Showing 241–280 of 5537 resultsSorted by popularity
-
$2,804.53
Features:
- Replaces RB441T
- Fastest Tying Speed
- Cost Saving – Uses Less Wire!
- Short Tie Height
- Easy Wire Loading
- Easy Handling
- Built To Last
-
$39.90
Features
- PFM1411100 is designed for standard ANSI tolerance drill bits
- Patented thread design offers low installation torque
- Tough threads for tapping high strength concrete
- Ratchet teeth on underside of hex washer head lock against the fixture
- Can be installed closer to the edge than traditional expansion anchors
-
$71.20
Features
- Radians RWG533 18 gauge green High Performance Polyethylene (HPPE) provides cut resistance
- Black sandy foam nitrile palm coating provides protection from abrasion in wet or dry conditions
- Seamless cuff design provides a comfortable fit
- Tested to EN 388 standards for Abrasion Resistance, Blade Cut, Tear, and Puncture ( 4 3 4 1)
- ANSI Cut Level A2, EN388 Cut Level 3
-
$101.59
Features
- Designed to meet stringent building codes for seismic or high-wind events
- Slotted for adjustability
- Features 1″ standoff to help prevent rot at post end
- Outdoor Accents side plates available (see APVBDSP)
- Fastener holes are slightly offset to help prevent fastener interference
-
SALEÂ 4% OFF
$317.99 Original price was: $317.99.$305.27Current price is: $305.27.
Features
- 77% more power when paired with FLEXVOLT batteries
- delivers 5,500 RPM for faster cutting
- Maximum depth of cut of 2-9/16 in. at a 90°
- Maximum depth of cut of 2 in. at a 45°
- Electric brake
-
$240.99
Features
- Makita MP001GZ01 powerful Cordless High-Pressure Inflator delivers up to 160 PSI
- High visibility pressure gauge display with back light
- Auto-stop function automatically stops inflation
- Three speed settings (High/Medium/Low)
- 25-1/2in hose length
-
-
$7.72
Features
- Long white Tampico fibers
- Dense filled fibers hold large amounts of acid solution
- Clean mortar from bricks
-
SALEÂ 6% OFF
$75.99 Original price was: $75.99.$71.43Current price is: $71.43.
Features:
- Manual dispensing tool
- EDT22S features a steel carriage and is engineered for high-volume, continuous use
- The tool can be easily convert from dispensing a 22 oz. 1:1 ratio cartridge to a 16.5 oz. 2:1 ratio cartridge
- For 22 oz. adhesive cartridges
-
$9.34
THREADED HANDLE CLEVIS ADAPTER
-
$403.37
Engineered to deliver enhanced safety measures and dependability, this pneumatic brad nailer from the SuperFinisher line adds the finishing touch to any doors, cabinets to securing delicate crown moldings finish jobs. The extremely lightweight NF255SF2/18 is built for an array of applications. Achieve the finishing touches that you want without the worry of damaging your…
-
$949.99
Features
- DCLE34035D1 features 9 hours of runtime per charge
- Remote-controlled operation
- Up to 260 ft. visible range
- Quick-head adjustment
- Drop alert detection
-
$35.29
Features
- Complements the Outdoor Accents APVB decorative post base
- Designed for use with 4x, 6x, 8x and 10x nominal lumber
- Decorative side plates are sold in boxes of 2
-
SALEÂ 4% OFF
$95.59 Original price was: $95.59.$91.76Current price is: $91.76.
Features
- APVGP1212 is easily installed with Outdoor Accents, structural screws and hex-head washers
- Fasteners sold separately
-
![West Chester 87010 Synthetic Leather Double Palm with Silicone Palm and Fabric Back - TPR Impact Protection [1 pair]](https://heyden.dreamhosters.com/wp-content/uploads/2023/02/87010-UP-600x600.jpg)
$22.39
Features:
- Discontinued-See 87810, 87015
- Synthetic leather palm enhances grip in dry and light oil applications while providing dexterity
- Silicone palm with honecomb pattern repels liquids for enhanced grip and abrasion
- Thermo Plastic Rubber (TPR) molded finger, thumb and back hand guards for maximum protection
- Hi-Vis coloring makes this product very easy to see
- Reinforced Kevlar thumb saddle for durability
- Neoprene slip on cuff
- Launderable for extended life and to reduce replacement costs
-
![West Chester 719DGU
Seamless Knit Polykor Blended Glove with Polyurethane Coated Flat Grip on
Palm & Fingers ANSI A2 Cut Resistance [1 dozen]](https://heyden.dreamhosters.com/wp-content/uploads/2023/02/719DGU-UP-600x600.jpg)
$35.59
Features:
- Seamless construction offers increased comfort and breathability
- Polykor blended shell is lightweight and provides excellent dexterity, tactile sensitivity and cut resistance
- Polyurethane coatings take on the surface properties of the glove liner providing a tactile grip in dry and slightly oily conditions, ideal for applications that require dexterity for precise handling
- Knit Wrist helps prevent dirt and debris from entering the glove
- Color coded hems for easy size identification
- 100% Silicone Free
- Washable, resistant to chemicals, water, and ultraviolet light
-
![West Chester 713HGWU
Seamless Knit Polykor Blended Glove with Polyurethane Coated Flat Grip on
Palm & Fingers ANSI A2 Cut Resistance [1 dozen]](https://heyden.dreamhosters.com/wp-content/uploads/2023/02/713HGWU-UP-600x600.jpg)
$58.49
Features:
- Seamless construction offers increased comfort and breathability
- Polykor blended shell is lightweight and provides excellent dexterity, tactile sensitivity and cut resistance
- Polyurethane coatings take on the surface properties of the glove liner providing a tactile grip in dry and slightly oily conditions, ideal for applications that require dexterity for precise handling
- Knit Wrist helps prevent dirt and debris from entering the glove
- Color coded hems for easy size identification
- Washable, resistant to chemicals, water, and ultraviolet light
-
$124.29
Features
- Certified welds for confidence in strength and loading
- Uplift loads increased for earthquake or wind loading
- Bolt spacing that meets NDS code requirements to ensure optimal performance
- Diamond holes to provide temporary fastening
-
$359.99
Features
- Dewalt DCS578X2 features Up to 47% more power vs the DCS575**
- Uses a 7-1/4 in. circular saw blade and features a maximum cut depth of 2-9/16 in. at a 90° bevel.
- Maximum bevel capacity of 57° with bevel stops at 22.5° and 45°
- Electric brake stops the blade after the trigger is released
- Integrated LED for increased visibility and cut accuracy
- Integrated rafter hook for quick and easy storage
-
-
-
$8.66
SLICKER 1/2 X 5/8
Minimum order quantity: 6
Order in multiples of: 6
-
$8.12
SLICKER 1/4 X 3/8
Minimum order quantity: 6
Order in multiples of: 6
-
$42.56
Features
- DFP18 Able to hold a variety of solutions
- Heavy-duty rubber material resistant to heat, cold, acid, chemicals, etc.
- Prevents rust, dents, leaks, and chips
-
$49.34
FLOOR SCRAPER
Minimum order quantity: 6
Order in multiples of: 6
-
-
-
$9.59
DURASOFT REPLACEMENT HANDLE
Minimum order quantity: 6
Order in multiples of: 6
-
$37.21
1-3/4in PB MAG HANDLE, 72in RED
Minimum order quantity: 6
Order in multiples of: 6
-
$36.36
1-3/4in PB HANDLE, 96in RED
Minimum order quantity: 6
Order in multiples of: 6
-
$20.72
PUSH BUTTON HANDLE SECTION
Minimum order quantity: 6
Order in multiples of: 6
-
$27.14
1-3/4in PB HANDLE, 72in BLUE
Minimum order quantity: 6
Order in multiples of: 6
-
$32.07
SWAGE OCTAGON HANDLE, 1-3/8in X 72in, CLEAR
Minimum order quantity: 6
Order in multiples of: 6
-
$32.79
MAGNESIUM FLOAT
Minimum order quantity: 6
Order in multiples of: 6
-
$16.11
EDGER, HAND
Minimum order quantity: 6
Order in multiples of: 6
-
$20.79
Features:
- The nailing pattern allows for nailing to the edges of double 2x’s
- Strap nail slots are countersunk to provide a lower nail head profile
- The slots below the embedment line enable increased front-to-back concrete bond and help to reduce spalling
- Standard strap length: 24-5/8 in.
- Made from 12-gauge steel
-
$0.00
ADD TO CART & CHECK OUT TO REQUEST PRICE QUOTE. Once we receive your request, we will contact you with pricing for this product
- 14 pockets inside and 23 pockets outside to organize tools and accessories.
- Padded web carrying handles and adjustable shoulder strap.
- 13½” x 3″ multi-compartment plastic parts tray to organize small parts on top for easy access.
- Large zippered inside pocket and heavy-duty tape clip.
- Approx. 18″L x 10″W x 11″H.
-
$885.99
Features:
- Air Actuated Counterbalance System
- Vibration Absorbing Housing
- Powerful 11 Amp Motor Delivers 8.4ft/lbs of impact energy
- Variable Speed Dial
- Soft Start and Soft No Load functions
-
SALEÂ 19% OFF
$2,613.46 Original price was: $2,613.46.$2,123.44Current price is: $2,123.44.
Features
- 15 AMP breaker hammer motor which delivers 53.9 ft.lbs./72.8 joules of impact energy
- Advanced AVT® Vibration Reduction Technology
- L.E.D. service light notifies the user approximately 8 hours before brushes need to be replaced
![West Chester 1027OR PVC
Dipped Glove with Insulated Foam Liner and Smooth Finish - 12" Length [1
dozen]](https://heyden.dreamhosters.com/wp-content/uploads/2023/02/1027OR-600x600.jpg)
West Chester 1027OR PVC
Dipped Glove with Insulated Foam Liner and Smooth Finish - 12" Length [1
dozen] 
AB4013 Marshalltown Broom-Float Adapter Bracket 
RED704433 Marshalltown Adapter Broom Extension Poly 
