Showing 81–120 of 5537 resultsSorted by popularity
-
$2,784.93
Features:
- Double Tying Speed increases productivity
- Cost Saving – Mechanism dispenses precise amount of wire
- Shorter Tie Height
- Large Jaw – up to #7 x #7 rebar
- Long Battery Life up to 4,000 ties
- Easy Push Gear Release
- Fast Load Wire
-
$101.59
Features
- Designed to meet stringent building codes for seismic or high-wind events
- Slotted for adjustability
- Features 1″ standoff to help prevent rot at post end
- Outdoor Accents side plates available
- Fastener holes are slightly offset to help prevent fastener interference
-
$102.77
- 1-1/2×0.145in Smooth Shank Concrete Pin
- Max Powerlite Fasteners
- Plywood To Concrete
- Fiber Cement Siding To Concrete
- Mechanically Galvanized Carbon Steel
-
![Boss 1SP0712 PVC Dipped Glove with Jersey Liner and Rough
Sandy Finish - 12" Length [1 pair]](https://heyden.dreamhosters.com/wp-content/uploads/2023/02/1SP0712-600x600.jpg)
$3.49
Features:
- Fully Coated, Double Dipped PVC
- Jersey Lined
- Sandy Grip
- 12″ Long
- Sanitized? Treated
-
$5.29
Features
- The open design and ability to field-adjust the slope make the LRUZ ideal for both retrofit or new applications.
- May be sloped down from 0° (0:12 pitch) to 49° (14:12). For slopes greater than 45°, allowable downloads are 0.85 of table loads.
- May be sloped up from 0° to 45°.
- For added versatility, the fasteners on the face of the hanger are placed high, enabling the bottom of the rafter to hang below the ridge beam
- Can be installed using nails or Strong-Drive® SD Connector screws.
-
$242.99
Features:
- Norton Clipper features premium iHD technology allows better cutting and consistency, increasing blade life
- Anti-crack ellipsoidal gullets resists cracking of steel core under extreme conditions
- Stroboscopic indicators eliminate overcutting and allow faster cooling of blade
- Segment wear indicators show remaining blade life
-
$10.66
HANDLE-MAGNESIUM FLOAT-DURASOFT
Minimum order quantity: 12
Order in multiples of: 12
-
$5.91
GROOVER
Minimum order quantity: 12
Order in multiples of: 12
-
$5.69
EDGER
Minimum order quantity: 12
Order in multiples of: 12
-
$39.72
- This item has been DISCONTINUED.- SEE ET3G22-N FOR UPDATED MODEL
-
$6.69
Features
- Versatile utility connector for joining wood members together in a corner connection without angled cuts
- Fastens with Simpson Strong-Tie® Outdoor Accents 1 1/2″ connector screws (not included)
- Easier and stronger than angled fastening
-
$35.89
Features:
- Steel Blade Placer With No Hook
- Concrete kumalong
- 14 Gauge Steel
- Painted Finish Resists Rust and Corrosion
- 60 Inch Contoured and Tapered Handle
-
$10.29
Features
- DFM12722 is available in several head styles
-
SALEÂ 5% OFF
$101.59 Original price was: $101.59.$96.51Current price is: $96.51.
Features
- Designed to meet stringent building codes for seismic or high-wind events
- Slotted for adjustability
- Features 1″ standoff to help prevent rot at post end
- Outdoor Accents side plates available (see APVBDSP)
- Fastener holes are slightly offset to help prevent fastener interference
-
![West Chester 500DC
Superior Grade Split Cowhide Leather Palm Glove with Canvas Back - Washable
Duck Safety Cuff [1 dozen]](https://heyden.dreamhosters.com/wp-content/uploads/2023/02/500DC-UP-600x600.jpg)
$36.59
Features:
- Gunn cut pattern delivers excellent durability, wear and comfort, especially for heavier gloves
- Wing thumb increases comfort in open-handed work
- Rugged extra strength back and cuff
- Leather knuckle strap and finger tips for extra protection
- Elastic closure sewn inside glove for safety and comfort
- Duck safety cuff helps protect wrist, allows for fast removal, and is washable for longer wear
-
$5.59
Features
- 14 gauge
- ZMAX galvanized with black powder coat
-
$299.99
Features
- Brushless motor delivers up to 75% more runtime vs. 18v NiCad brushed motors
- XR Li-Ion batteries with fuel gauge provide 33% more capacity over standard packs
- 1/2-in ratcheting nitro-carburized metal chuck with carbide inserts
- 3-Mode LED up to 20X brighter than previous model
- LED spotlight mode features 20 minute shutoff function allowing for extended work time
- 3-speed all-metal high performance transmission
- 0-450/0-1300/0-2000 RPM in drill mode
- 0-500/0-1500/0-2250 RPM in hammer drill mode
-
-
$36.22
SWAGE OCTAGON HANDLE, 1-3/4in X 72in, CLEAR
Minimum order quantity: 6
Order in multiples of: 6
-
-
$0.00
ADD TO CART & CHECK OUT TO REQUEST PRICE QUOTE. Once we receive your request, we will contact you with pricing for this product
- 20′ sticks
- Available for fabrication
-
$8.31
Features
- Back of Glove is Elastic
- DPG32 offers a comfortable fit
- Keystone Thumb
- Split Leather Palm Patch
- Tough thread Double Stitching
-
SALEÂ 14% OFF
$43.29 Original price was: $43.29.$37.22Current price is: $37.22.
Features
- Combined with the Outdoor Accents structural wood screw (SDWSDBB), it provides a structural load-rated solution
- Easy to install
- Code listed in IAPMO-UES ER-192
-
$155.89
Features
- Designed to meet stringent building codes for seismic or high-wind events
- Slotted for adjustability
- Features 1″ standoff to help prevent rot at post end
- Outdoor Accents side plates available
- Fastener holes are slightly offset to help prevent fastener interference
-
$30.04
8X14 FLAT FIN. BLD, ROUNDED
Minimum order quantity: 4
Order in multiples of: 4
-
$169.99
Features
- REPLACED WITH 5.0AH BATTERY JPL91450A
- 14.4 Volts 4 Amp Hour capacity
- Works with RB217, RB218, RB397, RB398, RB441T, RB517, RB518, and PJID143 tool models.
- Fully charged in 40 minutes or less.
- Built in charge indicator gauge on battery casing.
- Compatible with Max JC914, JC925 and JC928 chargers.
-
![Grippaz 67-308 Extended Use Ambidextrous Nitrile Glove with Textured Fish Scale Grip - 8 Mil [1 bag]](https://heyden.dreamhosters.com/wp-content/uploads/2023/02/67-308-UP-600x600.jpg)
$14.89
Features:
- Patented design on the inside and outside of glove provides excellent grip for handling wet, slippery food
- 8 mil proprietary nitrile blend with patented fish scale pattern is more tear-resistant and puncture- resistant than conventional single- use disposable gloves ? for prolonged use and reduced waste
- Specially formulated for excellent performance with fatty foods
- ESD Safe, Surface Resistance per ASTM D257, Static dissipative range at 10^8 ohms, 12%RH, 48hrs @100Volts
- Material complies with 21 CFR in repeated use and contact applications
- Proprietary nitrile blend offers enhanced flexibility, comfort and mobility ? reducing hand fatigue
- Food grade blue gloves and packaging for alignment with food safety protocols
- Ambidextrous glove design reduces waste by eliminating the need to split pairs
- Touchscreen compatible to allow the user to operate a touch screen phone or device without removing gloves
-
$199.99
- JE400 Extension Arm is designed for adjustable height tying
- Compatible with RB441T, RB443T, RB611T, RB398S, RB518, RB218, RB655
-
$3,067.57
Features:
- Ties up to #9 x #10 rebar
- Double The Speed – Dual Wire Feeding Mechanism
- Dispenses precise amount of wire needed to form a tie
- Shorter Tie Height
- One charge yields up to 4,000 ties
- Easy Load Tie Wire with Quick Load magazine
-
$0.90
Features
- Super soft Jelli Snug Plugs are washable and reusable
- FDA approved materials are non-toxic
- This product is made in the USA
- Flip-top case conveniently stores plugs
- Custom imprinting available on case top
-
![PIP 35-CB604 Extra Heavy
Weight Seamless Knit Cotton/Polyester Glove - White with Extended Cuff [1
dozen]](https://heyden.dreamhosters.com/wp-content/uploads/2023/02/35-CB604-UP-600x600.jpg)
$13.09
Features:
- Seamless cotton/polyester knit shell is comfortable and flexible
- Knit Wrist helps prevent dirt and debris from entering the glove
- Extended cuff adds additional length to protect the forearm
- Reversible design allows replacing one glove at a time, rather than pairs
- Can be used as a glove liner
- Small size fits ladies well
- Complies with FDA food handling requirements 21 CFR, Part 177
-
$2.26 – $3.09
Features
- Safety glass exceeds ANSI Z87.1+ standards.
- Rubber tipped temples provide a secure, comfortable fit.
- Distortion free lens provides fatigue free use.
- Sleek design allows for a perfect fit for both men and women, ensuring worker compliance.
- Weighs less than 1 ounce to provide all day comfort.
-
$3.25 – $3.60
Features
- Full Wraparound Design
- Soft, adjustable rubber nosepiece
- Rubber temple grips
- Extended lens protection
- Adjustable, ratcheting temple
-
$6.53 – $28.25
Features
- Adjustable rubber nosepiece for added comfort
- Dual Mold, rubber temple grips for better stability
- Hard coat polycarbonate lens protects against scratches
- Provides 99.9% UV protection
- The Crossfire ES4 Complies with ANSI Z87.1 standards
-
$8.99
Features
- Rubber Nosepiece for all day comfort
- Dual Mold, Rubber Temple Grips for better stability
- Hard coat polycarbonate lens protects against scratches
- Provides 99.9% UV protection
- Complies with ANSI Z87.1 standards
-
$6.00
Features
- 13 gauge knitted HPPE orange outer shell with fiberglass and stainless steel
- Black sandy nitrile coated palm
- Seamless cuff design
- Load weight of 4480g
- Tested to EN 388 standards for Abrasion Resistance, Blade Cut, Tear, and Puncture (4 X 4 3 F)|ANSI Cut Level A7, EN388 Cut Level 5, ANSI Abrasion 6, ANSI Puncture 3
-
$4.92
Features
- Water Resistant
- Breathable
- Fully Coated Nitrile
- Nylon Shell
-
$10.07
Features
- Foam Padded Palm
- Foam Padded Knuckles
- Synthetic Leather Fingertip
- Terry Cloth Brow wipe
- Hook and Loop Wrist Closure
-
$9.39
Features
- Installs quickly and easily with our Outdoor Accents 3 1/2″ structural wood screw and Outdoor Accents hex-head washer (sold separately)
- Easily attaches knee braces to posts or beams
- Adds decorative flair to knee brace connections
-
![Boss 9120 Top Grain Sheepskin Leather Drivers Glove with
Impact Protection and Aramid Blend Lining ANSI A4 Cut Resistance [1 pair]](https://heyden.dreamhosters.com/wp-content/uploads/2023/02/9120-UP-600x600.jpg)
$15.79
Features:
- Sheepskin leather palm and back is more supple than cowhide so they’re broken in from the start
- Para-Aramid lining offers comfort, enhanced cut protection and good heat dispersion
- Kevlar? yarn for stitching is heavy duty and more durable
- Thermo Plastic Rubber (TPR) back-of-hand impact resistance to knuckles and fingers by dispersing impact force energy away from the bone, without sacrificing dexterity
- Drivers gloves feature slip-on styling to provide good fit and comfort
- Keystone thumb is ergonomic, reduces hand fatigue, offers superior dexterity and durability
