“[Pack of 100] DeWalt PFM1411060 1/4″ x 2-1/4″ Screw-Bolt+ Concrete Screw Anchor, Hex Washer Head, Zinc” has been added to your cart.
View cart
Showing 1–40 of 336 resultsSorted by popularity
SALE 14% OFF
$ 12.90Original price was: $12.90. $ 11.05Current price is: $11.05. Features
Every other tooth is ground thinner for fast cuts
Thicker plate design for improved tracking
Reinforced shoulder for durability and impact resistance
Body slots dissipate heat for long blade life
Minimum order quantity: 10
Order in multiples of: 10
$ 10.29Features
DFM12722 is available in several head styles
$ 299.99Features
Brushless motor delivers up to 75% more runtime vs. 18v NiCad brushed motors
XR Li-Ion batteries with fuel gauge provide 33% more capacity over standard packs
1/2-in ratcheting nitro-carburized metal chuck with carbide inserts
3-Mode LED up to 20X brighter than previous model
LED spotlight mode features 20 minute shutoff function allowing for extended work time
3-speed all-metal high performance transmission
0-450/0-1300/0-2000 RPM in drill mode
0-500/0-1500/0-2250 RPM in hammer drill mode
$ 29.95Features
PFM1411020 is designed for standard ANSI tolerance drill bits
Patented thread design offers low installation torque
Tough threads for tapping high strength concrete
Ratchet teeth on underside of hex washer head lock against the fixture
Can be installed closer to the edge than traditional expansion anchors
$ 97.99Features
Promote ease-of-use with the step-to-lift function enabled by the reinforced-handle
Complete a wide range of applications with a lift capacity of up to 340 lbs.* and a lift height of 8-3/4 in
Lower with control and make fine-tune adjustments when leveling with the precision controlled lowering tab
Get underneath applications quickly with a slim, tapered base.
Help maximize comfort during strenuous tasks with the DWHT83550 featuring an over molded handle, and reinforced metal ribs that provide additional support for tough loads.
$ 215.99Features
Complete a wide variety of applications with up to 1,500 in-lbs of torque
Bright LED with 20 second trigger delay for working in dark or confined spaces
Variable speed trigger allows for control and precision on delicate work surfaces
Easily change bits with quick release hex chuck
$ 39.46Features
PFM1411380 is designed for standard ANSI tolerance drill bits
Patented thread design offers low installation torque
Tough threads for tapping high strength concrete
Ratchet teeth on underside of hex washer head lock against the fixture
Can be installed closer to the edge than traditional expansion anchors
$ 39.90Features
PFM1411100 is designed for standard ANSI tolerance drill bits
Patented thread design offers low installation torque
Tough threads for tapping high strength concrete
Ratchet teeth on underside of hex washer head lock against the fixture
Can be installed closer to the edge than traditional expansion anchors
SALE 4% OFF
$ 317.99Original price was: $317.99. $ 305.27Current price is: $305.27. Features
77% more power when paired with FLEXVOLT batteries
delivers 5,500 RPM for faster cutting
Maximum depth of cut of 2-9/16 in. at a 90°
Maximum depth of cut of 2 in. at a 45°
Electric brake
$ 949.99Features
DCLE34035D1 features 9 hours of runtime per charge
Remote-controlled operation
Up to 260 ft. visible range
Quick-head adjustment
Drop alert detection
$ 359.99Features
Dewalt DCS578X2 features Up to 47% more power vs the DCS575**
Uses a 7-1/4 in. circular saw blade and features a maximum cut depth of 2-9/16 in. at a 90° bevel.
Maximum bevel capacity of 57° with bevel stops at 22.5° and 45°
Electric brake stops the blade after the trigger is released
Integrated LED for increased visibility and cut accuracy
Integrated rafter hook for quick and easy storage
$ 12.99Features
DFM12724 is available in several head styles
Several colors and finishes to match application
Removable (reusable in wood)
High-low thread design for greater stability and grip
Does not exert expansion forces
$ 1,146.99Features
The Dewalt DCS692X2 prevents accidental activation with a 2-stage trigger switch
Connect to other compatible tools and operate cord-free with WIRELESS TOOL CONTROL
Real-time power and runtime feedback to help you manage your output with an integrated heavy-load indicator light
3-1/4 in. cut depth for single pass in pavestones, rebar cutting, and concrete scoring
$ 617.99Features
3.0 joules of impact energy provides corded power without the cord.
Optimized ergonomic design provides excellent control in all orientations
Durable three mode German engineered mechanism
Wide optimal drilling range between 1/4 in. and 3/4 in.
Factory-set clutch reduces sudden, high-torque reactions if bit jams.
Optimized ergonomic design provides an exceptional drilling and chipping experience in overhead, horizontal and downward orientations.
Constant speed under load for fast speed of application
$ 39.99Features
Rock carbide tip for longer bit life
Elongated four flute helix for faster material removal
Increased steel prevents breakage
For use with electric or cordless rotary hammers
$ 468.99Features
Exposed nail tip places fastener point directly into connector holes for a fast and precise application
In-line magazine offers balance for maneuverability
Adjustable rafter hook allows user to hang tool on rafters and joists
Exclusive nail management feature helps to prevent jamming (patent pending)
Drives 1-1/2″ and 2-1/2″ STRAPSHOT™ fasteners as well as other paper tape collated metal connector nails
SALE 19% OFF
$ 2,091.99Original price was: $2,091.99. $ 1,699.00Current price is: $1,699.00.
SALE 12% OFF
$ 241.99Original price was: $241.99. $ 212.95Current price is: $212.95. Features
Reduce noise disturbances with up to 57% quieter operation.
Industry’s highest rated max torque hydraulic impact driver
DCF870B provides up to 40% faster driving – drive large screws quickly and finish jobs fast
Provides consistent performance in demanding applications and performs in cold temperatures
Complete framing, cabinetry, and other applications in tight areas with an ergonomic design
DCF870B Manual
$ 299.99Features
Stall release lever to reset driver blade in the event of a jam
Adjustable rafter hook
Easy access to the nosepiece for removal of jammed nails
Dry fire lock out prevents tool from firing when nails are low
33° magazine holds up to 55 paper collated nails
$ 399.00Features
DeWalt DCK4050M2 Combo Kit
DCD805: 40% more power versus the DCD796B using DCB205 battery or DCBP034 DEWALT POWERSTACK battery (sold separately)
DCF850: Brushless motor that delivers up to 1,825 in-lb of torque and 3,250 rpm for driving large-diameter screws
DCS356: The DUAL-GRIP variable-speed trigger and 3-speed selector provide ultimate speed and application control, and the bright LED illuminates dark workspaces.
DCS382: FAST CUTS: Rapidly saw through various materials with 1-1/8 in. stroke length
$ 131.73Features
DISCONTINUED, REPLACED with DCE512B
Wide-range, variable speed control
Multiple hanging options, free-standing, hang hooks, tripod-mount and wall-mount
$ 947.15Features
DISCONTINUED – SEE DCS692X2 FOR UPDATED MODEL
Cuts up to 25.5 ft. of 1 in. scoring in cure concrete per charge
3-1/4 in. depth of cut for single pass in pavestones, rebar cutting, and concrete scoring
Heavy-load indicator light provides power and runtime feedback during demanding applications
5-position rotatable guard for approach angle selection, allowing for optimal visibility and accessibility when cutting in tight spaces
Dual-sided water feed system offers an OSHA Table 1 Compliant solution for dust management when cutting concrete
$ 605.99Features
13 Amp motor
9000 rpm no-load speed for applications with 6 in. grinder wheels
Brake engages when trigger is released with stopping speeds of 1.5 seconds when using a standard grinding wheel (4-1/2 in. x 1/4 in. bonded abrasive wheel, non-hubbed)
Kickback Brake engages when a pinch, stall, or bind-up event is sensed and the electronic brake engages with maximum force to quickly stop the wheel, reduce the movement of the grinder, and shut the grinder off
E-CLUTCH® activates in less than a tenth of a second when a pinch/stall is detected, shutting down the motor
Up to 30% more power vs the DCG414 Grinder
$ 28.95Features
PFM1411060 is designed for standard ANSI tolerance drill bits
Patented thread design offers low installation torque
Tough threads for tapping high strength concrete
Ratchet teeth on underside of hex washer head lock against the fixture
Can be installed closer to the edge than traditional expansion anchors
$ 245.72Features
4 Amp Hour (80 Watt hour) capacity provides extended runtime
Same size & weight as DCB230 20V MAX* compact 3Ah battery
Lighter weight with same capacity as DCB204 4Ah battery
compatible with 20V MAX* tools and chargers
Includes fuel gauge 3-LED charge indicator
$ 347.99Features
Simultaneous Charger: All Ports Charge At The Same Time
Charges 12V MAX*, 20V MAX*, and FLEXVOLT® 20V/60V MAX* Batteries
8 Amps Output Per Port (simultaneously)
Charges (4) DCB204 battery in 40 mins
Side Brackets To Mount Onto The ToughSystem™ Rails
SALE 24% OFF
$ 160.99Original price was: $160.99. $ 121.97Current price is: $121.97. Features
IP 54 Rated
Powerful Upgraded Motor to Provide Up To 650 CFM
Multiple hanging options – freestanding, hang hooks, and wall mount
Wide-Range, Variable Speed Control
Up to 4.5 Hours runtime on MAX airspeed (using a DEWALT 5.0Ah Battery)
SALE 13% OFF
$ 2,427.99Original price was: $2,427.99. $ 2,123.99Current price is: $2,123.99. Features
DCE210D2 has a compact inline design for efficient one-handed jaw actuation
Press up to 2″ Copper, Stainless-Steel, and Carbon Steel (Black Iron Pipe) press fittings
180° rotaing head to obtain optimal press angle
Bright LED illumination of entire press location
Compatible with Tool Connect software
DeWalt DCE214K 1/4″ to 7/8″ Compact NIBCO Press ACR Press Jaw Kit
SALE 9% OFF
$ 170.99Original price was: $170.99. $ 155.99Current price is: $155.99. Features
13 degree offset box end for knuckle clearance
Increased range of arc swing in tight spaces
DWMT19234 features DirectTorque Technology
Full Lifetime Warranty
SALE 6% OFF
$ 146.99Original price was: $146.99. $ 138.17Current price is: $138.17. Features
Promote productivity with this attachment that delivers 6X faster clamps without the hassle of a hand tool
Limit fatigue with this PEX pincher that requires less work to finish the job
Attach in seconds to go from driving screws to clamping pipe
Works with select DEWALT 20V MAX* and other pro-grade 18V impact drivers
DWAPXPIR Instruction Manual
$ 388.99Features
Bright Led Control Screen
lift-load capacity of up to 265 lbs. MAX
Versatile Performance
Built-In Pressure Sensor
Audio Alarm
$ 24.49Features
Consistent performance in high and low strength concrete
Nominal drill bit size is the same as the anchor diameter
Anchor can be installed through standard fixture holes
Length ID code and identifying marking stamped on head of each anchor
Anchor design allows for follow-up expansion after setting under tensile loading
$ 14.99Features
DFM12726 is available in several head styles
Several colors and finishes to match application
Removable (reusable in wood)
High-low thread design for greater stability and grip
Does not exert expansion forces
$ 448.99Features
The Dewalt DCF403D1 features a brushless motor delivers up to 2,100 lb of pulling force for fastening rivets, including those made of stainless steel
800 RIVETS PER CHARGE** to maximize productivity on the jobsite
DESIGNED FOR EASE OF USE with tool-free nose change and on-board nose piece storage
COMPATIBLE WITH MUTIPLE SIZE RIVETS including 3/32″, 1/8″, 5/32″, and 3/16″ rivets
CAPABLE OF PULLING aluminum, steel, and stainless steel blind rivets
$ 1,327.06Features
19.4 Joules of impact energy for fast drilling and chipping, even in the hardest concrete.
Anti-Rotation E-CLUTCH System shuts down the tool in bind up situations.
Constant speed electronics allows the tool to maintain speed under load
The SHOCKS Active Vibration Control System reduces vibration felt by the user at the handles, compared to rotary hammers without this feature.
The heavy weight design makes it ideally suited for horizontal and downward drilling for #9 – #14 rebar dowel applications and dry coring up to 6 in.
$ 1,008.99Features
6.1 Joules of impact energy for fast drilling and chipping, even in the hardest concrete.
Anti-Rotation E-CLUTCH ® System shuts down the tool in bind up situations.
Constant speed electronics allows the tool to maintain speed under load.
System reduces vibration felt by the user at the handles, compared to rotary hammers without thsis feature.
The light weight design makes it ideally suited for horizontal drilling for #3 – #6 rebar dowel applications and dry coring up to 3 in.
$ 1,516.99Features
Dewalt DCH775X2 offers rapid drilling and chipping in hard concrete with 19.4 J of impact energy
Maintain speed under heavy loads with constant speed electronics
Efficient performance and runtime with brushless motor and German-engineered apparatus
Pro-grade versatility: Tackle horizontal and downward drilling for #9 – #14 rebar dowel applications, dry coring up to 6 in., chipping in any lower wall and floor, bushing, and ground rod driving
Reduced vibration for comfortable grip Active Vibration Control
SALE 4% OFF
$ 164.99Original price was: $164.99. $ 158.39Current price is: $158.39. Features
DCC020IB features three power sources for on the go [20V MAX battery, 12V DC, or 110V AC]
Convenient onboard accessory storage
Heavy-duty rubber feet help reduce walking when in use
Threaded chuck for secure connection to inflation valve
High-pressure inflation mode with automatic shutoff
DCCO20IB Instruction Manual
$ 288.61
This item has been DISCONTINUED. – SEE DCS367P1 FOR UPDATED MODEL
[Pack of 100] DeWalt PFM1411060 1/4" x 2-1/4" Screw-Bolt+ Concrete Screw Anchor, Hex Washer Head, Zinc 
