“Simpson Strong-Tie APB44 Adjustable Post Base” has been added to your cart.
View cart
Showing 41–80 of 930 resultsSorted by popularity
-
SALEÂ 14% OFF
$43.29 Original price was: $43.29.$37.22Current price is: $37.22.
Features
- Combined with the Outdoor Accents structural wood screw (SDWSDBB), it provides a structural load-rated solution
- Easy to install
- Code listed in IAPMO-UES ER-192
-
$155.89
Features
- Designed to meet stringent building codes for seismic or high-wind events
- Slotted for adjustability
- Features 1″ standoff to help prevent rot at post end
- Outdoor Accents side plates available
- Fastener holes are slightly offset to help prevent fastener interference
-
$9.39
Features
- Installs quickly and easily with our Outdoor Accents 3 1/2″ structural wood screw and Outdoor Accents hex-head washer (sold separately)
- Easily attaches knee braces to posts or beams
- Adds decorative flair to knee brace connections
-
$0.00
FEATURES/BENEFITS
- Available in 10 mil and 15 mil thicknesses, in 200′ (61 m) long rolls.
- Helps reduce the penetration of moisture and water vapor through the slab into the structure.
- Helps reduce fungus, mildew, and mold.
- Helps reduce radon gas from entering a structure.
- Resistant to methane gas.
- Tough enough to withstand normal construction jobsite conditions and traffic … will not crack, puncture, snag, split, or tear easily.
- Installs quickly and easily over tamped grade … no gravel, fill, or sand needed.
- 12′ (15 mil) and 15′ (10 mil) wide rolls require fewer seams in application.
- PERMINATOR prevents uncontrolled moisture from entering the slab allowing the slab to maintain the maximum slab moisture emission rate and relative humidity level as allowed by flooring manufacturer’s specifications.
- 10 or 15 mil thickness clearly marked on membrane for easy visual identification on jobsite.
- VOC content is 0 g/L.
- Made in America.
-
-
$21.83
Features:
- Minimum concrete edge distance is 5 in.
- Minimum concrete block left-to-right edge distance is 20 in.
- Length: 51 in.
- For additional length, an MST strap can be attached using 1/2- bolts through existing holes
- Made from 12-gauge steel
-
$3.81
Features:
- Available with the bend reversed
- Straps do not need to be wrapped over the truss to achieve the allowable load
- Versatile with many lengths offered to fit the specific application
- Length: 24 in.
- Made from 14-gauge steel
-
$28.39
Features
- ET3G22-Nis suitable for use under static and seismic loading conditions in cracked and uncracked concrete and masonry
- Ideal for general doweling and threaded rod applications
- Two-year shelf life for unopened cartridges stored between 45°F (7°C) and 90°F (32°C)
Anchor Technical Notes
-
$18.19
Features
- The Avant Collection features straight edges and chamfered corners for a clean, timeless design
- Install with Outdoor Accents structural screws and hex-head washer for decorative look (sold separately)
-
$6.09
Features:
- Designed to help resist download forces
- The unique two-level embossment provides added stiffness to the top flange
- Quick installation
- Nominal joist size: 2×6
- Made from 14-gauge steel
-
$0.00
ADD TO CART & CHECK OUT TO REQUEST PRICE QUOTE. Once we receive your request, we will contact you with pricing for this product
-
$4.69
Features
- The Avant Collection features straight edges and chamfered corners for a clean, timeless design
- Stronger than angled nailing or screw fastening alone for outdoor living or home repair projects
- Install with Outdoor Accents connector screws for decorative look and maximum strength (sold separately)
- ZMAX® galvanization with a black powder coat offers extra corrosion resistance for exterior and treated-wood applications
- The APVA4 is designed for use with 4x or larger lumber
-
$29.95
Features
- PFM1411020 is designed for standard ANSI tolerance drill bits
- Patented thread design offers low installation torque
- Tough threads for tapping high strength concrete
- Ratchet teeth on underside of hex washer head lock against the fixture
- Can be installed closer to the edge than traditional expansion anchors
-
$1.99
Features
- The Avant Collection features straight edges and chamfered corners for a clean, timeless design
- Stronger than angled nailing or screw fastening alone for outdoor living or home repair projects
- Install with Outdoor Accents connector screws for decorative look and maximum strength (sold separately)
-
$0.00
ADD TO CART & CHECK OUT TO REQUEST PRICE QUOTE. Once we receive your request, we will contact you with pricing for this product
-
SALEÂ 11% OFF
$48.19 Original price was: $48.19.$42.88Current price is: $42.88.
Features
- Material: 12 gauge
- APHH610 has a ZMAX galvanized finish with a black powder coat
-
$48.19
APHH heavy hangers connect 4x and 6x beams to girders. These concealed-flange hangers feature straight edges and provide a cleaner-looking installation for joist connections. Available in a range of sizes, the hangers install easily to the joist with the Outdoor Accents® structural wood screw and hex-head washer, and to the header with the Strong-Drive® SDS…
-
$23.49
Features
- Use all specified fasteners; see General Notes
- Use the Outdoor Accents structural wood screw (SDWS22312DBB) and hex-head washer (STN22) to connect to the joist
- Use the Strong-Drive SDS Heavy-Duty Connector screw (SDS25300) to connect to the header
- Fasteners sold separately
-
$12.79
Features
- The Avant Collection features connectors with straight edges and chamfered corners for a clean and timeless contemporary design
- Install with Outdoor Accents structural screws and hex-head washer (sold separately) for a decorative look
-
$44.69
Features
- Use with Outdoor Accents decorative hardware and STN22 hex-head washer for an appealing look
- Use Outdoor Accents structural screw without the washer as a wood-to-wood fastener
- Deep 6-lobe T40 recess provides easy, secure driving (T40 drive bit included in multi-count packages)
- Patented SawTooth® point (3 1/2″ and 5 1/2″ screws only) ensures fast starts, reduces installation torque and eliminates the need for predrilling in most applications; Type-17 point on 2″ screw ensures fast starts
- Black double-barrier coating offers premium look while providing a medium level of corrosion protection for many outdoor applications
-
$46.31
Features:
- Increased uplift resistance for wind or seismic loading
- Bolt hole locations meet code-required spacing for optimal capacity
- Nominal column size: 6×6
- Made from 7-gauge steel
- Galvanized (G90) for extra corrosion resistance
-
$1.85
Features:
- Attaches easily to the concrete form for quick installation
- Lays flat on the form board so there is no anchor bolt to finish around
- No labor costs involved in drilling plates and aligning holes
- Flat design eliminates chances of modification in prefabricated walls
- Eliminates the need to notch studs due the anchor bolts being placed where it will interfere
-
$20.99
Features
- The Avant Collection features connectors with straight edges and chamfered corners for a clean and timeless contemporary design
- Install with Outdoor Accents structural screws and hex-head washer (sold separately) for a decorative look
-
-
$5.53
Features:
- Chamfered top designed to prevent mushrooming during installation
- Qualified for static and seismic loading conditions (seismic design categories A through F)
- Suitable for horizontal, vertical and overhead applications
- Qualified for minimum concrete thickness of 3-1/4 in., and lightweight concrete-over-steel deck thickness of 2-1/2 in. and 3-1/4 in.
- Tested per ACI355.2 and AC193
-
$3.00
Features:
- Replaces additional framing and toe-nailing
- Suitable for most installations on nominal 2×10 or 2×12 header/rim board
- May be installed flush with the top of the carrying member or lower on the face
- Interchangeable for left or right applications
- Made from 18-gauge steel
-
![TW1061T-PC-[Roll]](https://heyden.dreamhosters.com/wp-content/uploads/2021/01/max-tw1061t-pc-poly-coated-tie-wire-1.jpg)
$640.99
Features:
- Poly Coated Wire Resists Rust and Corrosion
- Use with epoxy coated rebar
- 19 Guage Rebar Tie Wire
- For use with MAX RB441T TwinTier and RB401T-E TwinTier
-
$39.46
Features
- PFM1411380 is designed for standard ANSI tolerance drill bits
- Patented thread design offers low installation torque
- Tough threads for tapping high strength concrete
- Ratchet teeth on underside of hex washer head lock against the fixture
- Can be installed closer to the edge than traditional expansion anchors
-
$6.69
Features
- Use with Outdoor Accents decorative hardware (sold separately) for an appealing look
- 1/4″ hex head engages with driver bit for easier installation (1/4″ hex drive bit included)
- Optimized heat treating for ductility and strength
- The single-fastener steel-side-plate allowable load of the SD10 exceeds the shear load of a 0.162″ x 3 1/2″ nail
- Black double-barrier coating provides premium look while providing a medium level of corrosion protection for many outdoor applications
-
SALEÂ 10% OFF
$15.99 Original price was: $15.99.$14.39Current price is: $14.39.
Features
- BCS2-3/6Z BCS opposing flanges provide increased lateral resistance
- Double-shear nailing for optimal strength
- Sized specifically for multi-2x widths
-
$12.79
Features
- ZMAX® galvanization with a black powder coat offers extra corrosion resistance for exterior and treated-wood applications
- Install with Outdoor Accents structural screws and hex-head washer (sold separately) for a decorative look
-
$26.19
Features
- Use with Outdoor Accents decorative hardware and STN22 hex-head washer for an appealing look
- Use Outdoor Accents structural screw without the washer as a wood-to-wood fastener
- Deep 6-lobe T40 recess provides easy, secure driving (T40 drive bit included in multi-count packages)
- Patented SawTooth® point (3 1/2″ and 5 1/2″ screws only) ensures fast starts, reduces installation torque and eliminates the need for predrilling in most applications; Type-17 point on 2″ screw ensures fast starts
- Black double-barrier coating offers premium look while providing a medium level of corrosion protection for many outdoor applications
-
$2.69
Features
- Install with Outdoor Accents structural screws and hex-head washer (sold separately) for a decorative look
-
$24.49
Features
- Designed to meet stringent building codes for seismic or high-wind events
- Slotted for adjustability
- Features 1″ standoff to help prevent rot at post end
- Outdoor Accents side plates available (see APBDSP)
- Fastener holes are slightly offset to help prevent fastener interference
-
$172.60
Features:
- Made of carbon steel wire
- Tangle-free unwinding
- Full case count – 20 rolls
-
$39.90
Features
- PFM1411100 is designed for standard ANSI tolerance drill bits
- Patented thread design offers low installation torque
- Tough threads for tapping high strength concrete
- Ratchet teeth on underside of hex washer head lock against the fixture
- Can be installed closer to the edge than traditional expansion anchors
-
$101.59
Features
- Designed to meet stringent building codes for seismic or high-wind events
- Slotted for adjustability
- Features 1″ standoff to help prevent rot at post end
- Outdoor Accents side plates available (see APVBDSP)
- Fastener holes are slightly offset to help prevent fastener interference
-
SALEÂ 6% OFF
$75.99 Original price was: $75.99.$71.43Current price is: $71.43.
Features:
- Manual dispensing tool
- EDT22S features a steel carriage and is engineered for high-volume, continuous use
- The tool can be easily convert from dispensing a 22 oz. 1:1 ratio cartridge to a 16.5 oz. 2:1 ratio cartridge
- For 22 oz. adhesive cartridges
-
$35.29
Features
- Complements the Outdoor Accents APVB decorative post base
- Designed for use with 4x, 6x, 8x and 10x nominal lumber
- Decorative side plates are sold in boxes of 2
-
SALEÂ 4% OFF
$95.59 Original price was: $95.59.$91.76Current price is: $91.76.
Features
- APVGP1212 is easily installed with Outdoor Accents, structural screws and hex-head washers
- Fasteners sold separately
DeWalt DW5821 Elite Series 1-1/8 in. x 10 in. x 15 in. 4-Cutter SDS Max Rotary Hammer Bit
1 × $70.99 
TSBRKT Marshalltown Threaded Broom/Darby Bracket
1 × $32.71 
Diablo DS0608CF 6" Carbide Reciprocating Blades for Thick Metal Cutting
1 × $9.64 
BFB40 Marshalltown Broom float
1 × $125.57 
DeWalt DW5812 Elite Series 3/4 in. x 16 in. x 21-1/2 in. 4-Cutter SDS Max Rotary Hammer Bit
1 × $41.99 
2' x 4' Lumber 16ft
1 × $0.00 
DeWalt PFC1271050 AC200+ Quickshot Injection Adhesive Anchoring System 9.5 Oz
1 × $29.99 
DeWalt DW5843 10 in. x 1- 3/8 in. Bushing Tool SDS Max Shank
1 × $48.99 
WX618F 6"x18" Finish Blades
1 × $65.00 
GAG10M1 40V max XGT Brushless Cordless 7in/9" Angle Grinder Kit w/ Electric Brake, AWS Capable [4.0Ah]
1 × $642.99 
427HH Marshalltown Broom Concrete
2 × $131.69 
Ice Melter Salt
2 × $20.00 
DeWalt DW5847 3/4-Inch Ground Rod Driver
1 × $67.90 
BFB48 Marshalltown Broom Float
1 × $120.02 
[30 Rolls] TW1061T | MAX TwinTier 19Ga Steel Rebar Tie Wire - Full Case
1 × $289.88 
