Showing 481–520 of 930 resultsSorted by popularity
-
![[10 Pack] Simpson Strong-Tie THDB62500HMG Titen HD 5/8 in. x 5 in. Mechanically Galvanized Heavy-Duty Screw Anchor](https://heyden.dreamhosters.com/wp-content/uploads/2022/12/A_THDB62612HMG_ProdPho_Pho_Prod_C0-600x600.jpg)
$72.15
Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- Standard fractional sizes
- Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
$155.69
Features
- THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- Installs with an impact wrench or by hand tool
- Tested in accordance with ACI355.2, AC193 and AC106
-
$244.62
Features
- THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- Installs with an impact wrench or by hand tool
- Tested in accordance with ACI355.2, AC193 and AC106
-
$266.92
Features
- THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- Installs with an impact wrench or by hand tool
- Tested in accordance with ACI355.2, AC193 and AC106
-
$1.45
Features
- Cannot be modified
- Works for a wide range of applications
- Features speed prongs used to temporarily position and secure the connector for easier and faster installation
- LUS-series hangers are tested, load rated and code compliant
-
$2.74
Features
- Forms part of a continuous load path to resist wind and seismic forces
- The H10A-2 model holds a double-ply member and is approved for installation with the Strong-Drive® SD Connector screw
- The H10AR model is designed for rough lumber sizes
-
$1.19
Features
- Cannot be modified
- Works for a wide range of applications
- Features speed prongs used to temporarily position and secure the connector for easier and faster installation
- LUS-series hangers are tested, load rated and code compliant
-
SALE 16% OFF
$161.69 Original price was: $161.69.$135.36Current price is: $135.36.
Features
- Certified welds for confidence in strength and loading
- CC7 1/8-6 uplift loads increased for earthquake or wind loading
- Bolt spacing that meets NDS code requirements
- Diamond holes to provide temporary fastening
-
$139.08
Features:
- Can be used where quick-to-install posts are needed, including fencing and mailbox applications
- Black powder-coated steel construction for reliable strength and decorative finish
- Approved for installation with the Strong-Drive SDS Connector screw
-
$24.99
Features
- Allows easy installation of 4×4 wood posts on existing concrete
- Black powder-coated steel construction for reliable strength and decorative finish
- Approved for installation with the Strong-Drive® SDS Connector screw
-
$15.99
Features
- FPBM44E allows easy repair of rotted or damaged wood posts installed in concrete or dirt
- Black powder-coated steel construction for reliable strength and decorative finish
- Approved for installation with the Strong-Drive® SD Connector screw
- Reinforces weakened wood posts without having to replace the post or the concrete
-
$40.37
Features
- Excellent for use in cold weather conditions or applications where fast cure is required.
- superior sustained load performance at elevated temperature.
- can be specified for dry and damp conditions when in-service temperatures range from -40°F (-40°C) to 180°F (82°C).
- Approved for installation with vacuum-drill bit system without further hole cleaning.
- Passed the demanding ICC-ES AC308 adverse-condition tests pertaining to reduced and elevated temperatures and long-term sustained loads.
- Easy hole-cleaning procedure — no power-brushing required.
-
$121.41
Features
- superior bond strengths permit ductile solutions in high seismic areas.
- improved sustained load performance at elevated temperature.
- can be specified for all base material conditions when in-service temperatures range from -40°F (-40°C) to 176°F (80°C).
- Recognized per ICC ES AC308
- Approved for installation with multiple vacuum-drill bit systems without further hole cleaning.
- Wire brush hole-cleaning system for conventional blow-brush-blow cleaning method for anchoring.
- With higher bond strengths, ductile solutions can often be achieved with SET-3G in high seismic areas.
- Low-odor formulation.
- no performance difference between water-saturated concrete, water-filled holes, or submerged concrete.
- For use with potable water.
-
$111.29
This item has been DISCONTINUED.
-
$296.79
3in TILT UP REBAR CHAIR (500)
-
$266.07
2in TILT UP REBAR CHAIR (500)
-
$286.56
3in DOUBLE REBAR CHAIR (500)
-
SALE 4% OFF
$225.14 Original price was: $225.14.$216.13Current price is: $216.13.
Features
- Material: Polypropylene
- Triangular design
- Accept #4 and #5 rebar
2in DOUBLE REBAR CHAIR (500)
-
-
-
-
-
-
$347.96
Features
- Polypropylene material
- Triangular design
- Accepts #4 and #5 rebar
- Standard, double, or tilt-up design
-
$118.02
TIMBER END GRAIN SKIN – 8X16in (SET OF 2)
-
-
-
-
-
-
$147.51
GILPINftS FALLS TEXTURE SKIN
-
$270.46
GILPINftS FALLS MAT (GREEN) FLEX
-
$540.89
GILPINftS FALLS MAT (GREEN)
-
$270.46
GILPINftS FALLS MAT (BLUE) FLEX
-
$540.89
GILPINftS FALLS MAT (BLUE)
-
$270.46
GILPINftS FALLS MAT (BLACK) FLEX
-
$540.89
GILPINftS FALLS MAT (BLACK)
-
$58.84
6in WOOD PLANK SINGLE FLEX
-
$235.99
Features
- 6WPFLEXX has a 15 day lead-time before shipping
- 6 in wood plank
- End Plank ‘X’ – Flex (18″ x 18″)
-
Diablo DS0614BF5 6in Bi Metal Recip Blade for Medium Metal Cutting 
