Showing 641–680 of 976 resultsSorted by popularity
-
$284.99
Features
- Quiet Series design at only 58 dB for operator and crew comfort; ideal for indoor use)
- Runs at a lower RPM (1,750) resulting in longer motor and pump life)
- Complete roll-cage construction provides protection to withstand a variety of job-site, transporting, and storage environments)
- Oil-free dual-piston pump designed for maintenance-free operation)
- Lightweight design for increased job site portability)
-
$441.99
Features
- Quiet Series design at only 60 dB for operator and crew comfort; ideal for indoor use)
- Runs at a lower RPM (1,750) resulting in longer motor and pump life)
- Complete roll-cage construction provides protection to withstand a variety of job-site, transporting, and storage environments)
- Oil-free dual-piston pump designed for maintenance-free operation)
- Lightweight design for increased job site portability)
-
$450.99
Features
- Cast iron pump with Big Bore™ cylinder and piston is engineered to provide faster recovery time for improved performance
- Powerful 2.5 HP 4-Pole motor produces 4.2 CFM at 90 PSI for increased productivity and lower noise
- Roll-cage construction provides complete protection to withstand extreme jobsite environments
- Low AMP draw reduces incidences of tripped breakers at start-up
- Pump is oil-lubricated for cooler running temperatures and reduced wear
-
$14.99
Features
- 1/4″ connection to connect your high pressure tools to your compressor
- Quick coupler for quick and easy changes between hoses
- Durable metal construction for longer life
- Use with Makita AC310H High Pressure Compressor
-
$314.99
Features
- B-80020 is up to 2X less weight than heavier hoses
- Highly flexible and less kinks for easy rolling
- More durable than vinyl hoses for longer life and improved performance
- Includes fittings for added value and convenience
- All weather resistant
- For use with high pressure compressors and nailers
-
$621.99
Features
- Self-righting design keeps work light in upright position
- 3-mode operation: delivers 5,500 lumens on High, 3,000 lumens on medium, and 1,500 lumens on Low
- 3 illumination range modes: 360º, left 180º, and right 180º
- Battery or corded operation; compatible with 18V LXT® batteries (batteries and charger not included)
- Up to 3.3 hours of continuous illumination with two 5.0Ah 18V LXT® battery on high (batteries and charger not included)
-
$496.99
Features
- Three adjustable light heads rotate 180° vertically
- Extends to an overall height of 7-1/4 ft. with a foldable design for quick setup and takedown
- 3-mode operation; delivers 3,000 lumens on High, 1,700 lumens on Medium, and 900 lumens on Low
- Daylight white L.E.D.s produce a clearer light
- L.E.D. lights effectively illuminate work area without the high heat of halogens
-
$433.99
Features
- Extends to an overall height of 7-1/4 ft. with a foldable design for quick setup and takedown
- Adjustable head rotates 220° vertically and pivots 230° horizontally
- 3-mode operation; delivers 3,000 lumens on High, 1,700 lumens on Medium, and 900 lumens on Low
- Daylight white L.E.D.s produce a clearer light
- L.E.D. lights effectively illuminate work area without the high heat of halogens
-
$363.99
Features
- 3-mode operation: delivers 10,000 lumens on High, 4,000 lumens on medium, and 2,000 lumens on Low
- Up to 1.7 hours of continuous illumination with two 6.0Ah 18V LXT® battery on high (batteries and charger not included)
- Up to 8.5 hours of continuous illumination with two 6.0Ah 18V LXT® battery on low (batteries and charger not included)
- Dust and water-resistant construction (IP65 rated) for improved operation in harsh job site conditions
- L.E.D. lights effectively illuminate work area without the high heat of halogens
-
$250.99
Features
- 3-mode operation: delivers 3,000 lumens on High, 1,500 lumens on medium, and 750 lumens on Low
- Up to 3 hours of continuous illumination with a 6.0Ah 18V LXT® battery on high (battery and charger not included)
- Up to 13 hours of continuous illumination with a 6.0Ah 18V LXT® battery on low (battery and charger not included)
- Dust and water-resistant construction (IP65 rated) for improved operation in harsh job site conditions
- L.E.D. lights effectively illuminate work area without the high heat of halogens
-
$1,071.99
Features
- Powerful 10.0 AMP motor delivers more output and 10,500 RPM
- Constant Speed Control automatically applies additional power to the motor to maintain speed under load
- Soft start suppresses start-up reaction for more precision and longer tool life
- Electronic current limiter helps protect the motor from overload
- Anti-restart prevents accidental start up after power loss
- Large two-finger trigger switch with lock-on for continuous operation
-
$607.99
Features
- Constant Speed Control automatically applies additional power to the motor to maintain speed under load
- Powerful 10 AMP motor delivers more output and 10,500 RPM
- Soft start suppresses start-up reaction for more control and longer tool life
- Electronic current limiter helps protect the motor from overload
- Anti-restart prevents accidental start up after power loss
- Large two-finger trigger switch with lock-on for continuous operation
-
$381.99
Features
- BL Brushless Motor delivers 740 ft.lbs. of Fastening Torque and 1,180 ft.lbs. of Nut-Busting Torque
- 3-speed power selection switch (0-900/ 0-1,000/ 0-1,800 RPM & 0-1,800/ 0-2,000/ 0-2,200 IPM) provides precise fastening control for a wide range of applications
- The BL™ Brushless Motor eliminates carbon brushes, enabling the BL Motor to run cooler and more efficiently for longer life
- The electronically-controlled BL™ Brushless Motor efficiently uses energy to match torque and RPM to the changing demands of the application
- Weighs only 7.9 lbs. with battery (battery not included) for reduced operator fatigue
-
$210.99
Features
- Makita XDT131 features a built brushless motor that delivers 1,500 in.lbs. of Max Torque
- Variable speed (0-3,400 RPM & 0-3,600 IPM) for a wide range of fastening applications
- Convenient 1/4″ hex chuck for quick bit changes
- Built-in dual L.E.D. lights illuminate the work area
- 3-year limited warranty on tool, battery and charger
-
$502.99
Features
- Powered by two LXT batteries; X2 LXT technology delivers more power, speed and run time without the hassles of a cord
- Makita built electronically controlled BL™ Motor delivers 6,000 RPM for maximum performance and 50% longer run time per charge
- X2 LXT® technology delivers up to 610 crosscuts per charge in 2×4 SPF lumber and up to 320 crosscuts per charge in 2×10 SPF lumber using two 5.0Ah batteries
- Large 2-5/8” cutting capacity at 90°
- Electric brake for maximum productivity
- 0°- 56° bevel capacity with positive stops at 22.5°, 45°, and 56°
-
$284.99
This item has been DISCONTINUED.
-
$798.99
Features
- Makita-built motor delivers 12,500 VPM to help increase strength of concrete
- Dual directional switch to conveniently hold the tool in either horizontal or vertical positions
- Compact and ergonomic design at only 105-1/2″ long
- Protective cover helps prevent battery contamination
- 18V LXT® Lithium-Ion 5.0 Ah battery BL1850B reaches a full charge in 45 minutes or less
-
$345.75
Features
- The BNCE-20 rotary rebar cutting saw is designed to cleanly cut the material FLUSH with the surface, ideal for cutting tails off of block wall construction
- Tool features a unique flush-cutting blade guard that greatly reduces blade exposure
- Also has a double insulated power harness and is ETL/UL certified and listed
- Tool is designed to emit minimal cutting sparks
- Cut material is virtually burr-free and cool to the touch
- Proprietary cutting blades are inexpensive and an extra blade comes with every tool
-
$125.99
Features
- Bit extracts dust while drilling for less dust, fast holes and fast adhesive anchor installation
- Y-cutter carbide design for exact positioning, perfect starting & maximum durability
- Connects directly to DeWalt’s airlock system forming a secure, locking connection between bit and dust extractor
- Part of DEWALT’s complete cordless anchoring solution
-
$135.89
Features
- Bit extracts dust while drilling for less dust, fast holes and fast adhesive anchor installation
- Y-cutter carbide design for exact positioning, perfect starting & maximum durability
- Connects directly to DeWalt’s airlock system forming a secure, locking connection between bit and dust extractor
- Part of DEWALT’s complete cordless anchoring solution
-
$168.99
Features
- Cordless angle grinder delivers 8,000-RPM for high-power cutting and grinding applications
- Quick-change™ wheel release allows for tool free wheel changes without the need for a wrench
- Tool-free guard allows for quick, easy guard adjustments/positioning
- 2-finger trigger switch with lock-off button for convenient activation and easier gripping
- 2-position side handle provides greater control, comfort and versatility when in use
- 20-volt rechargeable battery required (battery and charger sold separately)
- 2-position side handle offers greater control, comfort and versatility
-
$79.99
Features
- CLOSEOUT ITEM LIMITED STOCK AT THIS PRICE
- 360-Degree Handle For Multiple Orientation Use
- Powerful Brightness at 2,000-Lumen Output
- Natural Daylight Hue
- IP54 Rated – Water and Dust Ingress Protection
- Compact and lightweight at only 3-lbs. (tool only)
- Tripod Mountable – 5/8-in-11 and 1/4-in-20
-
$520.99
Features
- For comfortable use when working in tight spaces with compact and lightweight design
- LED work light
- Helps Prevent Overtightening and Fastener run off with Precision Wrench control
- 4 speed settings and a variable speed trigger
- 600 ft-lbs of max fastening torque and 800 ft-lbs of max breakaway torque
-
$387.99
Features
- DEWALT built brushless motor and XR Li-ion batteries deliver more run time and capacity over standard units
- DCF887M2 features a 3-speed settings for optimized application versatility
- Precision drive in speed 1 for precision applications and added control
- 3 LED lights with 20 second delay after trigger release, provide visibility without shadows
- 1-handed loading 1/4-in hex chuck with easy grip sleeve, accepts 1-in bit tips
- Compact and lightweight design to fit into tight areas (6 mm shorter than the previous DCF886)
- Includes 1 DCF887 20-volt MAX XR 1/4-in 3-speed impact driver, two 4.0-Ah 20-volt MAX XR batteries, 1 fast charger, 1 belt hook
-
$569.99
Features
- Centered handle position provides superior balance and ergonomics and allows for more accurate cuts and less user fatigue
- LED work light with 20 second delay illuminates dark work surfaces for accurate cutting
- Integrated hang hook allows user to hang the saw without damaging the front handle or base
- Blade tracking adjustment increases blade life by providing better blade tracking
- Tool-free blade changing lever loosens blade tension to allow for blade change
- Dual-bearing blade guide rollers provides increased durability in the blade support system
- Ergonomic soft grip back handle provides comfort and flexibility
-
$559.00
Features
- OSHA Table 1 Compliant when paired with DWH303DH On Board Extractor
- Brushless motor and durable German-engineered mechanism for efficient performance and runtime.
- Rotating Dial to set tool to a specific application mode – Drill, Hammer Drill, or Chip.
- SHOCKS™- Active Vibration Control significantly reduces vibration and increases user comfort and productivity, A Perform and Protect Feature
- 2.1 Joules impact energy provides corded power without the cord
-
$317.99
Features
- UP TO 50% MORE POWER WITH FLEXVOLT® BATTERIES
- FAST CUTTING: 1-1/8 in. stroke length delivers a fast cutting speed
- EASY BLADE CHANGES: Keyless lever-action blade clamp for quick and easy blade changes
- BLADE CONTROL: Variable-speed trigger with 0-3,000 spm provides blade control
- INCREASED VISIBILITY: Bright LED for better visibility in low-light work areas
- Tool Connect™ Chip Ready: Chip pocket accepts Tool Connect™ Chip DCE042 and connects with Tool Connect™ Site Manager app for easy asset management on the jobsite. (DCE042 sold separately)
- COMPATIBLE with all DEWALT® 20V MAX* and FLEXVOLT® Batteries
-
$53.99
Features
- Bull Point (Moil Point) used for chipping and breaking applications in a variety of masonry products
- Slotting chisel is used for removing grout from brick and for controlled breaking applications
- Scaling chisel (wide chisel) is used for removing tile, concrete splatter, and other excess material
- Manufactured by DEWALT
-
$17.99
Features
- Cold chisel (narrow chisel) is used for channeling or breaking in a straight line
- For use with all brands of SDS max demolition hammers and rotary hammers with chipping function
- Fully hardened steel body delivers increased life and durability
-
$49.99
Features
- High diamond concentration for long life and aggressive material removal
- Large grinding segments with heat treated steel bodies which provides increases durability and wheel life
- Dry grinding of concrete and other masonry materials
- Smoothing of uneven surfaces
-
$10.99
Features
- Segmented rim blades are laser-welded with heat-treated steel bodies
- These blades ideal for tough masonry applications
- Can be used wet or dry
-
$2.09
Features
- More Cuts. Fewer Wheels.TM
- 50% Longer Life, Replace less often with Temper Point grains that are tougher and razor sharp. Better adhesion between the coated grains and resin creates a longer lasting cutting edge that wears
- Extremely Versatile: Efficiently cut a wide range of metals including carbon steel, stainless and nickel-based alloys.
- Aggressive Cutting Action: Make fast cuts with a thin wheel design and high-grain concentration.
- Durable By DesignTM: Built with two sheets of fiberglass for wheel strength. Designed to reduce wheel breakage.
-
$3.79
Features
- Premium abrasive cloth provides up to 15 X longer life than fiber resin metal sanding discs
- Type 29 fiberglass backing provides grinding angle of 20-25 degrees
- Abrasive Material: Zirconia
-
SALE 20% OFF
$495.00 Original price was: $495.00.$395.00Current price is: $395.00.
Features
- The DCD999 Hammer Drill gets up to 42% more power** when paired with FLEXVOLT® batteries
- Both tools compatible with all DEWALT® 20V MAX* and FLEXVOLT® Batteries
- 20X BRIGHTER LED: The DCD999 3-mode LED provides lighting in dark or confined spaces up to 20x brighter than the DEWALT DCD985
- EXTENDED WORK TIME WITH LED: The DCD999 features an LED spotlight mode features 20 minute shutoff function allowing for extended work time in dark or confined spaces
- VERSATILITY: The DCF887 has application versatility with 3-speed settings
-
$12.59
Features
- LONG-LASTING PERFORMANCE with up to 2X the life of Diablo
- BUILT FOR LONG LIFE with mulit-tooth design for aggressive cuts
- DESIGNED for DURABILITY from Proprietary welded carbide tips
- SMOOTH, EFFORTLESS CUTTING with large heat vents for cool cuts
- Large Heat Vents For Cool Cuts and Effortless Smooth Cuts
-
$9.99
Features
- Reinforced soulder for impact resistance in nail-embedded wood
- anti-stick coating reduces friction and gumming
- Thin kerf design for smooth cuts
- High-density tungsten carbide for toughness, wear-resistance, and long life
- Patented body slots reduce vibration for exceptional feel
- Exclusive, patent-pending ToughTrack tooth design for accurate tracking over the life of the blade
-
$14.99
Features
- Lifetime warranty
- Chrome vanadium steel
- Impact universal joint
-
$22.90
Features
- 50% taller (13mm) segments are designed for longer life and faster cutting
- Up to 4x longer life than competitive blades
- Optimum bond matrix provides a faster, longer lasting, and smoother cutting
- Carefully tensioned for less vibration and a superior user experience
- Dry or wet cutting for added versatility
- Made with high quality diamonds
- For smoother and finer cuts in masonry products
-
$22.90
Features
- feat1
- 50% taller (13mm) segments are designed for longer life and faster cutting
- For cutting concrete, block, brick, and pavers
- Optimum bond matrix provides a faster, longer lasting, and smoother cutting
- Up to 40% faster cutting than turbo blade
- Carefully tensioned for less vibration and a superior user experience
- For use with angle grinders
- Dry or wet cutting for added versatility
-
$133.59
Features:
- Diablo Rebar Demon™ SDS-Plus 4-Cutter Full Carbide Head Hammer Bit
- Diablo made Dura-Carbide™ withstands impact and high heat applications, dramatically extending life versus standard hammer bits
- Precision Tip delivers stability and accuracy required for fast, precise holes
- Tri-Metal Diffusion Bonding provides heat resistance and prevents breakage of the full-carbide heat for maximum life and productivity
Pyramex HP24110 Hard Hats Full Brim 4 Pt Ratchet Suspension
1 × $10.49 ![West Chester 1017ORF PVC
Dipped Glove with Jersey Liner and Rough Finish - Insulated & Waterproof
[1 dozen]](https://heyden.dreamhosters.com/wp-content/uploads/2023/02/1017ORF-600x600.jpg)
West Chester 1017ORF PVC
Dipped Glove with Jersey Liner and Rough Finish - Insulated & Waterproof
[1 dozen]
1 × $70.49 
B-61466 1" x 21" SDS‑MAX Bit, 6‑Cutter
1 × $49.20 
DeWalt DWMT74448OSP 7 Piece SAE Deep Impact Socket Set
1 × $32.99 
Diablo DS0906CWS 9in Carbide Recip Blade for Nail Embedded Wood - 3 PACK
1 × $23.99 
Simpson Strong-Tie APVDJT2R-4 Deck Joist Tie
1 × $6.79 
DeWalt DWMT74453OSP 7 Piece Metric Impact Sockets Set
1 × $24.99 
429HH Marshalltown Broom Concrete
1 × $259.14 ![West Chester 1007 PVC
Dipped Glove with Interlock Liner and Smooth Finish - Knit Wrist [1 dozen]](https://heyden.dreamhosters.com/wp-content/uploads/2023/02/1007-600x600.jpg)
West Chester 1007 PVC
Dipped Glove with Interlock Liner and Smooth Finish - Knit Wrist [1 dozen]
3 × $20.49 
BFB48 Marshalltown Broom Float
2 × $120.02 
Simpson Strong-Tie PRO250G2DC2K Quik Drive Cordless PRO250G2 Subfloor System
1 × $676.99 ![West Chester 100Y
Superior Grade Cowhide Leather Palm Glove with Fabric Back [1 dozen]](https://heyden.dreamhosters.com/wp-content/uploads/2023/02/100Y-UP-600x600.jpg)
West Chester 100Y
Superior Grade Cowhide Leather Palm Glove with Fabric Back [1 dozen]
1 × $24.39 
Diablo DS1212BWS 12 in. 6/12 TPI Demo Demon Nail-Embedded Wood Cutting Reciprocating Saw Blade
2 × $18.44 ![West Chester 1027OR PVC
Dipped Glove with Insulated Foam Liner and Smooth Finish - 12" Length [1
dozen]](https://heyden.dreamhosters.com/wp-content/uploads/2023/02/1027OR-600x600.jpg)
West Chester 1027OR PVC
Dipped Glove with Insulated Foam Liner and Smooth Finish - 12" Length [1
dozen]
1 × $69.19 
Diablo DS0620CF 6" Carbide Reciprocating Blades for Thin Metal Cutting
1 × $9.64 
Simpson Strong-Tie PSCL 7/16 PSCL 7/16
in. 20-Gauge Galvanized Panel Sheathing Clip
1 × $27.75 
RED700514 Marshalltown Broom KITCEMFINALU30in .008W
1 × $96.72 
KB459 Marshalltown Stainless Steel Knee Boards - 1 Pair [No Pads Included]
1 × $178.80 
Diablo DS0608CF 6" Carbide Reciprocating Blades for Thick Metal Cutting
1 × $9.64 
Diablo DS0914BF5 9" Bi Metal Reciprocating Blade for Medium Metal Cutting 5 Pack
1 × $16.99 
Diablo DS0612BW5 6- 6/12" TPI Demo Demon Nail-Embedded Wood Cutting Reciprocating Saw Blade
1 × $10.69 
Diablo DS0905FG5 9" Fleam Ground Reciprocating Blade for Pruning
1 × $11.30 
428HH Marshalltown Broom Concrete
1 × $157.24 
Voltec 100ft Contractor Grade Rubber & Vinyl Hose
1 × $0.00 
Diablo DS0614BGP5 6" Reciprocating Blade for Wood, Metal, Plastic - 5 PACK
1 × $10.69 
Dewalt DCK265D2 20V Max Xr Brushless Drywall Screwgun and Cut-Out Tool Combo Kit [2.0Ah]
1 × $483.99 ![West Chester 1087 PVC
Dipped Glove with Interlock Liner and Smooth Finish - 18" Length [1
dozen]](https://heyden.dreamhosters.com/wp-content/uploads/2023/02/1087-600x600.jpg)
West Chester 1087 PVC
Dipped Glove with Interlock Liner and Smooth Finish - 18" Length [1
dozen]
1 × $35.59 ![West Chester 1007RF PVC
Dipped Glove with Interlock Liner and Rough Sandy Finish - Knit Wrist [1
dozen]](https://heyden.dreamhosters.com/wp-content/uploads/2023/02/1007R-600x600.jpg)
West Chester 1007RF PVC
Dipped Glove with Interlock Liner and Rough Sandy Finish - Knit Wrist [1
dozen]
1 × $26.99 
Simpson Strong-Tie APRTA2 Rigid Tie Angle
1 × $2.39 
Diablo DS0614BF5 6in Bi Metal Recip Blade for Medium Metal Cutting
1 × $12.55 
Simpson Strong-Tie LUS28-2Z LUS ZMAX
Galvanized Face-Mount Joist Hanger for Double 2x8
1 × $4.05 
Simpson Strong-Tie CBSQ66-SDS2 CBSQ
Galvanized Standoff Column Base for 6x6 with SDS Screws
1 × $64.55 
