 in.
Nominal joist size: 2×8, 2×10
$ 4.07
Features:
An indented embedment line ensures accurate embedment depth
Compatible with the Simpson Strong-Tie preassembled TSS snap-in seat
Load rated for wind and seismic forces
20-in. exposed length
Embed 4 in. into a poured concrete bond beam or grouted block wall
$ 0.52
Features:
Embossments in bend line strengthen connection
The top flange features an arrow line indicator to aid correct installation
Made from 18-gauge steel
Galvanized (G90) for extra corrosion resistance
$ 5.19
Features
The LRU26Z features an open design and ability to field-adjust the slope, ideal for both retrofit or new applications.
May be sloped down from 0° (0:12 pitch) to 49° (14:12). For slopes greater than 45°, allowable downloads are 0.85 of table loads.
May be sloped up from 0° to 45°.
For added versatility, the fasteners on the face of the hanger are placed high, enabling the bottom of the rafter to hang below the ridge beam (see “Max. C1” dimension in Standard Installation table).
Can be installed using nails or Strong-Drive SD Connector screws.
ICC-ES Evaluation Report
$ 0.65
Features:
Embossments in bend line strengthen connection
The top flange features an arrow line indicator to aid correct installation
Made from 18-gauge steel
ZMAX galvanization offers extra corrosion resistance for exterior and treated-wood applications
$ 1.13
Features:
Anchors mudsill to concrete block, poured walls or slab foundations
Nominal sill size: 2×4, 2×6, 2×8, 2×10, 2×12
Made from 18-gauge steel
ZMAX galvanization offers extra corrosion resistance for exterior and treated-wood applications
$ 18.00
Features
AT3G10 offers excellent for use in cold weather conditions or applications where fast cure is required
Recognized per ICC-ES AC308 for threaded rod and rebar anchoring, along with post-installed rebar development and splice length design provisions
Conventional blow-brush-blow hole cleaning technique using a wire brush — no power brushing required
Base material installation temperatures down to 0°F (-18°C)
Use in grout-filled CMU construction
$ 2.13
Features:
Straps are load rated with the correct thickness and number of fasteners, in contrast with field-fabricated straps
Loads have been increased for wind and seismic forces
Floor-to-floor clear span application
For use on the edge of 2x members
Length: 24 in.
$ 4.09
APLH light hangers connect 2x joists to beams. These concealed-flange hangers feature straight edges and provide a cleaner-looking installation for joist connections. Available in a range of sizes, the hangers install easily with the Outdoor Accents connector screw
$ 9.39
Features
The Avant Collection features straight edges and chamfered corners for a clean, timeless design
Stronger than angled nailing or screw fastening alone for outdoor living or home repair projects
Install with Outdoor Accents connector screws for decorative look and maximum strength (sold separately)
$ 4.09
APLH light hangers connect 2x joists to beams. These concealed-flange hangers feature straight edges and provide a cleaner-looking installation for joist connections. Available in a range of sizes, the hangers install easily with the Outdoor Accents connector screw.
$ 29.10
This item has been DISCONTINUED.
$ 38.59
This item has been DISCONTINUED.
$ 1.08
Features
Cannot be modified
Works for a wide range of applications
Features speed prongs used to temporarily position and secure the connector for easier and faster installation
LUS-series hangers are tested, load rated and code compliant
$ 52.79
Features:
Exceptional performance superior bond-strength values at long-term elevated temperature of 110 degreeF (43 degreeC) using optimized drill bit diameters
Tested and assessed in accordance with ICC-ES AC308 and ACI 355.4 for use in cracked and uncracked normal-weight and lightweight concrete
Design flexibility can be specified for dry or water-saturated conditions when temperatures range from -40 degreeF (-40 degreeC) to 176 degreeF (80 degreeC)
Jobsite versatility can be installed in dry, water-saturated or water-filled holes in base materials with temperatures between 40 degreeF (4 degreeC) and 100 degreeF (38 degreeC)
Maximized production and safety qualified for installation using the Speed Clean? DXS dust extraction drilling system as an alternative to the conventional blow-brush-blow hole-cleaning method
$ 31.49
Features
Can be used where quick-to-install posts are needed, including fencing and mailbox applications
Black powder-coated steel construction for reliable strength and decorative finish
Approved for installation with the Strong-Drive® SDS Connector screw
$ 0.43
Features:
Faster installation than previous drop-in anchor design sets with 40% fewer hammer hits
Positive-set marking system indicates when anchor is properly set
Zinc-plated carbon steel
Length: 2 in.
Drill bit diameter: 5/8 in.
Minimum order quantity: 50
Order in multiples of: 50
$ 46.29
Features
APVB66R is designed to meet stringent building codes for seismic or high-wind events
Slotted for adjustability
Features 1″ standoff to help prevent rot at post end
Outdoor Accents side plates available (see APVBDSP)
Fastener holes are slightly offset to help prevent fastener interference
$ 23.49
APHH heavy hangers connect 4x and 6x beams to girders. These concealed-flange hangers feature straight edges and provide a cleaner-looking installation for joist connections. Available in a range of sizes, the hangers install easily to the joist with the Outdoor Accents® structural wood screw and hex-head washer, and to the header with the Strong-Drive® SDS…
$ 8.09
Features
Installs quickly and easily with our Outdoor Accents 3 1/2″ structural wood screw and Outdoor Accents hex-head washer (sold separately)
Easily attaches knee braces to posts or beams
Adds decorative flair to knee brace connections
$ 15.18
Features
Tested in accordance with ACI 355.2, AC193 and AC106
Qualified for static, wind and seismic loading conditions
Thread design undercuts to efficiently transfer the load to the base material
Standard fractional sizes
Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
Reuse of the anchor will not achieve listed loads and is not recommended
$ 1.22
Features:
Can be used to make a connection to either the top or bottom plate
Embossment in the angle reinforces the plate
Sill plate installation: fill all round holes
Width: 1-3/8 in.
Height: 6-11/16 in.
SALE 8% OFF
$ 270.99 Original price was: $270.99. $ 249.31Current price is: $249.31.
Features:
Tabs inside the MPBZ provide the code-required 1 in. post standoff to help prevent rot from standing water and ground moisture
Stamped indicators and internal tabs identify the required concrete embedment depth
Strategically placed holes simplify installation to allow template attachment
Optional obround holes have been added for attaching trim material
Additional holes at the embedment line allow standing water to exit and a point of visual inspection
$ 101.59
Features
Designed to meet stringent building codes for seismic or high-wind events
Slotted for adjustability
Features 1″ standoff to help prevent rot at post end
Outdoor Accents side plates available
Fastener holes are slightly offset to help prevent fastener interference
$ 5.29
Features
The open design and ability to field-adjust the slope make the LRUZ ideal for both retrofit or new applications.
May be sloped down from 0° (0:12 pitch) to 49° (14:12). For slopes greater than 45°, allowable downloads are 0.85 of table loads.
May be sloped up from 0° to 45°.
For added versatility, the fasteners on the face of the hanger are placed high, enabling the bottom of the rafter to hang below the ridge beam
Can be installed using nails or Strong-Drive® SD Connector screws.
$ 39.72
This item has been DISCONTINUED.- SEE ET3G22-N FOR UPDATED MODEL
$ 6.69
Features
Versatile utility connector for joining wood members together in a corner connection without angled cuts
Fastens with Simpson Strong-Tie® Outdoor Accents 1 1/2″ connector screws (not included)
Easier and stronger than angled fastening
SALE 5% OFF
$ 101.59 Original price was: $101.59. $ 96.51Current price is: $96.51.
Features
Designed to meet stringent building codes for seismic or high-wind events
Slotted for adjustability
Features 1″ standoff to help prevent rot at post end
Outdoor Accents side plates available (see APVBDSP)
Fastener holes are slightly offset to help prevent fastener interference
SALE 14% OFF
$ 43.29 Original price was: $43.29. $ 37.22Current price is: $37.22.
Features
Combined with the Outdoor Accents structural wood screw (SDWSDBB), it provides a structural load-rated solution
Easy to install
Code listed in IAPMO-UES ER-192
$ 155.89
Features
Designed to meet stringent building codes for seismic or high-wind events
Slotted for adjustability
Features 1″ standoff to help prevent rot at post end
Outdoor Accents side plates available
Fastener holes are slightly offset to help prevent fastener interference
$ 9.39
Features
Installs quickly and easily with our Outdoor Accents 3 1/2″ structural wood screw and Outdoor Accents hex-head washer (sold separately)
Easily attaches knee braces to posts or beams
Adds decorative flair to knee brace connections
$ 21.83
Features:
Minimum concrete edge distance is 5 in.
Minimum concrete block left-to-right edge distance is 20 in.
Length: 51 in.
For additional length, an MST strap can be attached using 1/2- bolts through existing holes
Made from 12-gauge steel
$ 3.81
Features:
Available with the bend reversed
Straps do not need to be wrapped over the truss to achieve the allowable load
Versatile with many lengths offered to fit the specific application
Length: 24 in.
Made from 14-gauge steel
$ 28.39
Features
ET3G22-Nis suitable for use under static and seismic loading conditions in cracked and uncracked concrete and masonry
Ideal for general doweling and threaded rod applications
Two-year shelf life for unopened cartridges stored between 45°F (7°C) and 90°F (32°C)
Anchor Technical Notes
$ 18.19
Features
The Avant Collection features straight edges and chamfered corners for a clean, timeless design
Install with Outdoor Accents structural screws and hex-head washer for decorative look (sold separately)
$ 6.09
Features:
Designed to help resist download forces
The unique two-level embossment provides added stiffness to the top flange
Quick installation
Nominal joist size: 2×6
Made from 14-gauge steel
$ 4.69
Features
The Avant Collection features straight edges and chamfered corners for a clean, timeless design
Stronger than angled nailing or screw fastening alone for outdoor living or home repair projects
Install with Outdoor Accents connector screws for decorative look and maximum strength (sold separately)
ZMAX® galvanization with a black powder coat offers extra corrosion resistance for exterior and treated-wood applications
The APVA4 is designed for use with 4x or larger lumber
$ 1.99
Features
The Avant Collection features straight edges and chamfered corners for a clean, timeless design
Stronger than angled nailing or screw fastening alone for outdoor living or home repair projects
Install with Outdoor Accents connector screws for decorative look and maximum strength (sold separately)
SALE 11% OFF
$ 48.19 Original price was: $48.19. $ 42.88Current price is: $42.88.
Features
Material: 12 gauge
APHH610 has a ZMAX galvanized finish with a black powder coat