BFB54 Marshalltown Broom float 
RED704433 Marshalltown Adapter Broom Extension Poly 
NBSCF Marshalltown New Brick Soldier Coarse flex
$120.32NEW BRICK SOLDIER COURSE FLEX
Showing 801–840 of 930 resultsSorted by popularity
-
-
-
CHSCBF Marshalltown OLD CHIC.SOLDIER CRSE BR FLX mat flex
$130.34OLD CHIC.SOLDIER CRSE BR FLX MAT FLEX
-
-
-
-
-
CHPAT18 Marshalltown OLD Chicago/Pennsylvania texture skin 18X18
$120.32OLD CHICAGO/PENNSYLVANIA TEXTURE SKIN, 18X18
-
PAHBRKF Marshalltown Pennsylvania Herringbone Brick FLX mat flex
$250.62PENN. HERRINGBONE BRICK FLX MAT FLEX
-
-
PABRKF Marshalltown Pennsylvania Avenue Brick flex mat flex
$240.62PENN. AVENUE BRICK FLEX MAT FLEX
-
-
SALE 14% OFF
CHRBBF Marshalltown OLD Chicago RUN. Bond BR FLX Mat Flex
Original price was: $220.57.$189.69Current price is: $189.69.Features
- CHRBBF has a 15 day lead time before shipping
- 30¾” x 21½” stamp
- Grout lines are ¼”-½” deep
OLD CHICAGO RUN. BOND BR FLX MAT FLEX
-
-
HERRBRKF Marshalltown New Herringbone Brick flex mat flex
$220.57NEW HERRINGBONE BRICK FLEX MAT FLEX
-
-
-
-
-
BWBrickF Marshalltown New Basket Weave Brick FLX Mat Flex
$216.64Features
- BWBrickF has a 15 day lead-time before shipping
- 30½” x 15½” stamp size
- Grout lines are ½” deep
NEW BASKET WEAVE BRICK FLX MAT FLEX
-
-
WALNUTLE Marshalltown Walnut Live edge wood Slab Mold 8′
$1,082.29WALNUT LIVE EDGE WOOD SLAB MOLD 8ft
-
-
-
BMSLEG Marshalltown Concrete Bench Mold Leg
$473.14Features
- Durable urethane mold
- Bench Mold Planks sold separately
- Each plank requires one hardware kit to anchor to legs or backrest (includes 4 bolts and 4 anchors)
BMSLEG Spec sheet
BENCH MOLD LEG -
-
-
-
Simpson Strong-Tie WSV134S Strong-Drive WSV SUBFLOOR Screw Collated 9 x 1-3/4 in. T-25 Yellow-Zinc 2000-Qty
$132.72Features:
- Redesigned tip and thread pattern provides easy starts and up to 25% less torque while driving makes for up to 20% faster driving
- Less installation torque also means less wear on tools
- Deep 6-lobed recessed ribbed head provides clean countersinking and more secure bit retention for fewer cam-outs
- The holding power of WSV screws reduces the gaps between the joist and subfloor that cause floor squeaks
- WSV screws can be easily backed out, allowing for future access to floor cavities
-
Simpson Strong-Tie BC46Z BC ZMAX Galvanized Post Cap for 4×6
$13.95Features:
- Provides a positive connection for a post to a wood deck
- Stronger than angled nailing or screw fastening
- Reduces the chance of the post splitting and eliminates nailing into end grain
- Not recommended for non top-supported installations (such as fences or unbraced carports)
- Nominal post size: 4×6
-
Simpson Strong-Tie HRS12 HRS 12 in. 12-Gauge Galvanized Heavy Strap Tie
$4.20Features:
- A versatile, heavy-duty strap for a variety of connections and splices where extra strength is needed
- Straight lines and chamfered edges offer a better appearance
- Provides support in home repair and construction projects
- Easy nailing pattern for connecting the sides of 2x members
- Width: 1-3/8 in.
-
Simpson Strong-Tie SUL26Z SUL ZMAX Galvanized Joist Hanger for 2×6 Skewed Left
$13.41Features:
- SUL = skewed left
- Features obround nail holes on the acute side, allowing nails to be easily installed parallel to the joist
- These hangers cannot be modified but will accommodate a 40 degree to 50 degree skewed joist
- Available with the acute flange turned in to accommodate end-of-wall installation for solid sawn sizes only (SURC or SULC)
- Nominal joist size: 2×6 or 2×8
-
SALE 4% OFF
Simpson Strong-Tie SSDWP3S305 Deck-Drive DWP WOOD SS Screw Collated 10 x 3 in. T25 6-Lobe Type 305 1000-Qty
Original price was: $308.77.$296.41Current price is: $296.41.Features:
- Flat head
- SSDWP3S305 has a unique box thread design with raised-ridge technology greatly reduces driving torque
- Specially designed sharp point penetrates hard wood products with ease
- 6-lobe drive helps prevent driver-bit cam-out while driving easier and extending bit life (replacement bit BITTX25)
- Length: 3 in.
-
Simpson Strong-Tie MASB MASB 16-Gauge Galvanized Masonry Mudsill Anchor
$2.39Features:
- Anchors mudsill to concrete block, poured walls or slab foundations
- Fill CMU cell with concrete grout first, then place MASB into the grouted cell and adjust into position
- Attach mudsill to anchor only after the concrete grout cures
- Nominal sill size: 2×4, 2×6
- Made from 16-gauge steel
-
Simpson Strong-Tie HTT5 11-Gauge Galvanized Heavy Tension Tie, 16 in.
$32.01Features:
- Ideal for retrofit or new construction projects
- Can be installed with cast-in-place or post-installed anchor bolts
- Four-ply formed steel provides increased tension capacity
- Anchor bolt washers not required
- 2-1/2 in. width x 16 in. length
-
Simpson Strong-Tie LUS28Z LUS ZMAX Galvanized Face-Mount Joist Hanger for 2×8
$1.89Features:
- Patented double-shear nailing design provides greater strength with fewer nails
- Speed prongs for fast and easy installation
- Angled joist nailing easier in tight spaces
- Do not bend or remove tabs
- Nominal joist size: 2×8 and 2×10
-
Simpson Strong-Tie PDPAWL-250 .157 in. x 2-1/2 in. Powder-Actuated Pin w/ 1 in. Washer
$17.17Features:
- The minimum effective shank length must equal or exceed the sum of the thickness of the attached material and the minimum embedment depth
- Code listed per ICC-ES ESR-2138, Florida FL15730 and LA RR25469
- Compatible with Simpson Strong-Tie powder-actuated tool systems as well as other common tools
- .300-in. head diameter / .157-in. shank diameter
- 1-in. washer
-
Simpson Strong-Tie LUC210Z LUC ZMAX Galvanized Face-Mount Concealed-Flange Joist Hanger for 2×10
$3.03Features:
- LUC-series hangers are tested, load rated and code compliant
- The LUC series installs using several fastener selections with tested allowable loads
- Suitable for nominal 2×10 and 2×12 lumber
- Made from 18-gauge steel
- ZMAX galvanization offers extra corrosion resistance for exterior and treated-wood applications
-
Simpson Strong-Tie WSV212S Strong-Drive WSV SUBFLOOR Screw Collated 9 x 2-1/2 in. T25 Yellow-Zinc 1500-Qty
$189.99Features:
- Redesigned tip and thread pattern provides easy starts and up to 25% less torque while driving makes for up to 20% faster driving
- Less installation torque also means less wear on tools
- Deep 6-lobed recessed ribbed head provides clean countersinking and more secure bit retention for fewer cam-outs
- The holding power of WSV screws reduces the gaps between the joist and subfloor that cause floor squeaks
- WSV screws can be easily backed out, allowing for future access to floor cavities
-
Simpson Strong-Tie WA62600MG Wedge-All 5/8 in. x 6 in. Mechanically Galvanized Expansion Anchor
$4.09Features:
- One-piece, wrap-around clip ensures uniform holding capacity
- Threaded end is chamfered for ease of starting nut
- Diameter: 5/8 in.
- Length: 6 in.
- Made from mechanically galvanized carbon steel
