“Simpson Strong-Tie SDWC15600B-KT Strong-Drive SDWC TRUSS Screw .152 in. x 6 in. T30 Clear-Zinc Coat Orange 500-Qty” has been added to your cart.
View cart
Showing 81–99 of 99 resultsSorted by popularity
$ 266.58Features:
Cap-style head countersinks fully into the double top plate to avoid interference with drywall or finish trades
Wide tolerance on installation angle makes it easy to install the SDWC correctly
Can be installed from inside the structure, eliminating exterior work on the upper stories and enhancing job safety
Fastening can be performed before or after exterior sheathing is applied for added flexibility
Type-17 point for faster starts and easier driving
$ 2.59Features:
Available with the bend reversed; specify –REV- after the model number, such as HTS16-REV
Versatile with many lengths offered to fit the specific application
Straps do not need to be wrapped over the truss to achieve the allowable load
Length: 16 in.
Made from 14-gauge steel
$ 28.25Features:
Cost-effective one-piece design compared to welded hangers
A full-height joist flange that captures the top chord of the joist to prevent rotation and eliminate the need for web stiffeners
Available for special order to accommodate sloped and/or skewed members
Actual joist size: 3-1/2 in. x 14 in.
Made from 14-gauge steel
$ 3.02Features:
Available with the bend reversed; specify –REV- after the model number, such as HTS20-REV
Versatile with many lengths offered to fit the specific application
Straps do not need to be wrapped over the truss to achieve the allowable load
Length: 20 in.
Made from 14-gauge steel
$ 0.24Features:
Quick installation, no nails required
Keeps panels even for a level structural plane
Provides the 1/8-in. space between plywood panels as recommended by the American Plywood Association
Use the same size sheathing clip as the panel thickness
Made from 20-gauge steel
$ 20.15Features:
Chamfered top designed to prevent mushrooming during installation
Qualified for static and seismic loading conditions (seismic design categories A through F)
Suitable for horizontal, vertical and overhead applications
Qualified for minimum concrete thickness of 3-1/4 in., and lightweight concrete-over-steel deck thickness of 2-1/2 in. and 3-1/4 in.
Tested per ACI355.2 and AC193
$ 14.15Features:
Suitable for lighter duty holdown applications on single or double 2x posts
Ties the guardrail post into deck framing
Stronger and safer than nails, lag screws or bolts
Ties the deck into the house for a stronger, safer ledger connection
Helps prevent a common type of deck failure
$ 25.46Features:
Simpson Strong-Tie Connector nails are the best choice for Simpson Strong-Tie connectors
Head ID stamp for easy identification
Smooth shank
Smooth head
Length: 1-1/2 in.
$ 52.37Features:
Eliminates the need to access the floor joists inside the house
Ties the guardrail post into deck framing
Stronger and safer than nails, lag screws or bolts
Ties the deck into the house for a stronger, safer ledger connection
Helps prevent a common type of deck failure
$ 8.29Features:
Designed to help resist download forces
The unique two-level embossment provides added stiffness to the top flange
Quick installation
Seat width: 1-9/16 in.
Height: 9-3/16 in.
$ 2.53Features:
Chamfered top designed to prevent mushrooming during installation
Qualified for static and seismic loading conditions (seismic design categories A through F)
Suitable for horizontal, vertical and overhead applications
Qualified for minimum concrete thickness of 3-1/4 in., and lightweight concrete-over-steel deck thickness of 2-1/2 in. and 3-1/4 in.
Tested per ACI355.2 and AC193
$ 0.87Features:
Great for connecting 2x deck joists on top of a perpendicular beam
Install in pairs on either side of the rafter/truss/joist to provide resistance to uplift and lateral forces
Use also for a variety of connections where one member crosses another
Made from 18-gauge steel
Galvanized (G90) for extra corrosion resistance
$ 7.05Features:
Setting tool for DIAB anchors
For use with Simpson Strong-Tie Drop-In models DIAB50, DIABL50, and DIAB50C
Sets drop-ins for overhead applications
Drop-in anchors are sold separately
Made from carbon steel
$ 6.07Features:
Qualified for static and seismic loading conditions
Thread design undercuts to efficiently transfer the load to the base material
No special drill bit required; designed to install using standard-sized ANSI tolerance drill bits
Testing shows the Titen HD installs in concrete with 50% less torque than competitor anchors
Hex-washer head requires no separate washer and provides a clean installed appearance
$ 2.53Features:
Straps are load rated with the correct thickness and number of fasteners, in contrast with field-fabricated straps
Loads have been increased for wind and seismic forces
Floor-to-floor clear span application
Length: 24 in.
Width: 1-1/4 in.
$ 2.20Features:
Attaches easily to the concrete form for quick installation
Lays flat on the form board so there is no anchor bolt to finish around
No labor costs involved in drilling plates and aligning holes
Flat design eliminates chances of modification in prefabricated walls
Eliminates the need to notch studs due the anchor bolts being placed where it will interfere
$ 27.75Features:
Quick installation, no nails required
Keeps panels even for a level structural plane
Provides the 1/8-in. space between plywood panels as recommended by the American Plywood Association
Use the same size sheathing clip as the panel thickness
Made from 20-gauge steel
$ 13.41Features:
SUR = skewed right
Features obround nail holes on the acute side, allowing nails to be easily installed parallel to the joist
These hangers cannot be modified but will accommodate a 40 degree to 50 degree skewed joist
Available with the acute flange turned in to accommodate end-of-wall installation for solid sawn sizes only (SURC or SULC)
Nominal joist size: 2×6 or 2×8
$ 4.05Features:
Patented double-shear nailing design provides greater strength with fewer nails
Speed prongs for fast and easy installation
Angled joist nailing easier in tight spaces
Do not bend or remove tabs
Nominal joist size: Double 2×8 and Double 2×10
Simpson Strong-Tie SDWC15600B-KT Strong-Drive SDWC TRUSS Screw .152 in. x 6 in. T30 Clear-Zinc Coat Orange 500-Qty 
