• [20 Pack] Simpson Strong-Tie THD50800H Titen HD 1/2 in. x 8 in. Heavy-Duty Screw Anchor

    [20 Pack] Simpson Strong-Tie THD50800H Titen HD 1/2 in. x 8 in. Heavy-Duty Screw Anchor

    $92.31

    Features

    • Tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Thread design undercuts to efficiently transfer the load to the base material
    • Standard fractional sizes
    • Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
    • No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
    • Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
    • Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartDone
  • [15 Pack] Simpson Strong-Tie THD50800WH Titen HD 1/2 in. x 8 in. Washer-Head Heavy-Duty Screw Anchor

    [15 Pack] Simpson Strong-Tie THD50800WH Titen HD 1/2 in. x 8 in. Washer-Head Heavy-Duty Screw Anchor

    $87.26

    Features

    • Tested in accordance with ACI 355.2 and AC193
    • Qualified for static, wind and seismic loading conditions
    • Available in 1/2″ and 5/8″ diameters
    • Standard fractional sizes — the hole size matches the anchor size
    • No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
    • For added convenience, a 1/2″ socket adapter and (2) T-drive bits are included in each box
    • Removable — ideal for temporary anchoring or applications where fixtures may need to be moved
    • Washer head allows screw anchor applications incompatible with a hex head
    Add To CartDone
  • [10 Pack] Simpson Strong-Tie THDB62800H4SS Titen HD 5/8 in. x 8 in. Type 304 Stainless Steel Heavy-Duty Screw Anchor

    [10 Pack] Simpson Strong-Tie THDB62800H4SS Titen HD 5/8 in. x 8 in. Type 304 Stainless Steel Heavy-Duty Screw Anchor

    $151.23

    Features

    • THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
    • Ideal for exterior or corrosive environments
    • Less carbon steel, less expansion
    • Installs with an impact wrench or by hand tool
    • Tested in accordance with ACI355.2, AC193 and AC106
    Add To CartDone
  • THD37600H

    [10 Pack] Simpson Strong-Tie THDB62800H Titen HD 5/8 in. x 8 in. Heavy-Duty Screw Anchor

    $63.19

    Features

    • Tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Thread design undercuts to efficiently transfer the load to the base material
    • Standard fractional sizes
    • Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
    • No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
    • Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
    • Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartDone
  • [10 Pack] Simpson Strong-Tie THDB62800WH Titen HD 5/8 in. x 8 in. Washer-Head Heavy-Duty Screw Anchor

    [10 Pack] Simpson Strong-Tie THDB62800WH Titen HD 5/8 in. x 8 in. Washer-Head Heavy-Duty Screw Anchor

    $83.08

    Features

    • Tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Standard fractional sizes, hole size same as anchor size
    • No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
    • Removable — ideal for temporary anchoring or applications where fixtures may need to be moved
    • 6-lobe drive reduces driver-bit cam-outs, resulting in easier installation
    • Countersunk head allows screw anchor applications incompatible with a hex head
    • Available in 1/4″ and 3/8″ diameters
    Add To CartDone
  • THD37300CS6SS

    [10 Pack] Simpson Strong-Tie THDB62800H6SS Titen HD 5/8 in. x 8 in. Type 316 Stainless Steel Heavy-Duty Screw Anchor

    $177.69

    Features

    • THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
    • Ideal for exterior or corrosive environments
    • Less carbon steel, less expansion
    • Installs with an impact wrench or by hand tool
    • Tested in accordance with ACI355.2, AC193 and AC106
    Add To CartDone
  • [10 Pack] Simpson Strong-Tie THDB62800HMG Titen HD 5/8 in. x 8 in. Mechanically Galvanized Heavy-Duty Screw Anchor

    [10 Pack] Simpson Strong-Tie THDB62800HMG Titen HD 5/8 in. x 8 in. Mechanically Galvanized Heavy-Duty Screw Anchor

    $118.46

    Features

    • Tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Thread design undercuts to efficiently transfer the load to the base material
    • Standard fractional sizes
    • Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
    • No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
    • Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
    • Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartDone
  • THD37300CS6SS

    [20 Pack] Simpson Strong-Tie THD50800H4SS Titen HD® 1/2 in. x 8 in. Type 304 Stainless-Steel Heavy-Duty Screw Anchor

    $222.15

    Features

    • THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
    • Ideal for exterior or corrosive environments
    • Less carbon steel, less expansion
    • Installs with an impact wrench or by hand tool
    • Tested in accordance with ACI355.2, AC193 and AC106
    Add To CartDone
  • [20 Pack] Simpson Strong-Tie THD50800HMG Titen HD 1/2 in. x 8 in. Mechanically Galvanized Heavy-Duty Screw Anchor

    [20 Pack] Simpson Strong-Tie THD50800HMG Titen HD 1/2 in. x 8 in. Mechanically Galvanized Heavy-Duty Screw Anchor

    $188.31

    Features

    • Tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Thread design undercuts to efficiently transfer the load to the base material
    • Standard fractional sizes
    • Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
    • No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
    • Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
    • Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartDone
  • [20 Pack] Simpson Strong-Tie THD50800H6SS Titen HD 1/2 in. x 8 in. Type 316 Stainless-Steel Heavy-Duty Screw Anchor

    [20 Pack] Simpson Strong-Tie THD50800H6SS Titen HD 1/2 in. x 8 in. Type 316 Stainless-Steel Heavy-Duty Screw Anchor

    $288.62

    Features

    • THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
    • Ideal for exterior or corrosive environments
    • Less carbon steel, less expansion
    • Installs with an impact wrench or by hand tool
    • Tested in accordance with ACI355.2, AC193 and AC106
    Add To CartDone