“[20 Pack] Simpson Strong-Tie THD50600HMG Titen HD 1/2 in. x 6 in. Mechanically Galvanized Heavy-Duty Screw Anchor” has been added to your cart.
View cart
Showing 361–400 of 455 resultsSorted by popularity
$ 114.28Features
Tested in accordance with ACI 355.2, AC193 and AC106
Qualified for static, wind and seismic loading conditions
Thread design undercuts to efficiently transfer the load to the base material
Standard fractional sizes
Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
6-lobe drive reduces driver-bit cam-outs, resulting in easier installation
Countersunk head allows screw anchor applications incompatible with a hex head
Available in 1/4″ and 3/8″ diameters
$ 97.23Features
Tested in accordance with ACI 355.2, AC193 and AC106
Qualified for static, wind and seismic loading conditions
Thread design undercuts to efficiently transfer the load to the base material
Standard fractional sizes
Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
Reuse of the anchor will not achieve listed loads and is not recommended
$ 188.31Features
Tested in accordance with ACI 355.2, AC193 and AC106
Qualified for static, wind and seismic loading conditions
Thread design undercuts to efficiently transfer the load to the base material
Standard fractional sizes
Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
Reuse of the anchor will not achieve listed loads and is not recommended
$ 48.86Features
Tested in accordance with ACI 355.2, AC193 and AC106
Qualified for static, wind and seismic loading conditions
Standard fractional sizes, hole size same as anchor size
No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
Removable — ideal for temporary anchoring or applications where fixtures may need to be moved
6-lobe drive reduces driver-bit cam-outs, resulting in easier installation
Countersunk head allows screw anchor applications incompatible with a hex head
Available in 1/4″ and 3/8″ diameters
$ 68.15Features
Tested in accordance with ACI 355.2, AC193 and AC106
Qualified for static, wind and seismic loading conditions
Thread design undercuts to efficiently transfer the load to the base material
Standard fractional sizes
Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
Reuse of the anchor will not achieve listed loads and is not recommended
$ 288.62Features
THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
Ideal for exterior or corrosive environments
Less carbon steel, less expansion
Installs with an impact wrench or by hand tool
Tested in accordance with ACI355.2, AC193 and AC106
$ 73.54Features
Tested in accordance with ACI 355.2, AC193 and AC106
Qualified for static, wind and seismic loading conditions
Thread design undercuts to efficiently transfer the load to the base material
Standard fractional sizes
Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
Reuse of the anchor will not achieve listed loads and is not recommended
$ 62.46Features
Tested in accordance with ACI 355.2, AC193 and AC106
Qualified for static, wind and seismic loading conditions
Thread design undercuts to efficiently transfer the load to the base material
Standard fractional sizes
Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
Reuse of the anchor will not achieve listed loads and is not recommended
$ 39.00Features
Tested in accordance with ACI 355.2, AC193 and AC106
Qualified for static, wind and seismic loading conditions
Thread design undercuts to efficiently transfer the load to the base material
Standard fractional sizes
Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
Reuse of the anchor will not achieve listed loads and is not recommended
$ 72.15Features
Tested in accordance with ACI 355.2, AC193 and AC106
Qualified for static, wind and seismic loading conditions
Thread design undercuts to efficiently transfer the load to the base material
Standard fractional sizes
Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
Reuse of the anchor will not achieve listed loads and is not recommended
$ 155.69Features
THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
Ideal for exterior or corrosive environments
Less carbon steel, less expansion
Installs with an impact wrench or by hand tool
Tested in accordance with ACI355.2, AC193 and AC106
$ 244.62Features
THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
Ideal for exterior or corrosive environments
Less carbon steel, less expansion
Installs with an impact wrench or by hand tool
Tested in accordance with ACI355.2, AC193 and AC106
$ 266.92Features
THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
Ideal for exterior or corrosive environments
Less carbon steel, less expansion
Installs with an impact wrench or by hand tool
Tested in accordance with ACI355.2, AC193 and AC106
$ 1.45Features
Cannot be modified
Works for a wide range of applications
Features speed prongs used to temporarily position and secure the connector for easier and faster installation
LUS-series hangers are tested, load rated and code compliant
$ 2.74Features
Forms part of a continuous load path to resist wind and seismic forces
The H10A-2 model holds a double-ply member and is approved for installation with the Strong-Drive® SD Connector screw
The H10AR model is designed for rough lumber sizes
$ 1.19Features
Cannot be modified
Works for a wide range of applications
Features speed prongs used to temporarily position and secure the connector for easier and faster installation
LUS-series hangers are tested, load rated and code compliant
SALE 16% OFF
$ 161.69Original price was: $161.69. $ 135.36Current price is: $135.36. Features
Certified welds for confidence in strength and loading
CC7 1/8-6 uplift loads increased for earthquake or wind loading
Bolt spacing that meets NDS code requirements
Diamond holes to provide temporary fastening
$ 139.08Features:
Can be used where quick-to-install posts are needed, including fencing and mailbox applications
Black powder-coated steel construction for reliable strength and decorative finish
Approved for installation with the Strong-Drive SDS Connector screw
$ 24.99Features
Allows easy installation of 4×4 wood posts on existing concrete
Black powder-coated steel construction for reliable strength and decorative finish
Approved for installation with the Strong-Drive® SDS Connector screw
$ 15.99Features
FPBM44E allows easy repair of rotted or damaged wood posts installed in concrete or dirt
Black powder-coated steel construction for reliable strength and decorative finish
Approved for installation with the Strong-Drive® SD Connector screw
Reinforces weakened wood posts without having to replace the post or the concrete
$ 40.37Features
Excellent for use in cold weather conditions or applications where fast cure is required.
superior sustained load performance at elevated temperature.
can be specified for dry and damp conditions when in-service temperatures range from -40°F (-40°C) to 180°F (82°C).
Approved for installation with vacuum-drill bit system without further hole cleaning.
Passed the demanding ICC-ES AC308 adverse-condition tests pertaining to reduced and elevated temperatures and long-term sustained loads.
Easy hole-cleaning procedure — no power-brushing required.
$ 121.41Features
superior bond strengths permit ductile solutions in high seismic areas.
improved sustained load performance at elevated temperature.
can be specified for all base material conditions when in-service temperatures range from -40°F (-40°C) to 176°F (80°C).
Recognized per ICC ES AC308
Approved for installation with multiple vacuum-drill bit systems without further hole cleaning.
Wire brush hole-cleaning system for conventional blow-brush-blow cleaning method for anchoring.
With higher bond strengths, ductile solutions can often be achieved with SET-3G in high seismic areas.
Low-odor formulation.
no performance difference between water-saturated concrete, water-filled holes, or submerged concrete.
For use with potable water.
$ 111.29This item has been DISCONTINUED.
$ 132.72Features:
Redesigned tip and thread pattern provides easy starts and up to 25% less torque while driving makes for up to 20% faster driving
Less installation torque also means less wear on tools
Deep 6-lobed recessed ribbed head provides clean countersinking and more secure bit retention for fewer cam-outs
The holding power of WSV screws reduces the gaps between the joist and subfloor that cause floor squeaks
WSV screws can be easily backed out, allowing for future access to floor cavities
$ 13.95Features:
Provides a positive connection for a post to a wood deck
Stronger than angled nailing or screw fastening
Reduces the chance of the post splitting and eliminates nailing into end grain
Not recommended for non top-supported installations (such as fences or unbraced carports)
Nominal post size: 4×6
$ 4.20Features:
A versatile, heavy-duty strap for a variety of connections and splices where extra strength is needed
Straight lines and chamfered edges offer a better appearance
Provides support in home repair and construction projects
Easy nailing pattern for connecting the sides of 2x members
Width: 1-3/8 in.
$ 13.41Features:
SUL = skewed left
Features obround nail holes on the acute side, allowing nails to be easily installed parallel to the joist
These hangers cannot be modified but will accommodate a 40 degree to 50 degree skewed joist
Available with the acute flange turned in to accommodate end-of-wall installation for solid sawn sizes only (SURC or SULC)
Nominal joist size: 2×6 or 2×8
SALE 4% OFF
$ 308.77Original price was: $308.77. $ 296.41Current price is: $296.41. Features:
Flat head
SSDWP3S305 has a unique box thread design with raised-ridge technology greatly reduces driving torque
Specially designed sharp point penetrates hard wood products with ease
6-lobe drive helps prevent driver-bit cam-out while driving easier and extending bit life (replacement bit BITTX25)
Length: 3 in.
$ 2.39Features:
Anchors mudsill to concrete block, poured walls or slab foundations
Fill CMU cell with concrete grout first, then place MASB into the grouted cell and adjust into position
Attach mudsill to anchor only after the concrete grout cures
Nominal sill size: 2×4, 2×6
Made from 16-gauge steel
$ 32.01Features:
Ideal for retrofit or new construction projects
Can be installed with cast-in-place or post-installed anchor bolts
Four-ply formed steel provides increased tension capacity
Anchor bolt washers not required
2-1/2 in. width x 16 in. length
$ 1.89Features:
Patented double-shear nailing design provides greater strength with fewer nails
Speed prongs for fast and easy installation
Angled joist nailing easier in tight spaces
Do not bend or remove tabs
Nominal joist size: 2×8 and 2×10
$ 17.17Features:
The minimum effective shank length must equal or exceed the sum of the thickness of the attached material and the minimum embedment depth
Code listed per ICC-ES ESR-2138, Florida FL15730 and LA RR25469
Compatible with Simpson Strong-Tie powder-actuated tool systems as well as other common tools
.300-in. head diameter / .157-in. shank diameter
1-in. washer
$ 3.03Features:
LUC-series hangers are tested, load rated and code compliant
The LUC series installs using several fastener selections with tested allowable loads
Suitable for nominal 2×10 and 2×12 lumber
Made from 18-gauge steel
ZMAX galvanization offers extra corrosion resistance for exterior and treated-wood applications
$ 189.99Features:
Redesigned tip and thread pattern provides easy starts and up to 25% less torque while driving makes for up to 20% faster driving
Less installation torque also means less wear on tools
Deep 6-lobed recessed ribbed head provides clean countersinking and more secure bit retention for fewer cam-outs
The holding power of WSV screws reduces the gaps between the joist and subfloor that cause floor squeaks
WSV screws can be easily backed out, allowing for future access to floor cavities
$ 4.09Features:
One-piece, wrap-around clip ensures uniform holding capacity
Threaded end is chamfered for ease of starting nut
Diameter: 5/8 in.
Length: 6 in.
Made from mechanically galvanized carbon steel
$ 1.35Features:
Load-rated, precut strap designed for quick installation and optimal performance
Designed to resist wind and seismic forces
Floor-to-floor clear span application
Width: 1-1/4 in.
Length: 18 in.
$ 77.26Features:
SDS screws are supplied with the holdowns to ensure proper fasteners are used
No stud bolts to countersink at openings
Height: 14 in.
Made from 7-gauge steel
Galvanized (G90) for extra corrosion resistance
$ 1.99Features:
Holds the rafter or truss on both sides for high lateral load resistance
Used for a variety of connections where one member crosses another
Can be installed on inside or outside of wall, or both sides
Can be installed with flanges facing either inward or outward
Made from 18-gauge steel
$ 2.29Features:
An indented embedment line ensures accurate embedment depth
Compatible with the Simpson Strong-Tie preassembled TSS snap-in seat
Load rated for wind and seismic forces
12-in. exposed length
Embed 4 in. into a poured concrete bond beam or grouted block wall
$ 13.49Features:
Suitable for retrofit applications
The embossments add stiffness in crucial areas for improved performance
Simple to install and can be installed on the inside or outside of the wall
Load rated to resist high-wind forces
2-ply
![[20 Pack] Simpson Strong-Tie THD50600HMG Titen HD 1/2 in. x 6 in. Mechanically Galvanized Heavy-Duty Screw Anchor](https://heyden.dreamhosters.com/wp-content/uploads/2022/12/A_THD50600HMG_ProdPho_Pho_Prod_TitenHD-Galvanized_C0-600x600.jpg)
[20 Pack] Simpson Strong-Tie THD50600HMG Titen HD 1/2 in. x 6 in. Mechanically Galvanized Heavy-Duty Screw Anchor 
![[50 Pack] Simpson Strong-Tie THD37500CS Titen HD 3/8 in. x 5 in. Zinc-Plated Countersunk Head Heavy-Duty Screw Anchor](https://heyden.dreamhosters.com/wp-content/uploads/2022/12/b3d40e526ae041ff4ca2b4995a048052d426f671-1-600x600.jpg)
![[20 Pack] Simpson Strong-Tie THD50800HMG Titen HD 1/2 in. x 8 in. Mechanically Galvanized Heavy-Duty Screw Anchor](https://heyden.dreamhosters.com/wp-content/uploads/2022/12/THD37300H1500_300-3-600x600.jpg)
![[50 Pack] Simpson Strong-Tie THDB25234CS Titen HD 1/4 in. x 2-3/4 in. Zinc-Plated Countersunk Head Heavy-Duty Screw Anchor](https://heyden.dreamhosters.com/wp-content/uploads/2022/12/b3d40e526ae041ff4ca2b4995a048052d426f671-600x600.jpg)
![[5 Pack] Simpson Strong-Tie THD75100H Titen HD 3/4 in. x 10 in. Heavy-Duty Screw Anchor](https://heyden.dreamhosters.com/wp-content/uploads/2022/12/THD37300H1500_300-2-600x600.jpg)
![[20 Pack] Simpson Strong-Tie THD50800H6SS Titen HD 1/2 in. x 8 in. Type 316 Stainless-Steel Heavy-Duty Screw Anchor](https://heyden.dreamhosters.com/wp-content/uploads/2022/12/fe7beccebff488653396b015a2d93bdb19169a58-600x600.jpg)
![[5 Pack] Simpson Strong-Tie THD75812HMG Titen HD 3/4 in. x 8-1/2 in. Mechanically Galvanized Heavy-Duty Screw Anchor](https://heyden.dreamhosters.com/wp-content/uploads/2022/12/A_THD62600H_ProdPho_Pho_Prod_TitenHD-Zinc_C0-1-600x600.jpg)
![[5 Pack] Simpson Strong-Tie THD501200H Titen HD 1/2 in. x 12 in. Heavy-Duty Screw Anchor](https://heyden.dreamhosters.com/wp-content/uploads/2022/12/THD37300H1500_300-600x600.jpg)
![[50 Pack] Simpson Strong-Tie THDB25234H Titen HD 1/4 in. x 2-3/4 in. Heavy-Duty Screw Anchor](https://heyden.dreamhosters.com/wp-content/uploads/2022/12/A_THDB25312H_ProdPho_Pho_Prod_C0-600x600.jpg)
![[10 Pack] Simpson Strong-Tie THDB62500HMG Titen HD 5/8 in. x 5 in. Mechanically Galvanized Heavy-Duty Screw Anchor](https://heyden.dreamhosters.com/wp-content/uploads/2022/12/A_THDB62612HMG_ProdPho_Pho_Prod_C0-600x600.jpg)
