“Simpson Strong-Tie SSP SSP 18-Gauge
Galvanized Single Stud Plate” has been added to your cart.
View cart
Showing all 24 resultsSorted by popularity
$ 0.52Features:
Embossments in bend line strengthen connection
The top flange features an arrow line indicator to aid correct installation
Made from 18-gauge steel
Galvanized (G90) for extra corrosion resistance
$ 5.19Features
The LRU26Z features an open design and ability to field-adjust the slope, ideal for both retrofit or new applications.
May be sloped down from 0° (0:12 pitch) to 49° (14:12). For slopes greater than 45°, allowable downloads are 0.85 of table loads.
May be sloped up from 0° to 45°.
For added versatility, the fasteners on the face of the hanger are placed high, enabling the bottom of the rafter to hang below the ridge beam (see “Max. C1” dimension in Standard Installation table).
Can be installed using nails or Strong-Drive SD Connector screws.
ICC-ES Evaluation Report
$ 0.65Features:
Embossments in bend line strengthen connection
The top flange features an arrow line indicator to aid correct installation
Made from 18-gauge steel
ZMAX galvanization offers extra corrosion resistance for exterior and treated-wood applications
$ 1.13Features:
Anchors mudsill to concrete block, poured walls or slab foundations
Nominal sill size: 2×4, 2×6, 2×8, 2×10, 2×12
Made from 18-gauge steel
ZMAX galvanization offers extra corrosion resistance for exterior and treated-wood applications
$ 2.13Features:
Straps are load rated with the correct thickness and number of fasteners, in contrast with field-fabricated straps
Loads have been increased for wind and seismic forces
Floor-to-floor clear span application
For use on the edge of 2x members
Length: 24 in.
$ 1.22Features:
Can be used to make a connection to either the top or bottom plate
Embossment in the angle reinforces the plate
Sill plate installation: fill all round holes
Width: 1-3/8 in.
Height: 6-11/16 in.
$ 5.29Features
The open design and ability to field-adjust the slope make the LRUZ ideal for both retrofit or new applications.
May be sloped down from 0° (0:12 pitch) to 49° (14:12). For slopes greater than 45°, allowable downloads are 0.85 of table loads.
May be sloped up from 0° to 45°.
For added versatility, the fasteners on the face of the hanger are placed high, enabling the bottom of the rafter to hang below the ridge beam
Can be installed using nails or Strong-Drive® SD Connector screws.
$ 3.00Features:
Replaces additional framing and toe-nailing
Suitable for most installations on nominal 2×10 or 2×12 header/rim board
May be installed flush with the top of the carrying member or lower on the face
Interchangeable for left or right applications
Made from 18-gauge steel
SALE 10% OFF
$ 15.99Original price was: $15.99. $ 14.39Current price is: $14.39. Features
BCS2-3/6Z BCS opposing flanges provide increased lateral resistance
Double-shear nailing for optimal strength
Sized specifically for multi-2x widths
$ 12.27Features
Opposing flanges provide increased lateral resistance
Attains full allowable load using either common nail or pneumatic nail sizes
Light-gauge material designed for light-duty applications
$ 20.99The BC post cap is designed to connect a beam to a post. The 18-gauge material of this post cap makes it ideal for light-duty connections. The BC provides uplift and lateral resistance and includes sizes for both nominal and rough lumber.
$ 2.74Features
Forms part of a continuous load path to resist wind and seismic forces
The H10A-2 model holds a double-ply member and is approved for installation with the Strong-Drive® SD Connector screw
The H10AR model is designed for rough lumber sizes
SALE 41% OFF
$ 118.97Original price was: $118.97. $ 69.99Current price is: $69.99. Features:
FASTENERS: The NT50AE2 Accepts 5/8 In. to 2 In. 18-gauge bradsTRIGGER: Selective actuation switch – easily select bump fire or sequential fireLIGHTWEIGHT: Only 2.2 lbs, for easy all day brad nailer useAWARD: Rated the Pro Preferred Nailer for 7 years running (2014 – 2020) by Builder and Developer MagazineWARRANTY: Covered by Metabo HPT’s Professional 5-Year Tool Warranty
$ 13.95Features:
Provides a positive connection for a post to a wood deck
Stronger than angled nailing or screw fastening
Reduces the chance of the post splitting and eliminates nailing into end grain
Not recommended for non top-supported installations (such as fences or unbraced carports)
Nominal post size: 4×6
$ 1.89Features:
Patented double-shear nailing design provides greater strength with fewer nails
Speed prongs for fast and easy installation
Angled joist nailing easier in tight spaces
Do not bend or remove tabs
Nominal joist size: 2×8 and 2×10
$ 3.03Features:
LUC-series hangers are tested, load rated and code compliant
The LUC series installs using several fastener selections with tested allowable loads
Suitable for nominal 2×10 and 2×12 lumber
Made from 18-gauge steel
ZMAX galvanization offers extra corrosion resistance for exterior and treated-wood applications
$ 2.41Features:
Patented double-shear nailing design provides greater strength with fewer nails
Speed prongs for fast and easy installation
Angled joist nailing easier in tight spaces
Do not bend or remove tabs
Nominal joist size: 2×10, 2×12, 2×14
$ 4.42Features:
Patented double-shear nailing design provides greater strength with fewer nails
Speed prongs for fast and easy installation
Angled joist nailing easier in tight spaces
Do not bend or remove tabs
Nominal joist size: Double 2×10 and Double 2×12
$ 30.43Features:
Provides a positive connection for a post to a wood deck
Stronger than angled nailing or screw fastening
Reduces the chance of the post splitting and eliminates nailing into end grain
Not recommended for non top-supported installations (such as fences or unbraced carports)
Nominal post size: 6x
$ 8.12Features:
Patented double-shear nailing design provides greater strength with fewer nails
Speed prongs for fast and easy installation
Angled joist nailing easier in tight spaces
Do not bend or remove tabs
Nominal joist size: Triple 2×8 and Triple 2×10
$ 18.35Features:
Provides a positive connection for a post to a wood deck
Stronger than angled nailing or screw fastening
Reduces the chance of the post splitting and eliminates nailing into end grain
Not recommended for non top-supported installations (such as fences or unbraced carports)
Nominal post size: 6x
$ 0.87Features:
Great for connecting 2x deck joists on top of a perpendicular beam
Install in pairs on either side of the rafter/truss/joist to provide resistance to uplift and lateral forces
Use also for a variety of connections where one member crosses another
Made from 18-gauge steel
Galvanized (G90) for extra corrosion resistance
$ 2.53Features:
Straps are load rated with the correct thickness and number of fasteners, in contrast with field-fabricated straps
Loads have been increased for wind and seismic forces
Floor-to-floor clear span application
Length: 24 in.
Width: 1-1/4 in.
$ 4.05Features:
Patented double-shear nailing design provides greater strength with fewer nails
Speed prongs for fast and easy installation
Angled joist nailing easier in tight spaces
Do not bend or remove tabs
Nominal joist size: Double 2×8 and Double 2×10
Simpson Strong-Tie SSP SSP 18-Gauge
Galvanized Single Stud Plate 
