“GAG13M1 40V max XGT Brushless Cordless 4‑1/2″ / 5″ X‑LOCK Paddle Switch Angle Grinder Kit, with Electric Brake [4.0Ah]” has been added to your cart. View cart
Showing 161–200 of 318 resultsSorted by popularity
Driver-Drill weighs only 3.1 lbs. with battery for reduced operator fatigue
Compact and ergonomic design at only 6-1/2″ long
Mechanical variable 2-speed transmission (0-500 & 0-1,700 RPM) (0-7,500 & 0-25,500 BPM) for a wide range of drilling, fastening and hammer drilling applications
Makita-built Brushless Motor delivers 350 in.lbs. of Peak Torque
Engineered with a metal jampot design for increased durability
Makita-built brushless motor along with 40V max XGT® battery combine to deliver powerful grinding and up to 60% faster cutting speed than predecessor models*
X-LOCK quick change system allows for tool-free wheel changes with an easy snap-on mounting and fast change-outs by simply pulling a release lever
Electronic current limiter helps protect the motor from overload in high torque application
Electric brake stops the grinding or cut-off wheel in 2 seconds or less for maximum productivity
Active Feedback-sensing Technology (AFT®) turns the motor off if rotation of the wheel is suddenly forced to stop
RAPID DRILLING AND CHIPPING in hard concrete with 13.3 J of impact energy
MAINTAIN SPEED UNDER HEAVY LOADS with constant speed electronics
EFFICIENT PERFORMANCE AND RUNTIME with brushless motor and German-engineered mechanism
PRO-GRADE VERSATILITY: Tackle horizontal and downward drilling for #6 – #9 rebar dowel applications, dry coring up to 5 in., chipping in any lower-to-mid wall, bushing, and ground rod driving
REDUCED VIBRATION FOR COMFORTABLE GRIP with SHOCKS™ Active Vibration Control®
Makita-built motor delivers up to 15,500 VPM to help increase strength of concrete
Two-power mode selection (normal/power) allows the use of the tool for a wide range of job site applications: Concrete compaction of floors, pillars, and mat foundations
Up to 45 minutes of run time in power mode and 60 minutes of run time in normal mode
Compact and ergonomic design at only 77″ long
Weighs only 10.6 lbs. with battery for reduced operator fatigue
Makita-built motor delivers up to 15,500 VPM to help increase strength of concrete
Two-power mode selection (normal/power) allows the use of the tool for a wide range of job site applications: Concrete compaction of floors, pillars, and mat foundations
Up to 45 minutes of run time in power mode and 60 minutes of run time in normal mode (battery not included)
Compact and ergonomic design at only 77″ long
Weighs only 10.6 lbs. with battery for reduced operator fatigue (battery not included)
Makita-built motor delivers up to 15,500 VPM to help increase strength of concrete
Two-power mode selection (normal/power) allows the use of the tool for a wide range of job site applications: Concrete compaction of floors, pillars, and mat foundations
Up to 45 minutes of run time in power mode and 60 minutes of run time in normal mode (battery not included)
Compact and ergonomic design at only 99″ long
Weighs only 17.2 lbs. with battery for reduced operator fatigue (battery not included)
Variable 2-speed Hammer Driver-Drill with Makita-built brushless motor delivers (0-650 & 0-2,600 RPM) (0-9,750 & 0-39,000 BPM) and 1,250 in.lbs. of Max Torque
Electronic digital clutch accurately targets desired torque range (41 settings in low speed, 21 settings in high speed)
Active Feedback-sensing Technology (AFT®) turns the motor off if rotation of the accessory is suddenly forced to stop
Impact Driver features 4-speed power selection (0-1,100/ 0-2,100/ 0-3,200/ 0-3,700 RPM & 0-1,400/ 0-2,600/ 0-3,600/ 0-4,100 IPM) provides 1,860 in.lbs. of Max Torque
Tightening Mode (T-mode) for faster tightening of self-drilling screws in thick or thin gauge metal
Gas-free operation eliminates the need for fuel cells and provides a consistent, powerful alternative that operates on the DEWALT 20V MAX battery platform
Variable power settings allow for pin depth adjustment and substrate versatility
Field-serviceable driver blade reduces downtime of tool
Comparable application speed to gas concrete nailers
Dual LED worklights help illuminate work surface and provide onboard diagnostics
Makita built brushless motor with two speed, variable speed (0-400 RPM and 0-1,500 RPM) for maximum efficiency and a wide range of drilling applications
Drills up to 6-1/4″ holes with hole saws and 4-5/8″ holes with self feed bits
Weighs only 11.9 lbs. with battery and ergonomic design for operator comfort
Torque limiter; built-in clutch reduces gear damage by disengaging gears if the bit binds
Built-in L.E.D light with pre-glow and afterglow illuminates the work area
Fast Drilling in Concrete With 2.1 joules of impact energy
OSHA Table 1 Compliant when paired with DWH303DH on-board extractor
Shocks Active Vibration Control System reduces vibration felt by the user at the handles, compared to rotary hammers without this feature
mechanism and brushless motor for efficient performance and runtime.
Lightweight Design makes this tool ideal for rod hanging, seismic & safety attachments, cable tray & strut mounting, clamp mounting, and rail mounting.
Provides spark-free cuts that are clean and burr-free for easy hand-threading of fastener or nut
Up to 1,300 cuts of 3/8” mild steel threaded rod and 1,200 cuts of 3/8” stainless steel threaded rod with one 18V LXT 5.0Ah battery (battery not included)
Ideal for overhead cutting of installed threaded rod including 1/4″ and 3/8″ coarse thread diameter sizes
Ergonomically designed handle provides a more comfortable hand position for increased comfort and less fatigue
Compact design at only 7-7/8″ long and weighs only 7 lbs. with battery (battery not included)
GAG13M1 40V max XGT Brushless Cordless 4‑1/2" / 5" X‑LOCK Paddle Switch Angle Grinder Kit, with Electric Brake [4.0Ah] 
