“Simpson Strong-Tie MAB15Z MAB 13-1/8 in. ZMAX Galvanized Mudsill Anchor” has been added to your cart.
View cart
Showing all 31 resultsSorted by popularity
$ 1.13
Features:
Anchors mudsill to concrete block, poured walls or slab foundations
Nominal sill size: 2×4, 2×6, 2×8, 2×10, 2×12
Made from 18-gauge steel
ZMAX galvanization offers extra corrosion resistance for exterior and treated-wood applications
$ 29.10
This item has been DISCONTINUED.
$ 38.59
This item has been DISCONTINUED.
$ 52.79
Features:
Exceptional performance superior bond-strength values at long-term elevated temperature of 110 degreeF (43 degreeC) using optimized drill bit diameters
Tested and assessed in accordance with ICC-ES AC308 and ACI 355.4 for use in cracked and uncracked normal-weight and lightweight concrete
Design flexibility can be specified for dry or water-saturated conditions when temperatures range from -40 degreeF (-40 degreeC) to 176 degreeF (80 degreeC)
Jobsite versatility can be installed in dry, water-saturated or water-filled holes in base materials with temperatures between 40 degreeF (4 degreeC) and 100 degreeF (38 degreeC)
Maximized production and safety qualified for installation using the Speed Clean? DXS dust extraction drilling system as an alternative to the conventional blow-brush-blow hole-cleaning method
$ 0.43
Features:
Faster installation than previous drop-in anchor design sets with 40% fewer hammer hits
Positive-set marking system indicates when anchor is properly set
Zinc-plated carbon steel
Length: 2 in.
Drill bit diameter: 5/8 in.
Minimum order quantity: 50
Order in multiples of: 50
$ 39.72
This item has been DISCONTINUED.- SEE ET3G22-N FOR UPDATED MODEL
$ 1.85
Features:
Attaches easily to the concrete form for quick installation
Lays flat on the form board so there is no anchor bolt to finish around
No labor costs involved in drilling plates and aligning holes
Flat design eliminates chances of modification in prefabricated walls
Eliminates the need to notch studs due the anchor bolts being placed where it will interfere
$ 5.53
Features:
Chamfered top designed to prevent mushrooming during installation
Qualified for static and seismic loading conditions (seismic design categories A through F)
Suitable for horizontal, vertical and overhead applications
Qualified for minimum concrete thickness of 3-1/4 in., and lightweight concrete-over-steel deck thickness of 2-1/2 in. and 3-1/4 in.
Tested per ACI355.2 and AC193
SALE 6% OFF
$ 75.99 Original price was: $75.99. $ 71.43Current price is: $71.43.
Features:
Manual dispensing tool
EDT22S features a steel carriage and is engineered for high-volume, continuous use
The tool can be easily convert from dispensing a 22 oz. 1:1 ratio cartridge to a 16.5 oz. 2:1 ratio cartridge
For 22 oz. adhesive cartridges
$ 26.60
Features:
An 18-element mixing nozzle for use with 22 oz. and 56 oz. epoxy adhesive cartridges
This is a one-piece nozzle with integrated nut (separate retaining nut not required)
Once the epoxy hardens in the nozzle it can be used as a cap to keep the product fresh
Each nozzle is 14 in. long for use in all depths of holes
Quantity: 5
$ 2.39
Features:
Anchors mudsill to concrete block, poured walls or slab foundations
Fill CMU cell with concrete grout first, then place MASB into the grouted cell and adjust into position
Attach mudsill to anchor only after the concrete grout cures
Nominal sill size: 2×4, 2×6
Made from 16-gauge steel
$ 4.09
Features:
One-piece, wrap-around clip ensures uniform holding capacity
Threaded end is chamfered for ease of starting nut
Diameter: 5/8 in.
Length: 6 in.
Made from mechanically galvanized carbon steel
$ 5.29
Features:
One-piece, wrap-around clip ensures uniform holding capacity
Threaded end is chamfered for ease of starting nut
Diameter: 5/8 in.
Length: 10 in.
Made from zinc-plated carbon steel
$ 3.37
Features:
One-piece, wrap-around clip ensures uniform holding capacity
Threaded end is chamfered for ease of starting nut
Diameter: 3/4 in.
Length: 6-1/4 in.
Made from zinc-plated carbon steel
$ 35.93
Features:
SDS-plus shank power setting tool for DIAB anchors
For use with Simpson Strong-Tie Drop-In models DIAB50, DIABL50, and DIAB50C
Sets drop-ins for overhead applications
Drop-in anchors are sold separately
Made from carbon steel
$ 0.96
Features:
Bolt diameter: 3/8 in.
Dimensions: 2 in. x 2 in.
Made from 3/16 in. steel
Uncoated steel construction
$ 2.24
Features:
Qualified for static and seismic loading conditions
Thread design undercuts to efficiently transfer the load to the base material
No special drill bit required; designed to install using standard-sized ANSI tolerance drill bits
Testing shows the Titen HD installs in concrete with 50% less torque than competitor anchors
Hex-washer head requires no separate washer and provides a clean installed appearance
$ 5.31
Features:
Qualified for static and seismic loading conditions
Thread design undercuts to efficiently transfer the load to the base material
No special drill bit required; designed to install using standard-sized ANSI tolerance drill bits
Testing shows the Titen HD installs in concrete with 50% less torque than competitor anchors
Hex-washer head requires no separate washer and provides a clean installed appearance
$ 4.20
Features:
Qualified for static and seismic loading conditions
Thread design undercuts to efficiently transfer the load to the base material
No special drill bit required; designed to install using standard-sized ANSI tolerance drill bits
Testing shows the Titen HD installs in concrete with 50% less torque than competitor anchors
Hex-washer head requires no separate washer and provides a clean installed appearance
$ 3.05
Features:
Qualified for static and seismic loading conditions
Thread design undercuts to efficiently transfer the load to the base material
No special drill bit required; designed to install using standard-sized ANSI tolerance drill bits
Testing shows the Titen HD installs in concrete with 50% less torque than competitor anchors
Hex-washer head requires no separate washer and provides a clean installed appearance
$ 2.66
Features:
One-piece, wrap-around clip ensures uniform holding capacity
Threaded end is chamfered for ease of starting nut
Diameter: 3/4 in.
Length: 4-1/4 in.
Made from zinc-plated carbon steel
$ 51.97
Features:
CDT10S Manual dispensing tool
Features a steel carriage for ultimate durability and is engineered for continuous, high-volume use
Double-gripping plates that help extend tool life
For SET3G10 adhesive and other 10 oz. single-cartridge adhesives
$ 6.68
Features:
One-piece, wrap-around clip ensures uniform holding capacity
Threaded end is chamfered for ease of starting nut
Diameter: 5/8 in.
Length: 8-1/2 in.
Made from mechanically galvanized carbon steel
$ 52.89
This item has been DISCONTINUED.
$ 9.51
Features:
One-piece, wrap-around clip ensures uniform holding capacity
Threaded end is chamfered for ease of starting nut
Diameter: 5/8 in.
Length: 10 in.
Made from mechanically galvanized carbon steel
$ 5.54
Features:
Qualified for static and seismic loading conditions
Thread design undercuts to efficiently transfer the load to the base material
No special drill bit required; designed to install using standard-sized ANSI tolerance drill bits
Testing shows the Titen HD installs in concrete with 50% less torque than competitor anchors
Hex-washer head requires no separate washer and provides a clean installed appearance
$ 20.15
Features:
Chamfered top designed to prevent mushrooming during installation
Qualified for static and seismic loading conditions (seismic design categories A through F)
Suitable for horizontal, vertical and overhead applications
Qualified for minimum concrete thickness of 3-1/4 in., and lightweight concrete-over-steel deck thickness of 2-1/2 in. and 3-1/4 in.
Tested per ACI355.2 and AC193
$ 2.53
Features:
Chamfered top designed to prevent mushrooming during installation
Qualified for static and seismic loading conditions (seismic design categories A through F)
Suitable for horizontal, vertical and overhead applications
Qualified for minimum concrete thickness of 3-1/4 in., and lightweight concrete-over-steel deck thickness of 2-1/2 in. and 3-1/4 in.
Tested per ACI355.2 and AC193
$ 7.05
Features:
Setting tool for DIAB anchors
For use with Simpson Strong-Tie Drop-In models DIAB50, DIABL50, and DIAB50C
Sets drop-ins for overhead applications
Drop-in anchors are sold separately
Made from carbon steel
$ 6.07
Features:
Qualified for static and seismic loading conditions
Thread design undercuts to efficiently transfer the load to the base material
No special drill bit required; designed to install using standard-sized ANSI tolerance drill bits
Testing shows the Titen HD installs in concrete with 50% less torque than competitor anchors
Hex-washer head requires no separate washer and provides a clean installed appearance
$ 2.20
Features:
Attaches easily to the concrete form for quick installation
Lays flat on the form board so there is no anchor bolt to finish around
No labor costs involved in drilling plates and aligning holes
Flat design eliminates chances of modification in prefabricated walls
Eliminates the need to notch studs due the anchor bolts being placed where it will interfere