“GSC01Z 40V max XGT Brushless Cordless 7‑1/4″ Metal Cutting Saw, with Electric Brake and Chip Collector Tool Only” has been added to your cart.
View cart
Showing 601–640 of 976 resultsSorted by popularity
$ 730.99
Features
Makita-built brushless motor along with 40V max XGT® battery combine to deliver the power performance required for heavy-load application
Constant speed control automatically applies additional power under load for optimum performance
Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears during a bind-up situation
XGT® technology delivers up to 135 of 3/8″ holes per charge using full charged 40V XGT® 4.0Ah battery*
Quick change chuck allows for interchangeability from SDS-PLUS to 1/2″ keyless chuck for utilization of straight shank bits
$ 854.99
Features
X2 LXT® technology delivers up to 140 1/2″ x 2-3/8″ holes per charge using two 18V LXT® 5.0Ah batteries
Powerful BL™ Brushless motor delivers 0-980 RPM, 0-5,000 BPM and 2.3 ft.lbs. of impact energy to handle the most demanding applications
Dust extraction capability with optional OSHA Table 1 compliant On-Board Dust Extractor Attachment
Anti-Vibration Technology (AVT®) is an active internal counterbalance system which is engineered to reduce vibration for increased comfort
Vibration-absorbing back handle and side handle further reduce vibration and increase comfort on the job
$ 435.99
Features
Efficient BL™ Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
The BL™ Brushless Motor eliminates carbon brushes, enabling the BL™ Motor to run cooler and more efficiently for longer life
Compact and ergonomic design at only 12-7/8″ long
Weighs only 7.2 lbs. with battery (battery not included) for reduced operator fatigue
Variable speed trigger enables user to match the speed to application for greater versatility
$ 228.99
Features
Makita-built variable speed motor delivers 0-1,200 RPM and 0-4,000 BPM
3-mode operation for “Rotation Only”, “Hammering with Rotation” or “Hammering Only” for multiple applications
Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
Faster drilling with synchronized RPM and BPM
Job site tested shock absorbent handle protects the battery housing for extra durability
$ 501.99
Features
Makita- build brushless motor delivers up to 35% faster cutting speed
The digital communication within XGT® optimizes performance to provide up to 2X longer sustained power under heavy-load applications
Metal reinforced gear shaft and self-lubricating slider for increased durability
Makita-built variable 2-speed brushless motor delivers 0-2,300 (Low) and 0-3,000 (High) strokes per minute
Long 1-1/4″ stroke length provides increased cutting efficiency
$ 502.99
Features
Powered by two LXT batteries; X2 LXT technology delivers more power, speed and run time without the hassles of a cord
Makita-built electronically controlled brushless motor delivers 5,100 RPM for maximum performance and 50% longer run time per charge
The brushless motor eliminates carbon brushes, enabling the motor to run cooler and more efficiently for longer life
Automatic Speed Change™ technology adjusts cutting speed and torque during cut for optimum performance
X2 LXT technology delivers up to 558 crosscuts per charge in 2×4 SPF lumber and up to 291 crosscuts per charge in 2×10 SPF lumber using the two 5.0Ah batteries
XSR01PT Tech sheet
$ 637.99
Features
Selectable horizontal/vertical cross reference lines required for level, align and plumb applications
Up to 10 hours of continuous run time using included Makita 12V max CXT® 2.0Ah rechargeable battery; up to 20 hours of continuous run time using a 12V max CXT® 4.0Ah battery
Green line visibility range up to 115’ depending on ambient light and detectable up to 262′ with Makita Laser Detector LE00855702 (sold separately)
Bright 525 nm class II green laser for best-in-class visibility with +/-1/8” at 33’ for best-in-class accuracy
Laser line fan angle spans past the 180° horizontal line and 160° vertical line positions for full reference line coverage
SALE 18% OFF
$ 197.99 Original price was: $197.99. $ 162.35Current price is: $162.35.
Features
Equipped with Bluetooth® to wirelessly connect your mobile device
Lantern delivers up to 310 lumens in a 360° pattern
High-luminance L.E.D. flashlight provides 200 lumens
Push-button operated digital tuner with 9 programmable stations for FM radio
Radio runs up to 28 hours; Lantern runs 16 hours; Lantern and Radio run 10 hours with an 40V max XGT® 2.5Ah battery (battery not included)
$ 178.99
Features
4-mode operation: delivering 600 lumens on Spot, 1,000 lumens on Flood, 1,250 lumens on Spot/Flood, and Strobe mode
Illuminates up to 640 yards in Spot and Spot/Flood mode
Up to 10 hours of continuous illumination in Spot mode with 4.0Ah 40V max XGT® battery (battery not included)
90º pivoting head for user convenience
Extreme Protection Technology (XPT™) is engineered for improved dust and water resistance for operation in harsh conditions
$ 120.99
Features
High-luminance 18 L.E.D. flashlight provides 500 lumens on high
3-mode operation: delivers 500 lumens on High, 250 lumens on Medium, and 100 lumens on Low
Flashlight head folds up and down with 7 positive stops and rotates left to right for multiple lighting angles
Up to 82 hours of illumination with 4.0Ah 40V max XGT® Battery (battery sold separately)
Up to 51 hours of illumination with 2.5Ah 40V max XGT® Battery (battery sold separately)
$ 72.99
Features
High-luminance 4 L.E.D. flashlight provides 160 lumens
170° pivoting head with 12 positive stops
Up to 55 hours of illumination with 4.0Ah 40V max XGT® Battery (battery sold separately)
Up to 34 hours of illumination with 2.5Ah 40V max XGT® Battery (battery sold separately)
Metal hang hook is convenient and job site durable
$ 97.99
Features
360° lantern mode provides 710 lumens; 180° lantern mode provides 340 lumens; flashlight mode provides 130 lumens
Built-in USB port for charging portable electronic devices
Metal hang hook swivels 360° and folds away for added convenience
Up to 10 hours of continuous illumination in 360° lantern mode with 2.5Ah 40V max XGT® Battery (battery sold separately)
Up to 18 hours of continuous illumination in 180° lantern mode with 2.5Ah 40V max XGT® Battery (battery sold separately)
$ 435.99
Features
3-mode operation: delivers 10,000 lumens on High, 4,000 lumens on medium, and 2,000 lumens on Low
Up to 2.4 hours of continuous illumination with two 4.0Ah 40V max XGT® batteries on high (batteries and charger not included)
Up to 14 hours of continuous illumination with two 4.0Ah 40V max XGT® batteries on low (batteries and charger not included)
Dust and water-resistant construction (IP65 rated) for improved operation in harsh job site conditions
L.E.D. lights effectively illuminate work area without the high heat of halogens
$ 271.99
Features
3-mode operation: delivers 3,600 lumens on High, 1,800 lumens on Medium, and 900 lumens on Low
Up to 3.5 hours of continuous illumination with a 4.0Ah 40V max XGT® battery on high (battery and charger not included)
Up to 15 hours of continuous illumination with a 4.0Ah 40V max XGT® battery on low (battery and charger not included)
Dust and water-resistant construction (IP65 rated) for improved operation in harsh job site conditions
L.E.D. lights effectively illuminate work area without the high heat of halogens
$ 212.99
Features
2-mode operation: delivers 1,100 lumens on High and 450 lumens on Low
Up to 22 hours of continuous illumination on low with a 4.0Ah 40V max XGT® (battery and charger not included)
Up to 10 hours of continuous illumination on high with a 4.0Ah 40V max XGT® (battery and charger not included)
Compatible with Makita® 40V max XGT® and 18V LXT® batteries (batteries not included)
Dust and water-resistant construction (IP65 rated) for improved operation in harsh job site conditions
$ 920.99
Features
Makita-built brushless motor delivers up to 2X faster cutting performance*
Active Feedback-Sensing Technology (AFT®) electronically turns off the motor if rotation of bit is suddenly forced to stop
XPT is engineered to provide increased dust and water resistance in harsh jobsite conditions
Large 2-5/8″ cutting capacity in various metal materials including pipe, stud, channel, strut, conduit, angle, square tubing, sheet metal, and more
Makita-built brushless motor delivers up to 160 cuts per charge in 2-1/2″ x 2-1/2′ x 1/4″ steel angle using a 40V max XGT® 4.0Ah Battery
$ 655.99
Features
Makita-built brushless motor delivers up to 2X faster cutting performance*
Active Feedback-Sensing Technology (AFT®) electronically turns off the motor if rotation of blade is suddenly forced to stop
XPT is engineered to provide increased dust and water resistance in harsh job site conditions
Large 2-5/8″ cutting capacity in various metal materials including pipe, stud, channel, strut, conduit, angle, square tubing, sheet metal, and more
Makita-built brushless motor delivers up to 160 cuts per charge in 2-1/2″ x 2-1/2′ x 1/4″ steel angle using a 40V max XGT® 4.0Ah Battery (battery not included)
$ 898.99
Features
Variable 2-speed Hammer Driver-Drill with Makita-built brushless motor delivers (0-650 & 0-2,600 RPM) (0-9,750 & 0-39,000 BPM) and 1,250 in.lbs. of Max Torque
Impact Driver features 4-speed power selection (0-1,100/ 0-2,100/ 0-3,200/ 0-3,700 RPM & 0-1,100/ 0-2,600/ 0-3,600/ 0-4,400 IPM) provides 1,950 in.lbs. of Max Torque
7-1/4″ Circular Saw Makita-built brushless motor delivers 6,000 RPM for faster cutting and ripping; cuts 2-5/8″ at 90°
High-luminance 4 L.E.D. flashlight provides 160 lumens
XPT is engineered to provide increased dust and water resistance in harsh job site conditions
$ 462.99
Features
Makita-built brushless motor delivers 4,000 RPM for up to 2X faster cutting than corded
The digital communication within XGT® optimizes performance to provide up to 2X longer sustained power under heavy-load applications
XPT™ is engineered to provide increased dust and water resistance in harsh jobsite conditions
Extra Large 3-3/4″ cutting capacity at 90°; cuts 4X material in a single pass
Up to 150 cuts per charge in 4×4 SPF lumber on a single charge of a 4.0Ah battery (battery not included)
$ 672.99
Features
Makita-built brushless motor delivers 4,000 RPM for faster cutting than corded
The digital communication within XGT® optimizes performance to provide up to 2X longer sustained power under heavy-load applications
XPT™ is engineered to provide increased dust and water resistance in harsh jobsite conditions
Extra Large 3-3/4″ cutting capacity at 90°; cuts 4X material in a single pass
Up to 150 cuts per charge in 4×4 SPF lumber on a single charge of a 4.0Ah battery
$ 324.99
Features
Makita-built brushless motor delivers up to 6,400 RPM for faster cutting performance
Automatic Torque drive adjusts cutting speed under load for optimum cutting performance
XPT™ is engineered to provide increased dust and water resistance in harsh jobsite conditions
Up to 375 cuts per charge in 2X4 SPF lumber (battery no included)
Power of a 15 AMP corded*
$ 527.99
Features
delivers up to 6,400 RPM for faster cutting performance
adjusts cutting speed under load for optimum cutting performance
increased dust and water resistance
cutting depth allows cutting of 3X lumber in a single pass
Electric brake
GSR01M1 Instruction Manual
$ 457.99
Features
Makita-built brushless motor delivers 6,000 RPM for faster cutting performance
Automatic torque drive adjusts cutting speed under load for optimum cutting performance
XPT™ is engineered to provide increased dust and water resistance in harsh jobsite conditions
0-56° bevel capacity with positive stops at 22.5°, 45°
Large 2-3/8″ cutting capacity at 90°
$ 324.99
Features
Makita-built brushless motor delivers 6,000 RPM for faster cutting performance
Automatic Torque drive adjusts cutting speed under load for optimum cutting performance
XPT™ is engineered to provide increased dust and water resistance in harsh jobsite conditions
Large 2-5/8″ cutting capacity at 90°; cuts 3X material in a single pass
0-56° bevel capacity with positive stops at 22.5°, 45°, and 56°
$ 681.99
Features
Makita-built brushless motor delivers 6,000 RPM for faster cutting performance
Automatic torque drive adjusts cutting speed under load for optimum cutting performance
XPT™ is engineered to provide increased dust and water resistance in harsh jobsite conditions
0-56° bevel capacity with positive stops at 22.5°, 45°
Large 2-3/8″ cutting capacity at 90°
$ 538.99
Features
Makita-built brushless motor with variable speed control dial (2,500 – 4,900 RPM) for faster cutting performance
The digital communication within XGT® optimizes performance to provide up to 2X longer sustained power under heavy-load applications
The digital communication within XGT® actively monitors and protects against overload, over-discharge and overheating
Large cutting capacity 2-3/16″ at 90º; and 1-9/16″ at 45º
Bevel capability (-1º to 48º) with positive stops at 22.5º and 45º
$ 802.99
Features
Makita-built brushless motor with variable speed control dial (2,500 – 4,900 RPM) for faster cutting performance
The digital communication within XGT® optimizes performance to provide up to 2X longer sustained power under heavy-load applications
The digital communication within XGT® actively monitors and protects against overload, over-discharge and overheating
Large cutting capacity 2-3/16″ at 90º; and 1-9/16″ at 45º
Bevel capability (-1º to 48º) with positive stops at 22.5º and 45º
$ 714.99
Features
Makita-built brushless motor delivers 3,500 RPM for faster cutting performance
Constant speed control automatically applies additional power under load for optimum performance
XPT™ is engineered to provide increased dust and water resistance in harsh jobsite conditions
Bevel cut capacity up to 1° left and 60° right with positive stops at 22.5°, 45°
Large 3-13/16″ cutting capacity at 90°
$ 700.99
Features
Outpower: Makita-built brushless motor delivers 4,000 RPM for faster cutting performance
Outsmart: Constant speed control automatically applies additional power under load for optimum performance
Outlast: XPT™ is engineered to provide increased dust and water resistance in harsh jobsite conditions
Bevel cut capacity up to 1° left and 60° right with positive stops at 22.5°, 45°
Large 3-3/8″ cutting capacity at 90°
SALE 4% OFF
$ 527.99 Original price was: $527.99. $ 506.87Current price is: $506.87.
Features
12 AMP motor with variable speed control dial (2,000 – 5,200 RPM) for optimum performance in a variety of materials
Large cutting capacity (2-3/16″ at 90° and 1-9/16″ at 45°)
Bevel capability (-1 to 48°) with positive stops at 22.5° and 45°
Close to the wall cutting (11/16″) for expanded cutting applications
Ideal for cutting large wood panels and other wood materials in confined areas
SP6000J Instruction Manual
$ 202.99
Features
Hypoid gears deliver more power and have greater surface contact than conventional worm drive gears
Powerful 15 AMP motor for increased productivity
Oil bath technology and sealed gear housing for less maintenance
0°-51.5° bevel capacity with positive stops at 45° and 51.5° is ideal for truss and rafter cut-outs
High quality, heat treated hypoid gears are engineered for long lasting performance
$ 1,292.99
Features
Makita 5402NA features a powerful 15 AMP motor and delivers 2,300 RPM for enough power to cut through pressure treated lumber
Cuts 6x material at 90° and 4x material at 45° in a single pass
Weighs only 32.1 lbs. for increased operator comfort
Electric brake for maximum productivity
Ideal for cutting large timber, pressure treated lumber and wood logs
$ 821.99
Features
Powerful 14 AMP motor delivers 3,800 RPM with power to cut beams and timber
Well balanced and weighs only 20.3 lbs. for increased operator comfort
Precision gearing with ball and needle bearing construction for smooth and efficient power transmission
Electric brake for maximum productivity
Large cutting and bevel capacity (3-3/4″ at 90° and 2-3/4″ at 45°)
$ 341.99
Features
Magnesium components create a lightweight saw (11.4 lbs.) that is well balanced and job site tough
Large cutting capacity (3″ at 90°) and bevel capacity (0°-50°) with positive stops at 22.5° and 45°
Two built-in L.E.D. lights illuminate the line of cut for increased accuracy
Electric brake for maximum productivity
Powerful 15.0 AMP motor delivers 5,200 RPM for proven performance
$ 195.00
Features
Magnesium components create a lightweight saw (10.6 lbs.) that is well balanced and jobsite tough
Powerful 15.0 AMP motor delivers 5,800 RPM for proven performance and job site durability
Large cutting capacity (2-1/2″ at 90°) and bevel capacity (0°-56°) with positive stops at 22.5°, 45°, and 56°
Large rubberized levers for quick and easy one-handed adjustments
Ergonomically designed rubberized handle for better fit and added comfort
$ 222.99
Features
Powerful 15 AMP motor delivers 5,800 RPM for proven performance and job site durability)
Electric brake for maximum productivity)
Lower guard design improves performance when making bevel and narrow cuts)
Large cutting capacity (2-3/8″ at 90°, 1-3/4″ at 45°))
Two built-in L.E.D. lights illuminate the line of cut for increased accuracy)
$ 541.99
Features
Makita MAC5200 features a cast iron pump with Big Bore™ cylinder and piston is engineered to provide faster recovery time for improved performance
Powerful 3.0 HP motor produces 6.5 CFM at 90 PSI for increased productivity
Pump is oil-lubricated for cooler running temperatures and reduced wear
Durable cast iron cylinder reduces wear and increases pump life; removable for easy maintenance
Folding handle with low profile design for easy storage with handle folded
MAC5200 Instruction manual
$ 310.99
Features
Cast iron pump with Big Bore cylinder and piston
Lower noise (80dB) and improved pump durability
Low AMP draw reduces incidences of tripped breakers at start-up
Pump is oil-lubricated for cooler running temperatures and reduced wear
Mac700 Instruction manual
$ 264.99
Features
Powerful 1/6 maximum horsepower induction motor provides up to 125 PSI
Lightweight design (23.1 lbs.) for increased job site portability
Low noise for operator comfort; ideal for indoor use
Low AMP draw reduces incidents of tripped breakers at start-up
Roll cage construction for extra protection of pump and motor assembly
$ 139.71
Features
4-mode operation: delivering 600 lumens on Spot, 1,000 lumens on Flood, 1,250 lumens on Spot/Flood, and Strobe mode
Illuminates up to 700 yards in Spot and Spot/Flood mode
Up to 7 hours of continuous illumination in Spot mode with 5.0Ah 18V LXT® battery (battery not included)
90º pivoting head for user convenience
Extreme Protection Technology (XPT™) is engineered for improved dust and water resistance for operation in harsh conditions