• THD37300CS6SS

    [20 Pack] Simpson Strong-Tie THD50612H4SS Titen HD 1/2 in. x 6-1/2 in. Type 304 Stainless Steel Heavy-Duty Screw Anchor

    $195.69

    Features

    • THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
    • Ideal for exterior or corrosive environments
    • Less carbon steel, less expansion
    • Installs with an impact wrench or by hand tool
    • Tested in accordance with ACI355.2, AC193 and AC106
    Add To CartDone
  • [20 Pack] Simpson Strong-Tie THD50612H Titen HD 1/2 in. x 6-1/2 in. Heavy-Duty Screw Anchor

    [20 Pack] Simpson Strong-Tie THD50612H Titen HD 1/2 in. x 6-1/2 in. Heavy-Duty Screw Anchor

    $50.40

    Features

    • Tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Thread design undercuts to efficiently transfer the load to the base material
    • Standard fractional sizes
    • Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
    • No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
    • Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
    • Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartDone
  • THD37600H

    [20 Pack] Simpson Strong-Tie THD50612HMG Titen HD 1/2 in. x 6-1/2 in. Mechanically Galvanized Heavy-Duty Screw Anchor

    $114.77

    Features

    • Tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Thread design undercuts to efficiently transfer the load to the base material
    • Standard fractional sizes
    • Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
    • No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
    • Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
    • Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartDone
  • [10 Pack] Simpson Strong-Tie THDB62612H4SS Titen HD 5/8 in. x 6-1/2 in. Type 304 Stainless Steel Heavy-Duty Screw Anchor

    [10 Pack] Simpson Strong-Tie THDB62612H4SS Titen HD 5/8 in. x 6-1/2 in. Type 304 Stainless Steel Heavy-Duty Screw Anchor

    $133.23

    Features

    • THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
    • Ideal for exterior or corrosive environments
    • Less carbon steel, less expansion
    • Installs with an impact wrench or by hand tool
    • Tested in accordance with ACI355.2, AC193 and AC106
    Add To CartDone
  • THD37300CS6SS

    [20 Pack] Simpson Strong-Tie THD50612H6SS Titen HD 1/2 in. x 6-1/2 in. Type 316 Stainless Steel Heavy-Duty Screw Anchor

    $254.15

    Features

    • THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
    • Ideal for exterior or corrosive environments
    • Less carbon steel, less expansion
    • Installs with an impact wrench or by hand tool
    • Tested in accordance with ACI355.2, AC193 and AC106
    Add To CartDone
  • [10 Pack] Simpson Strong-Tie THDB62612H Titen HD 5/8 in. x 6-1/2 in. Heavy-Duty Screw Anchor

    [10 Pack] Simpson Strong-Tie THDB62612H Titen HD 5/8 in. x 6-1/2 in. Heavy-Duty Screw Anchor

    $37.23

    Features

    • Tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Thread design undercuts to efficiently transfer the load to the base material
    • Standard fractional sizes
    • Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
    • No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
    • Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
    • Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartDone
  • THD37300CS6SS

    [10 Pack] Simpson Strong-Tie THDB62612H6SS Titen HD 5/8 in. x 6-1/2 in. Type 316 Stainless Steel Heavy-Duty Screw Anchor

    $140.24

    Features

    • THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
    • Ideal for exterior or corrosive environments
    • Less carbon steel, less expansion
    • Installs with an impact wrench or by hand tool
    • Tested in accordance with ACI355.2, AC193 and AC106
    Add To CartDone
  • [10 Pack] Simpson Strong-Tie THDB62612HMGF1 Titen HD 5/8 in. x 6-1/2 in. Mechanically Galvanized Heavy-Duty Screw Anchor

    [10 Pack] Simpson Strong-Tie THDB62612HMGF1 Titen HD 5/8 in. x 6-1/2 in. Mechanically Galvanized Heavy-Duty Screw Anchor

    $43.00

    Features

    • Tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Thread design undercuts to efficiently transfer the load to the base material
    • Standard fractional sizes
    • Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
    • No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
    • Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
    • Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartDone
  • [10 Pack] Simpson Strong-Tie THDB62612HMG Titen HD 5/8 in. x 6-1/2 in. Mechanically Galvanized Heavy-Duty Screw Anchor

    [10 Pack] Simpson Strong-Tie THDB62612HMG Titen HD 5/8 in. x 6-1/2 in. Mechanically Galvanized Heavy-Duty Screw Anchor

    $105.69

    Features

    • Tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Thread design undercuts to efficiently transfer the load to the base material
    • Standard fractional sizes
    • Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
    • No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
    • Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
    • Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartDone