“Dewalt DCS578X2 FLEXVOLT 60V MAX Brushless 7-1/4 in. Cordless Circular Saw with Brake Kit with 2 Batteries” has been added to your cart.
View cart
Showing 1–40 of 285 resultsSorted by popularity
$ 2,784.93
Features:
Double Tying Speed increases productivity
Cost Saving – Mechanism dispenses precise amount of wire
Shorter Tie Height
Large Jaw – up to #7 x #7 rebar
Long Battery Life up to 4,000 ties
Easy Push Gear Release
Fast Load Wire
$ 299.99
Features
Brushless motor delivers up to 75% more runtime vs. 18v NiCad brushed motors
XR Li-Ion batteries with fuel gauge provide 33% more capacity over standard packs
1/2-in ratcheting nitro-carburized metal chuck with carbide inserts
3-Mode LED up to 20X brighter than previous model
LED spotlight mode features 20 minute shutoff function allowing for extended work time
3-speed all-metal high performance transmission
0-450/0-1300/0-2000 RPM in drill mode
0-500/0-1500/0-2250 RPM in hammer drill mode
$ 3,067.57
Features:
Ties up to #9 x #10 rebar
Double The Speed – Dual Wire Feeding Mechanism
Dispenses precise amount of wire needed to form a tie
Shorter Tie Height
One charge yields up to 4,000 ties
Easy Load Tie Wire with Quick Load magazine
$ 229.32
Max USA Battery Charger The JC925 (JC925A) is a charger for select rebar tying tool and rebar cutter/bender batteries from Max USA. This charger delivers a full charge in 65 minutes achieving 80% in just 50 minutes regardless of AH rating. Charges OEM lithium ion (Li-on) batteries for the following Max tools: RB218 RB398 RB518…
$ 215.99
Features
Complete a wide variety of applications with up to 1,500 in-lbs of torque
Bright LED with 20 second trigger delay for working in dark or confined spaces
Variable speed trigger allows for control and precision on delicate work surfaces
Easily change bits with quick release hex chuck
$ 2,804.53
Features:
Replaces RB441T
Fastest Tying Speed
Cost Saving – Uses Less Wire!
Short Tie Height
Easy Wire Loading
Easy Handling
Built To Last
SALE 4% OFF
$ 317.99 Original price was: $317.99. $ 305.27Current price is: $305.27.
Features
77% more power when paired with FLEXVOLT batteries
delivers 5,500 RPM for faster cutting
Maximum depth of cut of 2-9/16 in. at a 90°
Maximum depth of cut of 2 in. at a 45°
Electric brake
$ 240.99
Features
Makita MP001GZ01 powerful Cordless High-Pressure Inflator delivers up to 160 PSI
High visibility pressure gauge display with back light
Auto-stop function automatically stops inflation
Three speed settings (High/Medium/Low)
25-1/2in hose length
$ 359.99
Features
Dewalt DCS578X2 features Up to 47% more power vs the DCS575**
Uses a 7-1/4 in. circular saw blade and features a maximum cut depth of 2-9/16 in. at a 90° bevel.
Maximum bevel capacity of 57° with bevel stops at 22.5° and 45°
Electric brake stops the blade after the trigger is released
Integrated LED for increased visibility and cut accuracy
Integrated rafter hook for quick and easy storage
$ 1,146.99
Features
The Dewalt DCS692X2 prevents accidental activation with a 2-stage trigger switch
Connect to other compatible tools and operate cord-free with WIRELESS TOOL CONTROL
Real-time power and runtime feedback to help you manage your output with an integrated heavy-load indicator light
3-1/4 in. cut depth for single pass in pavestones, rebar cutting, and concrete scoring
$ 617.99
Features
3.0 joules of impact energy provides corded power without the cord.
Optimized ergonomic design provides excellent control in all orientations
Durable three mode German engineered mechanism
Wide optimal drilling range between 1/4 in. and 3/4 in.
Factory-set clutch reduces sudden, high-torque reactions if bit jams.
Optimized ergonomic design provides an exceptional drilling and chipping experience in overhead, horizontal and downward orientations.
Constant speed under load for fast speed of application
$ 699.99
Features:
2 nails per second (16D / 8D / 6D)
900 nails per charge (w/ 36V 2.5Ah MultiVolt battery)
Pneumatic-like feel with no gas, no hose, no compressor and zero ramp-up time
Compatible with Duplex fasteners: 50214-6D: 2-1/4 x .131, 50234-8D: 2-3/4 x .131, 50312-16D: 3-1/2 x .131
SALE 14% OFF
$ 232.50 Original price was: $232.50. $ 199.99Current price is: $199.99.
Features
Makita XWT15Z features 240 ft.lbs. of Fastening Torque and 430 ft.lbs. of Nut-Busting Torque
3 forward and 3 reverse Auto-Stop modes
4-speed power selection
Weighs only 4.0 lbs. with battery
Tool Only
$ 399.00
Features
DeWalt DCK4050M2 Combo Kit
DCD805: 40% more power versus the DCD796B using DCB205 battery or DCBP034 DEWALT POWERSTACK battery (sold separately)
DCF850: Brushless motor that delivers up to 1,825 in-lb of torque and 3,250 rpm for driving large-diameter screws
DCS356: The DUAL-GRIP variable-speed trigger and 3-speed selector provide ultimate speed and application control, and the bright LED illuminates dark workspaces.
DCS382: FAST CUTS: Rapidly saw through various materials with 1-1/8 in. stroke length
$ 329.99
Features
Mix up to 19 premixed drywall buckets (4.5 gal) on a single charge using DCB606 Flexvolt battery (6Ah).
Mix up to 17 buckets of tile mortar (5 gal) on a single charge using DCB606 Flexvolt battery (6Ah)
Mix up to 9 buckets of concrete (4.5 gal) on a single charge using DCB606 Flexvolt battery (6Ah)
Integrated E-Clutch® System helps to improve user control.
3-Position side handle allows for optimum position while mixing.
$ 131.73
Features
DISCONTINUED, REPLACED with DCE512B
Wide-range, variable speed control
Multiple hanging options, free-standing, hang hooks, tripod-mount and wall-mount
$ 947.15
Features
DISCONTINUED – SEE DCS692X2 FOR UPDATED MODEL
Cuts up to 25.5 ft. of 1 in. scoring in cure concrete per charge
3-1/4 in. depth of cut for single pass in pavestones, rebar cutting, and concrete scoring
Heavy-load indicator light provides power and runtime feedback during demanding applications
5-position rotatable guard for approach angle selection, allowing for optimal visibility and accessibility when cutting in tight spaces
Dual-sided water feed system offers an OSHA Table 1 Compliant solution for dust management when cutting concrete
SALE 4% OFF
$ 152.50 Original price was: $152.50. $ 146.40Current price is: $146.40.
Features
Integrated L.E.D. battery charge level indicator allows user to monitor battery charge
Provides up to 65% more run time per charge compared to BL1830
Reaches full charge in 45 minutes or less
Compatible only with STAR Protection tools, indicated by the Star symbol™ and/or yellow battery receiver under the tool
$ 605.99
Features
13 Amp motor
9000 rpm no-load speed for applications with 6 in. grinder wheels
Brake engages when trigger is released with stopping speeds of 1.5 seconds when using a standard grinding wheel (4-1/2 in. x 1/4 in. bonded abrasive wheel, non-hubbed)
Kickback Brake engages when a pinch, stall, or bind-up event is sensed and the electronic brake engages with maximum force to quickly stop the wheel, reduce the movement of the grinder, and shut the grinder off
E-CLUTCH® activates in less than a tenth of a second when a pinch/stall is detected, shutting down the motor
Up to 30% more power vs the DCG414 Grinder
$ 227.99
Features
The Makita XBU07Z18V; 3-tools-in-1: blower, vacuum and mulcher for convenient clean-up
10:1 mulch ratio reduces up to 10 bags of leaves down to 1 bag with shredding blade
Makita-built brushless motor delivers up to 148 CFM and 143 MPH of blowing force
Brushless motor delivers up to 215 CFM and 13″ water lift of suction power
XBU07 Instruction manual
$ 741.99
Features
Makita AC001GM1 Drives up to 700 finish nails using a fully charged 40V XGT® 4.0Ah battery
Quiet Series designed with low noise emission at only 68 dB; ideal for indoor use
Lightest weight cordless compressor in its class; up to 10 lbs. lighter*
Up to 20% faster refill time from empty to full*
Drives up to 1,400 finish nails using a fully charged 40V XGT® 8.0Ah battery (8.0Ah battery not included)
SALE 24% OFF
$ 160.99 Original price was: $160.99. $ 121.97Current price is: $121.97.
Features
IP 54 Rated
Powerful Upgraded Motor to Provide Up To 650 CFM
Multiple hanging options – freestanding, hang hooks, and wall mount
Wide-Range, Variable Speed Control
Up to 4.5 Hours runtime on MAX airspeed (using a DEWALT 5.0Ah Battery)
$ 158.99
Features
Compact size ideal for precision trimming and edging
2-tools-in-1: 180º rotating head allows the trimmer to convert to edger
Telescoping shaft (48-1/4” to 56-1/2”) for optimum cutting position
Adjustable 5-position pivoting head for cutting angle adjustment when trimming in tight spaces
Makita-built motor delivers 7,800 RPM for faster cutting
$ 448.99
Features
The Dewalt DCF403D1 features a brushless motor delivers up to 2,100 lb of pulling force for fastening rivets, including those made of stainless steel
800 RIVETS PER CHARGE** to maximize productivity on the jobsite
DESIGNED FOR EASE OF USE with tool-free nose change and on-board nose piece storage
COMPATIBLE WITH MUTIPLE SIZE RIVETS including 3/32″, 1/8″, 5/32″, and 3/16″ rivets
CAPABLE OF PULLING aluminum, steel, and stainless steel blind rivets
$ 600.99
Features
Makita-built brushless motor along with 40V max XGT® battery combine to deliver powerful grinding and up to 60% faster cutting speed than predecessor models
X-LOCK quick change system allows for tool-free wheel changes with simple snap-on mounting and pull release lever for change-out
Electronic current limiter helps protect the motor from overload in high torque application
Variable speed control dial allows for RPM adjustment (3,000-8,500) to match the speed to the application
Auto-start Wireless System (AWS®) utilizes Bluetooth® technology for wireless power-on/off communication between tool and dust extractor (AWS® Transmitter sold separately)
$ 1,327.06
Features
19.4 Joules of impact energy for fast drilling and chipping, even in the hardest concrete.
Anti-Rotation E-CLUTCH System shuts down the tool in bind up situations.
Constant speed electronics allows the tool to maintain speed under load
The SHOCKS Active Vibration Control System reduces vibration felt by the user at the handles, compared to rotary hammers without this feature.
The heavy weight design makes it ideally suited for horizontal and downward drilling for #9 – #14 rebar dowel applications and dry coring up to 6 in.
$ 1,008.99
Features
6.1 Joules of impact energy for fast drilling and chipping, even in the hardest concrete.
Anti-Rotation E-CLUTCH ® System shuts down the tool in bind up situations.
Constant speed electronics allows the tool to maintain speed under load.
System reduces vibration felt by the user at the handles, compared to rotary hammers without thsis feature.
The light weight design makes it ideally suited for horizontal drilling for #3 – #6 rebar dowel applications and dry coring up to 3 in.
$ 1,516.99
Features
Dewalt DCH775X2 offers rapid drilling and chipping in hard concrete with 19.4 J of impact energy
Maintain speed under heavy loads with constant speed electronics
Efficient performance and runtime with brushless motor and German-engineered apparatus
Pro-grade versatility: Tackle horizontal and downward drilling for #9 – #14 rebar dowel applications, dry coring up to 6 in., chipping in any lower wall and floor, bushing, and ground rod driving
Reduced vibration for comfortable grip Active Vibration Control
$ 478.99
Features
Drives up to 700 finish nails using a fully charged 40V XGT® 4.0Ah battery (battery not included)
Quiet Series designed with low noise emission at only 68 dB; ideal for indoor use
Lightest weight cordless compressor in its class; up to 10 lbs. lighter*
Up to 20% faster refill time from empty to full*
Drives up to 1,400 finish nails using a fully charged 40V XGT® 8.0Ah battery (battery not included)
SALE 4% OFF
$ 164.99 Original price was: $164.99. $ 158.39Current price is: $158.39.
Features
DCC020IB features three power sources for on the go [20V MAX battery, 12V DC, or 110V AC]
Convenient onboard accessory storage
Heavy-duty rubber feet help reduce walking when in use
Threaded chuck for secure connection to inflation valve
High-pressure inflation mode with automatic shutoff
DCCO20IB Instruction Manual
$ 192.99
Features
Powerful motor delivers up to 740 CFM on high setting
Three speed settings (High/Medium/Low) and Oscillation selector for optimal air velocity and control
Designed for reduced wind noise level for quiet operation at only 52 dB
Oscillates 45º right and left
Up to 14 hours of continuous run time in Low speed with 18V LXT® 6.0Ah Battery BL1860B (battery not included)
$ 201.99
Features
Powerful motor delivers up to 740 CFM on high setting
Three speed settings (High/Medium/Low) and Oscillation selector for optimal air velocity and control
Automatically oscillates 45º right and left
Manually tilts 90º up and 45º down for convenient redirection of airflow
3-stage automatic timer with 1, 2, and 4 hour power-off selection
DISCONTINUED