Showing 41–80 of 408 resultsSorted by popularity
-
$347.99
Features
- Simultaneous Charger: All Ports Charge At The Same Time
- Charges 12V MAX*, 20V MAX*, and FLEXVOLT® 20V/60V MAX* Batteries
- 8 Amps Output Per Port (simultaneously)
- Charges (4) DCB204 battery in 40 mins
- Side Brackets To Mount Onto The ToughSystem™ Rails
-
SALE 24% OFF
$160.99 Original price was: $160.99.$121.97Current price is: $121.97.
Features
- IP 54 Rated
- Powerful Upgraded Motor to Provide Up To 650 CFM
- Multiple hanging options – freestanding, hang hooks, and wall mount
- Wide-Range, Variable Speed Control
- Up to 4.5 Hours runtime on MAX airspeed (using a DEWALT 5.0Ah Battery)
-
-
SALE 13% OFF
$2,427.99 Original price was: $2,427.99.$2,123.99Current price is: $2,123.99.
Features
- DCE210D2 has a compact inline design for efficient one-handed jaw actuation
- Press up to 2″ Copper, Stainless-Steel, and Carbon Steel (Black Iron Pipe) press fittings
- 180° rotaing head to obtain optimal press angle
- Bright LED illumination of entire press location
- Compatible with Tool Connect software
DeWalt DCE214K 1/4″ to 7/8″ Compact NIBCO Press ACR Press Jaw Kit
-
SALE 9% OFF
$170.99 Original price was: $170.99.$155.99Current price is: $155.99.
Features
- 13 degree offset box end for knuckle clearance
- Increased range of arc swing in tight spaces
- DWMT19234 features DirectTorque Technology
- Full Lifetime Warranty
-
SALE 6% OFF
$146.99 Original price was: $146.99.$138.17Current price is: $138.17.
Features
- Promote productivity with this attachment that delivers 6X faster clamps without the hassle of a hand tool
- Limit fatigue with this PEX pincher that requires less work to finish the job
- Attach in seconds to go from driving screws to clamping pipe
- Works with select DEWALT 20V MAX* and other pro-grade 18V impact drivers
DWAPXPIR Instruction Manual
-
$388.99
Features
- Bright Led Control Screen
- lift-load capacity of up to 265 lbs. MAX
- Versatile Performance
- Built-In Pressure Sensor
- Audio Alarm
-
$24.49
Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
-
$14.99
Features
- DFM12726 is available in several head styles
- Several colors and finishes to match application
- Removable (reusable in wood)
- High-low thread design for greater stability and grip
- Does not exert expansion forces
-
$448.99
Features
- The Dewalt DCF403D1 features a brushless motor delivers up to 2,100 lb of pulling force for fastening rivets, including those made of stainless steel
- 800 RIVETS PER CHARGE** to maximize productivity on the jobsite
- DESIGNED FOR EASE OF USE with tool-free nose change and on-board nose piece storage
- COMPATIBLE WITH MUTIPLE SIZE RIVETS including 3/32″, 1/8″, 5/32″, and 3/16″ rivets
- CAPABLE OF PULLING aluminum, steel, and stainless steel blind rivets
-
$1,327.06
Features
- 19.4 Joules of impact energy for fast drilling and chipping, even in the hardest concrete.
- Anti-Rotation E-CLUTCH System shuts down the tool in bind up situations.
- Constant speed electronics allows the tool to maintain speed under load
- The SHOCKS Active Vibration Control System reduces vibration felt by the user at the handles, compared to rotary hammers without this feature.
- The heavy weight design makes it ideally suited for horizontal and downward drilling for #9 – #14 rebar dowel applications and dry coring up to 6 in.
-
$1,008.99
Features
- 6.1 Joules of impact energy for fast drilling and chipping, even in the hardest concrete.
- Anti-Rotation E-CLUTCH ® System shuts down the tool in bind up situations.
- Constant speed electronics allows the tool to maintain speed under load.
- System reduces vibration felt by the user at the handles, compared to rotary hammers without thsis feature.
- The light weight design makes it ideally suited for horizontal drilling for #3 – #6 rebar dowel applications and dry coring up to 3 in.
-
$1,516.99
Features
- Dewalt DCH775X2 offers rapid drilling and chipping in hard concrete with 19.4 J of impact energy
- Maintain speed under heavy loads with constant speed electronics
- Efficient performance and runtime with brushless motor and German-engineered apparatus
- Pro-grade versatility: Tackle horizontal and downward drilling for #9 – #14 rebar dowel applications, dry coring up to 6 in., chipping in any lower wall and floor, bushing, and ground rod driving
- Reduced vibration for comfortable grip Active Vibration Control
-
SALE 4% OFF
$164.99 Original price was: $164.99.$158.39Current price is: $158.39.
Features
- DCC020IB features three power sources for on the go [20V MAX battery, 12V DC, or 110V AC]
- Convenient onboard accessory storage
- Heavy-duty rubber feet help reduce walking when in use
- Threaded chuck for secure connection to inflation valve
- High-pressure inflation mode with automatic shutoff
DCCO20IB Instruction Manual
-
$288.61
- This item has been DISCONTINUED. – SEE DCS367P1 FOR UPDATED MODEL
-
SALE 4% OFF
$457.99 Original price was: $457.99.$439.67Current price is: $439.67.
Features
- access tight corners with the DCF620CM2’s slim nose /removable shoe
- lock-on feature enables fast installation of collated drywall screws
- Full 360° rotation allows users to choose best positioning
- Detent marks allow for easy and clear setup for varying screw lengths
- fine-depth adjustment allows for consistent screw installation at varying depths
DCF620CM2 Instruction Manual
-
$153.99
Features
- LCD display allows user to adjust temperature within 50-degree increments
- Built-in overload protection shuts the heating element down and prevents burn up
- Built-in hang ring adds a convenient storage feature
- Cord protector keeps the cord from tearing away from the housing
- Built-in innovative kickstand support provides greater stability and prevents tip over
-
$503.71
Features
- Mix up to 19 premixed drywall buckets (5 gal.) on a single charge using the DCB606 DEWALT FLEXVOLT® battery (6Ah)**
- Mix up to 17 buckets of tile mortar (5 gal.) on a single charge using THE DCB606 FLEXVOLT battery (6.0Ah)**
- Mix up to 9 buckets of concrete (4.5 gal.) on a single charge using THE DCB606 FLEXVOLT battery (6.0Ah)**
- 3-Position side handle allows for optimum position while mixing
- Integrated E-Clutch System helps to improve user control
-
$342.99
Features
- Brushless motor for efficient performance and runtime
- Wide variable speed range with dedicated High and Low settings helps optimize usage in light- and heavy-gauge substrates
- Four dedicated tool modes enable operation of tool in Trigger Mode (High Speed), Trigger Mode (Low Speed), PushStart Mode, and Lock-On Mode
- Top-mounted electronic mode select enables fast, one-handed switching between the tool’s four modes
- Adjustable nosecone enables consistent setting of proper screw depth
-
$1,033.99
Features
- Drives into concrete and steel substrates for application versatility
- Adjustable power settings for application versatility
- Automatic piston return and load advancement for fast application speed
- Tool-free disassembly for easy, onsite cleaning and serviceability
-
$338.99
Features
- 20V Max
- Light Weight
- Brushless Cordless Tool
- 3 Mode LED
-
$44.99
Features
- Designed for use with threaded rod and reinforcing bar hardware elements
- Evaluated and recognized for freeze/thaw performance
- Cartridge design allows for multiple uses using extra mixing nozzles
- Mixing nozzles proportion adhesive and provide simple delivery method into drilled holes
- Evaluated and recognized for long term and short term loading
-
$29.99
Features
- PFC1271050 is designed for use with threaded rod and reinforcing bar hardware elements
- Evaluated and recognized for freeze/thaw performance
- Cartridge design allows for multiple uses using extra mixing nozzles
- Mixing nozzles proportion adhesive and provide simple delivery method into drilled holes
- Evaluated and recognized for long term and short term loading
-
$49.99
Features
- DW5819 feature Iron blast technology
- 2x longer life
- Stands up to rebar strikes
- Wear mark indicator
-
$101.99
Features
- Extreme durability
- 2X longer life
- Stands up to rebar strikes
- Wear mark indicator
- High Impact tip
-
$41.99
Features
- Extreme durability
- longer life
- Wear mark indicator
- High Impact tip
-
$37.99
Features
- Extreme durability
- 2X longer life
- Stands up to rebar strikes
- Wear mark indicator
- High Impact tip
-
$35.99
Features
- Carbide tip geometry is optimized to cut through rebar to easily.
- Durable head design enables drilling in Hammer Mode
- SDS+ shank lets you easily switch between a carbide bit and rebar cutter
-
$30.99
Features
- Carbide tip geometry is optimized to cut through rebar to easily.
- Durable head design enables drilling in Hammer Mode
- SDS+ shank lets you easily switch between a carbide bit and rebar cutter
-
$70.99
Features
- High impact tip maximizes carbide surface contact for longer bit life.
- Open head design channels dust into flutes for quicker drilling.
- Longer helix four flute design expedites mill removal for quicker drilling.
- For use with all brands of SDS max rotary hammers.
-
$40.99
Features
- Iron blast technology
- 2X longer life
- Stands up to rebar strikes
- Wear mark indicator
- No break guarantee
-
$38.99
Features
- Extreme durability
- 2X longer life
- Stands up to rebar strikes
- Wear mark indicator
- Anchor wear mark indicator
-
$76.99
Features
- DW5824 features high impact tips to maximizes carbide surface contact for longer bit life.
- Open head design channels dust into flutes for quicker drilling.
- Longer helix four flute design expedites mill removal for quicker drilling.
- For use with all brands of SDS max rotary hammers.
-
$28.99
Features
- Rock carbide tip for longer bit life
- Elongated four flute helix for faster material removal
- Increased steel prevents breakage
- For use with electric or cordless rotary hammers
-
$10.99
Features
- 2X’s More Carbide for Longer Life
- SDS PLUS Masonry Drill Bits
- Rebar strike resistant
- No break guarantee
- Anchor wear mark indicator
-
$19.99
Features
- Rock carbide tip for longer bit life
- Elongated four flute helix for faster material removal
- Increased steel prevents breakage
- For use with electric or cordless rotary hammers
-
$23.99
Features
- Fully hardened steel body delivers increased life and durability
- Bulk packs of 10 or 15 available for the most common products
-
$30.99
Features
- Fully hardened steel body delivers increased life and durability
- Bulk packs of 10 or 15 available for the most common products
-
$21.99
Features
- DWA5322 features a dual Steel Design is high impact and shock resistant.
- High durability, wear resistant tip increase durability and reduces down time.
- High durability, shock resistant shaft prevents breakage to increase productivity.
