RAPID DRILLING AND CHIPPING in hard concrete with 13.3 J of impact energy
MAINTAIN SPEED UNDER HEAVY LOADS with constant speed electronics
EFFICIENT PERFORMANCE AND RUNTIME with brushless motor and German-engineered mechanism
PRO-GRADE VERSATILITY: Tackle horizontal and downward drilling for #6 – #9 rebar dowel applications, dry coring up to 5 in., chipping in any lower-to-mid wall, bushing, and ground rod driving
REDUCED VIBRATION FOR COMFORTABLE GRIP with SHOCKS™ Active Vibration Control®
Makita-built motor delivers up to 15,500 VPM to help increase strength of concrete
Two-power mode selection (normal/power) allows the use of the tool for a wide range of job site applications: Concrete compaction of floors, pillars, and mat foundations
Up to 45 minutes of run time in power mode and 60 minutes of run time in normal mode
Compact and ergonomic design at only 77″ long
Weighs only 10.6 lbs. with battery for reduced operator fatigue
Makita-built motor delivers up to 15,500 VPM to help increase strength of concrete
Two-power mode selection (normal/power) allows the use of the tool for a wide range of job site applications: Concrete compaction of floors, pillars, and mat foundations
Up to 45 minutes of run time in power mode and 60 minutes of run time in normal mode (battery not included)
Compact and ergonomic design at only 77″ long
Weighs only 10.6 lbs. with battery for reduced operator fatigue (battery not included)
Makita-built motor delivers up to 15,500 VPM to help increase strength of concrete
Two-power mode selection (normal/power) allows the use of the tool for a wide range of job site applications: Concrete compaction of floors, pillars, and mat foundations
Up to 45 minutes of run time in power mode and 60 minutes of run time in normal mode (battery not included)
Compact and ergonomic design at only 99″ long
Weighs only 17.2 lbs. with battery for reduced operator fatigue (battery not included)
Variable 2-speed Hammer Driver-Drill with Makita-built brushless motor delivers (0-650 & 0-2,600 RPM) (0-9,750 & 0-39,000 BPM) and 1,250 in.lbs. of Max Torque
Electronic digital clutch accurately targets desired torque range (41 settings in low speed, 21 settings in high speed)
Active Feedback-sensing Technology (AFT®) turns the motor off if rotation of the accessory is suddenly forced to stop
Impact Driver features 4-speed power selection (0-1,100/ 0-2,100/ 0-3,200/ 0-3,700 RPM & 0-1,400/ 0-2,600/ 0-3,600/ 0-4,100 IPM) provides 1,860 in.lbs. of Max Torque
Tightening Mode (T-mode) for faster tightening of self-drilling screws in thick or thin gauge metal
Makita built brushless motor with two speed, variable speed (0-400 RPM and 0-1,500 RPM) for maximum efficiency and a wide range of drilling applications
Drills up to 6-1/4″ holes with hole saws and 4-5/8″ holes with self feed bits
Weighs only 11.9 lbs. with battery and ergonomic design for operator comfort
Torque limiter; built-in clutch reduces gear damage by disengaging gears if the bit binds
Built-in L.E.D light with pre-glow and afterglow illuminates the work area
Provides spark-free cuts that are clean and burr-free for easy hand-threading of fastener or nut
Up to 1,300 cuts of 3/8” mild steel threaded rod and 1,200 cuts of 3/8” stainless steel threaded rod with one 18V LXT 5.0Ah battery (battery not included)
Ideal for overhead cutting of installed threaded rod including 1/4″ and 3/8″ coarse thread diameter sizes
Ergonomically designed handle provides a more comfortable hand position for increased comfort and less fatigue
Compact design at only 7-7/8″ long and weighs only 7 lbs. with battery (battery not included)
Makita built brushless motor with two speed, variable speed (0-400 RPM and 0-1,500 RPM) for maximum efficiency and a wide range of drilling applications
Drills up to 6-1/4″ holes with hole saws and 4-5/8″ holes with self feed bits
Weighs only 11.9 lbs. with battery and ergonomic design for operator comfort (battery not included)
Torque limiter; built-in clutch reduces gear damage by disengaging gears if the bit binds
Built-in L.E.D light with pre-glow and afterglow illuminates the work area
Makita built brushless motor with two speed, variable speed (0-400 RPM and 0-1,500 RPM) for maximum efficiency and a wide range of drilling applications
Drills up to 6-1/4″ holes with hole saws and 4-5/8″ holes with self feed bits
Weighs only 12.8 lbs. with battery and ergonomic design for operator comfort (battery not included)
Torque limiter; built-in clutch reduces gear damage by disengaging gears if the bit binds
Built-in L.E.D light with pre-glow and afterglow illuminates the work area
423HH Marshalltown Broom Concrete
1 × $114.86 
Diablo DS0614BGP5 6" Reciprocating Blade for Wood, Metal, Plastic - 5 PACK
1 × $10.69 
429HH Marshalltown Broom Concrete
1 × $259.14 
GRV02Z 40V max XGT Brushless Cordless 8' Concrete Vibrator, Tool Only
1 × $802.99 
