“GMH01Z 40V max XGT Brushless Cordless 15 lb. AVT Demolition Hammer, accepts SDS‑MAX bits, AWS Capable, Tool Only” has been added to your cart.
View cart
Showing 161–196 of 196 resultsSorted by popularity
-
$445.99
Features
- Powerful motor delivers up to 10,000 PSI of Max pressure
- Features two speed modes; Low and Auto-Speed for better control
- Auto-Speed mode applies grease while varying the flow rate automatically matching the resistance of the part being greased
- Variable speed trigger allows the user to adjust discharge rate
- Lock-on button for user convenience during longer work periods
-
$1,127.99
Features
- Powerful 14 AMP motor delivers 18.8 ft.lbs. of impact energy to handle the most demanding applications
- Anti-Vibration Technology (AVT®) is an internal counterbalance system that greatly reduces vibration
- Additional vibration-absorbing rear handle is spring-loaded to further reduce vibration
- Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
- Soft start suppresses start-up reaction for more precision and better accuracy
-
$707.99
Features
- HM0871C features a owerful 10 AMP motor delivers 8.6 ft.lbs. of impact energy
- Additional vibration-absorbing rear handle is spring-loaded to further reduce vibration
- Soft start suppresses start-up reaction for better accuracy
HM0871C Instruction Manual
-
$654.99
Features
- Makita-built brushless motor along with 40V max XGT® battery combine to deliver up to 20% faster breaking efficiency than corded equivalent model*
- Constant speed control automatically applies additional power under load for optimum performance
- Extreme Protection Technology (XPT™) is engineered for improved dust and water resistance for operation in harsh conditions
- Anti-Vibration Technology (AVT®) is an internal counterbalance system along with vibration-absorbing handles that work together to reduce vibration
- Auto-start Wireless System (AWS®) utilizes Bluetooth® technology for wireless power-on/off communication between tool and dust extractor (AWS® Transmitter sold separately)
-
$546.25
This item has been DISCONTINUED.
-
$337.99
Features
- The Makita XWT18Z BL™ Brushless Motor delivers 520 ft.lbs. of Fastening Torque and 740 ft.lbs. of Nut-Busting Torque
- Compact and ergonomic design at only 6-11/16″ long
- 4-speed power selection switch (0-500 / 0-1,200 / 0-1,900 / 0-2,200 RPM & 0-1,000 / 0-1,700 / 0-2,400 / 0-2,700 IPM) for precise fastening control in a wide range of applications
- 3 forward and 3 reverse Auto-Stop modes for increased efficiency
- Full speed mode function reduces trigger pull to reach full speed
-
$424.99
Features
- BL™ Brushless Motor delivers 780 ft.lbs. of Fastening Torque and 1,250 ft.lbs. of Nut-Busting Torque
- 3-speed power selection switch (0-900/ 0-1,000/ 0-1,800 RPM & 0-1,800/ 0-2,000/ 0-2,200 IPM) provides precise fastening control for a wide range of applications
- 3/4″ anvil with friction ring and thru hole retention system for maximum productivity
- Efficient BL™ Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
- The BL™ Brushless Motor eliminates carbon brushes, enabling the BL Motor to run cooler and more efficiently for longer life
-
$870.99
Features
- Makita-built brushless motor along with 40V max XGT® battery combine to deliver the power performance required for heavy-load application
- Auto-start Wireless System (AWS®) utilizes Bluetooth® technology for wireless power-on/off communication between tool and dust extractor (AWS® Transmitter sold separately)
- Extreme Protection Technology (XPT™) is engineered for improved dust and water resistance for operation in harsh conditions
- Anti-Vibration Technology (AVT®) is an internal counterbalance system along with vibration-absorbing handles that work together to reduce vibration
- Active Feedback-Sensing Technology (AFT®) electronically turns off the motor if rotation of bit is suddenly forced to stop
-
$1,984.99
Features
- Quickly locates objects in multiple types of base materials to allow for immediate cutting, drilling, or coring for through penetrations
- Capable of detecting a variety embedded objects such as; metals (steel, aluminum, copper), wood, plastic and shielded electrical wire up to 7″ deep
- Selectable base material modes allow for increased versatility in dry concrete, wet concrete, wall partitions (wood or drywall) and hollow block
- Simplified user interface displays center, edge position, relative width and depth of embedded objects
- Multi-detection mode allows for scanning in up to three parallel surface positions; ideal for detecting objects running diagonally or detection affirmation
-
$289.99
Features
- Makita-built brushless motor delivers up to 565 CFM and 143 MPH
- Move heavy debris with turbo boost mode
- XPT™ is engineered to provide increased dust and water resistance in harsh job site conditions
- Up to 44% more blowing force than a 24.5cc gas blower
- Turbo boost mode delivers 565 CFM for heavy debris
-
$485.99
Features
- Makita-built motor delivers 13,000 VPM to help increase strength of concrete
- Dual-directional switch to conveniently hold the tool in either horizontal or vertical positions
- Up to 25 minute run time under load
- Compact and ergonomic design at only 58-1/2″ long
- Weighs only 7.7 lbs. with battery (battery not included) for reduced operator fatigue
-
$241.99
Features
- X-LOCK quick change system allows for tool-free wheel changes with simple snap-on mounting and pull release lever for change-out
- The BL™ Brushless Motor eliminates carbon brushes, enabling the BL™ Motor to run cooler and more efficiently for longer life; delivers 8,500 RPM
- Active Feedback-sensing Technology (AFT®) turns the motor off if rotation of the wheel is suddenly forced to stop
- Electric Brake stops the grinding or cut-off wheel in 2 seconds or less for maximum productivity
- Automatic Speed Change™ technology adjusts speed and torque during operation for optimum performance
-
$2,655.99
Features
- Performs up to 233 cuts of #5 rebar with one 18V LXT® 5.0Ah Battery
- Cutting capacity range of 1/8″- 5/8″
- Spark free cutting of rebar and steel rod
- The BL™ Brushless Motor eliminates carbon brushes, enabling the BL™ Motor to run cooler and more efficiently for longer life
- Fast and effortless cutting speed of #5 rebar in 2.8 seconds
-
$2,855.99
Features
- Up to 125 cuts of #6 (3/4″) rebar on a single charge using 5.0Ah LXT® Battery
- Cutting capacity range of 1/8″- 3/4″; cuts up to 60 grade #6 rebar
- 4-way rotatable cutting blade makes up to 4,000 cuts of #3 (3/8″) rebar before needing to be replaced
- Cutting head rotates 360° for different cutting positions
- Adjustable stopper holds the rebar at 90° to the cutting blade and assists in smooth cutting
-
$302.99
Features
- Sound pressure rating of 61 dB(A); measured per ANSI B 175.2 standard
- Makita-built motor produces a maximum air velocity of 120 MPH
- 6-stage air velocity/volume selection dial with variable speed control trigger
- Delivers up to 28 minutes of run time at 15,800 RPM using two 18V LXT® 5.0Ah batteries (batteries not included)
- Zero emissions and reduced maintenance; no need for gas or oil
-
SALE 6% OFF
$328.99 Original price was: $328.99.$309.25Current price is: $309.25.
Features
- Makita-built motor delivers 1,100 lbs. of dispensing force to dispense the highest viscosity adhesives and sealants
- 5 speed dial optimizes flow rate from 0-66 IPM
- Variable speed trigger allows user to match speed to the application
- 360° rotatable cartridge holder fits 10 oz. and 300 ml cartridges
- Drip-reduction feature automatically relieves pressure on the material when trigger is released to prevent unintentional dispensing
-
$378.99
Features
- Makita-built motor delivers 1,100 lbs. of dispensing force to dispense the highest viscosity adhesives and sealants
- 5-speed dial optimizes flow rate from 0-66 IPM
- Variable speed trigger allows user to match speed to the application
- 360° rotatable cartridge holder fits 20 oz. cartridges, sausage packs and bulk caulk and adhesives
- Includes 3 pistons for use with cartridges, sausage packs and bulk materials
-
$287.50
Features
- Makita-built motor delivers 1,100 lbs. of dispensing force to dispense the highest viscosity adhesives and sealants
- 5 setting speed dial optimizes flow rate from 0-66 IPM
- Variable speed trigger allows user to match the speed to the application
- 360° rotatable cartridge holder fits 28-29 oz. cartridges
- Drip-reduction feature automatically relieves pressure on the material when trigger is released to prevent unintentional dispensing
-
$400.99
Features
- Drives a range of 18 gauge brad nails from 5/8″ to 2″; magazine capacity up to 100 nails
- Drives up to 1,660 finish nails using a 5.0Ah 18V LXT® Battery (battery not included)*
- 2-mode selector switch for control of nailing operation
- “Tool-less” depth adjustment for precise flush and countersink finish
- Anti-dry fire mechanism engineered to prevent driving blanks and damage to work surface
-
$235.99
Features
- Brushless motor delivers 0-2,500 RPM with increased torque to handle high demand fastening applications
- Push Drive™ Technology – in lock-on mode the motor starts only when the fastener is engaged for a quieter work environment and to save battery power
- Depth adjustable nose piece delivers consistent screw fastening performance
- The BL Brushless Motor eliminates carbon brushes, enabling the BL™ Motor to run cooler and more efficiently for longer life
- Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
-
$264.99
Features
- Quick-Shift Mode™ uses the brushless motor’s electronic controls to find the best balance of speed and torque for each application for more efficient fastening
- Brushless motor delivers 3,600 Max RPM and 1,600 in.lbs. of Max Torque
- 4-speed power selection (0-1,100/ 0-2,100/ 0-3,200/ 0-3,600 RPM & 0-1,100/ 0-2,600/ 0-3,600/ 0-3,800 IPM) provides precise fastening control for a wide range of applications
- Additional one-touch 4-speed power selector button under the chuck for added convenience
- Assist Mode (A-mode) feature helps eliminate “screw cam-out” and “cross threading” by driving at low speed until tightening begins
-
$730.99
Features
- Makita-built brushless motor along with 40V max XGT® battery combine to deliver the power performance required for heavy-load application
- Constant speed control automatically applies additional power under load for optimum performance
- Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears during a bind-up situation
- XGT® technology delivers up to 135 of 3/8″ holes per charge using full charged 40V XGT® 4.0Ah battery*
- Quick change chuck allows for interchangeability from SDS-PLUS to 1/2″ keyless chuck for utilization of straight shank bits
-
$854.99
Features
- X2 LXT® technology delivers up to 140 1/2″ x 2-3/8″ holes per charge using two 18V LXT® 5.0Ah batteries
- Powerful BL™ Brushless motor delivers 0-980 RPM, 0-5,000 BPM and 2.3 ft.lbs. of impact energy to handle the most demanding applications
- Dust extraction capability with optional OSHA Table 1 compliant On-Board Dust Extractor Attachment
- Anti-Vibration Technology (AVT®) is an active internal counterbalance system which is engineered to reduce vibration for increased comfort
- Vibration-absorbing back handle and side handle further reduce vibration and increase comfort on the job
-
$435.99
Features
- Efficient BL™ Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
- The BL™ Brushless Motor eliminates carbon brushes, enabling the BL™ Motor to run cooler and more efficiently for longer life
- Compact and ergonomic design at only 12-7/8″ long
- Weighs only 7.2 lbs. with battery (battery not included) for reduced operator fatigue
- Variable speed trigger enables user to match the speed to application for greater versatility
-
$228.99
Features
- Makita-built variable speed motor delivers 0-1,200 RPM and 0-4,000 BPM
- 3-mode operation for “Rotation Only”, “Hammering with Rotation” or “Hammering Only” for multiple applications
- Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
- Faster drilling with synchronized RPM and BPM
- Job site tested shock absorbent handle protects the battery housing for extra durability
-
$637.99
Features
- Selectable horizontal/vertical cross reference lines required for level, align and plumb applications
- Up to 10 hours of continuous run time using included Makita 12V max CXT® 2.0Ah rechargeable battery; up to 20 hours of continuous run time using a 12V max CXT® 4.0Ah battery
- Green line visibility range up to 115’ depending on ambient light and detectable up to 262′ with Makita Laser Detector LE00855702 (sold separately)
- Bright 525 nm class II green laser for best-in-class visibility with +/-1/8” at 33’ for best-in-class accuracy
- Laser line fan angle spans past the 180° horizontal line and 160° vertical line positions for full reference line coverage
-
SALE 18% OFF
$197.99 Original price was: $197.99.$162.35Current price is: $162.35.
Features
- Equipped with Bluetooth® to wirelessly connect your mobile device
- Lantern delivers up to 310 lumens in a 360° pattern
- High-luminance L.E.D. flashlight provides 200 lumens
- Push-button operated digital tuner with 9 programmable stations for FM radio
- Radio runs up to 28 hours; Lantern runs 16 hours; Lantern and Radio run 10 hours with an 40V max XGT® 2.5Ah battery (battery not included)
-
$178.99
Features
- 4-mode operation: delivering 600 lumens on Spot, 1,000 lumens on Flood, 1,250 lumens on Spot/Flood, and Strobe mode
- Illuminates up to 640 yards in Spot and Spot/Flood mode
- Up to 10 hours of continuous illumination in Spot mode with 4.0Ah 40V max XGT® battery (battery not included)
- 90º pivoting head for user convenience
- Extreme Protection Technology (XPT™) is engineered for improved dust and water resistance for operation in harsh conditions
-
$120.99
Features
- High-luminance 18 L.E.D. flashlight provides 500 lumens on high
- 3-mode operation: delivers 500 lumens on High, 250 lumens on Medium, and 100 lumens on Low
- Flashlight head folds up and down with 7 positive stops and rotates left to right for multiple lighting angles
- Up to 82 hours of illumination with 4.0Ah 40V max XGT® Battery (battery sold separately)
- Up to 51 hours of illumination with 2.5Ah 40V max XGT® Battery (battery sold separately)
-
$72.99
Features
- High-luminance 4 L.E.D. flashlight provides 160 lumens
- 170° pivoting head with 12 positive stops
- Up to 55 hours of illumination with 4.0Ah 40V max XGT® Battery (battery sold separately)
- Up to 34 hours of illumination with 2.5Ah 40V max XGT® Battery (battery sold separately)
- Metal hang hook is convenient and job site durable
-
$435.99
Features
- 3-mode operation: delivers 10,000 lumens on High, 4,000 lumens on medium, and 2,000 lumens on Low
- Up to 2.4 hours of continuous illumination with two 4.0Ah 40V max XGT® batteries on high (batteries and charger not included)
- Up to 14 hours of continuous illumination with two 4.0Ah 40V max XGT® batteries on low (batteries and charger not included)
- Dust and water-resistant construction (IP65 rated) for improved operation in harsh job site conditions
- L.E.D. lights effectively illuminate work area without the high heat of halogens
-
$271.99
Features
- 3-mode operation: delivers 3,600 lumens on High, 1,800 lumens on Medium, and 900 lumens on Low
- Up to 3.5 hours of continuous illumination with a 4.0Ah 40V max XGT® battery on high (battery and charger not included)
- Up to 15 hours of continuous illumination with a 4.0Ah 40V max XGT® battery on low (battery and charger not included)
- Dust and water-resistant construction (IP65 rated) for improved operation in harsh job site conditions
- L.E.D. lights effectively illuminate work area without the high heat of halogens
-
$212.99
Features
- 2-mode operation: delivers 1,100 lumens on High and 450 lumens on Low
- Up to 22 hours of continuous illumination on low with a 4.0Ah 40V max XGT® (battery and charger not included)
- Up to 10 hours of continuous illumination on high with a 4.0Ah 40V max XGT® (battery and charger not included)
- Compatible with Makita® 40V max XGT® and 18V LXT® batteries (batteries not included)
- Dust and water-resistant construction (IP65 rated) for improved operation in harsh job site conditions
-
$44.89
ADD TO CART & CHECK OUT. Once we receive your request, we will contact you with pricing for shipping and to collect payment info for this product.
![West Chester 1027R PVC
Dipped Glove with Interlock Liner and Semi-Rough Finish - 12" Length [1
dozen]](https://heyden.dreamhosters.com/wp-content/uploads/2023/02/1017R-600x600.jpg)
West Chester 1027R PVC
Dipped Glove with Interlock Liner and Semi-Rough Finish - 12" Length [1
dozen]
1 × $26.29 
