[50 Rolls] MAX TW898 21 Gauge Rebar Tie Wire for RB397 RB398 RB517 and RB518 rebar tiers only – 50 Roll Case
$279.64Features
- 21 Gauge Steel Tie Wire
- Bare steel with no coating
- For use with MAX RB397, RB398, RB517 and RB518
Showing 1–40 of 42 resultsSorted by popularity
-
-
Simpson Strong-Tie DIAB50 DIAB Drop-In Internally Threaded Anchor for 1/2-in. Rod
$0.43Features:
- Faster installation than previous drop-in anchor design sets with 40% fewer hammer hits
- Positive-set marking system indicates when anchor is properly set
- Zinc-plated carbon steel
- Length: 2 in.
- Drill bit diameter: 5/8 in.
Minimum order quantity: 50Order in multiples of: 50 -
![[50 Pack] Simpson Strong-Tie THD37400CS Titen HD 3/8 in. x 4 in. Zinc-Plated Countersunk Head Heavy-Duty Screw Anchor](https://heyden.dreamhosters.com/wp-content/uploads/2022/12/b3d40e526ae041ff4ca2b4995a048052d426f671-3-600x600.jpg)
[50 Pack] Simpson Strong-Tie THD37400CS Titen HD 3/8 in. x 4 in. Zinc-Plated Countersunk Head Heavy-Duty Screw Anchor
$61.84Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Standard fractional sizes, hole size same as anchor size
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Removable — ideal for temporary anchoring or applications where fixtures may need to be moved
- 6-lobe drive reduces driver-bit cam-outs, resulting in easier installation
- Countersunk head allows screw anchor applications incompatible with a hex head
- Available in 1/4″ and 3/8″ diameters
-
[50 Pack] Simpson Strong-Tie THD37500H Titen HD 3/8 in. x 5 in. Heavy-Duty Screw Anchor
$95.38Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- Standard fractional sizes
- Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
[50 Rolls] MAX TW898-PC Poly Coated 21 Gauge Rebar Tie Wire
$629.50Features
- 21 Gauge Steel Tie Wire
- Bare steel with no coating
- For use with MAX RB397, RB398, RB517 and RB518
-
PIP 302-0500M ANSI Type R Class 2 Two-Tone Eleven Pocket Mesh Surveyors Vest
$532.99Features
- Breathable polyester mesh
- 2″ two-tone tape for optimum visibility
- Zipper closure
- 2 mic tabs with reinforced stitching
- 2 lower external flap pockets
Select Options This product has multiple variants. The options may be chosen on the product page -
[Case] PIP 302-0500 ANSI Type R Class 2 Two-Tone Eleven Pocket Surveyors Vest with Solid Front and Mesh Back
$532.99Features
- Solid front and mesh back for breathability
- 2″ two-tone tape for optimum visibility
- Zipper closure
- 2 mic tabs with reinforced stitching
- 2 lower external flap pockets
Select Options This product has multiple variants. The options may be chosen on the product page -
[50 Pack] Simpson Strong-Tie STB2-37334 Strong-Bolt 2 — 3/8 in. x 3-3/4 in. Wedge Anchor
$28.49Features
- STB2-37334 has a chamfered top designed to prevent mushrooming during installation
- Qualified for static and seismic loading conditions (seismic design categories A through F)
- Suitable for horizontal, vertical and overhead applications
- Qualified for minimum concrete thickness of 3 1/4″, and lightweight concrete-over-steel deck thickness of 2 1/2″ and 3 1/4″
- Standard (ANSI) fractional sizes: fits standard fixtures and installs with common drill bit and tool sizes
-
Simpson Strong-Tie 3PB Quick-Lock Pier Boot
$235.69Features
- Quick and easy installation
- 3PB is made of durable noncorrosive plastic
- No tools required
-
Simpson Strong-Tie 3BB Quick-Zip Bar Booster
$249.89Features
- Quick and easy installation
- 3BB is made of durable noncorrosive plastic
- No tools required
-
Simpson Strong-Tie 4-2IN-UBC Quick-Lock Unibar Centralizer
$242.39Features
- Quick and easy installation
- 4-2IN-UBC is made of durable noncorrosive plastic
- Snaps over the rebar
-
[Pack of 50] DeWalt 7422SD1-PWR 1/2 in. X 3-3/4 in. Power-Stud Carbon Steel Wedge Expansion Anchor
$45.58Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
-
[Pack of 50] DeWalt 7413SD1-PWR 3/8 In. x 3 In. Power Stud Carbon Steel Wedge Expansion Anchor
$17.29Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
-
SALEÂ 6% OFF
[50 Pack] Simpson Strong-Tie THD37600H Titen HD 3/8 in. x 6 in. Heavy-Duty Screw Anchor
Original price was: $106.92.$100.50Current price is: $100.50.Features
- THD37600H is tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Standard fractional sizes
- Do not reuse anchor
-
![[50 Pack] Simpson Strong-Tie THDB25412CS Titen HD 1/4 in. x 4-1/2 in. Zinc-Plated Countersunk Head Heavy-Duty Screw Anchor](https://heyden.dreamhosters.com/wp-content/uploads/2022/12/b3d40e526ae041ff4ca2b4995a048052d426f671-2-600x600.jpg)
[50 Pack] Simpson Strong-Tie THDB25412CS Titen HD 1/4 in. x 4-1/2 in. Zinc-Plated Countersunk Head Heavy-Duty Screw Anchor
$56.28Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Standard fractional sizes, hole size same as anchor size
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Removable — ideal for temporary anchoring or applications where fixtures may need to be moved
- 6-lobe drive reduces driver-bit cam-outs, resulting in easier installation
- Countersunk head allows screw anchor applications incompatible with a hex head
- Available in 1/4″ and 3/8″ diameters
-
[50 Pack] Simpson Strong-Tie THDC25200H6SS Titen HD 1/4 in. x 2 in. Type 316 Stainless-Steel Heavy-Duty Screw Anchor
$179.09Features
- THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- Installs with an impact wrench or by hand tool
- Tested in accordance with ACI355.2, AC193 and AC106
-
![[50 Pack] Simpson Strong-Tie THD37212CS Titen HD 3/8 in. x 2-1/2 in. Zinc-Plated Countersunk Head Heavy-Duty Screw Anchor](https://heyden.dreamhosters.com/wp-content/uploads/2022/12/b3d40e526ae041ff4ca2b4995a048052d426f671-4-600x600.jpg)
[50 Pack] Simpson Strong-Tie THD37212CS Titen HD 3/8 in. x 2-1/2 in. Zinc-Plated Countersunk Head Heavy-Duty Screw Anchor
$62.17Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Standard fractional sizes, hole size same as anchor size
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Removable — ideal for temporary anchoring or applications where fixtures may need to be moved
- 6-lobe drive reduces driver-bit cam-outs, resulting in easier installation
- Countersunk head allows screw anchor applications incompatible with a hex head
- Available in 1/4″ and 3/8″ diameters
-
[50 Pack] Simpson Strong-Tie THD37600H6SS Titen HD 3/8 in. x 6 in. Type 316 Stainless Steel Heavy-Duty Screw Anchor
$374.62Features
- THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- Installs with an impact wrench or by hand tool
- Tested in accordance with ACI355.2, AC193 and AC106
-
![[50 Pack] Simpson Strong-Tie THD37134H Titen HD 3/8 in. x 1-3/4 in. Heavy-Duty Screw Anchor](https://heyden.dreamhosters.com/wp-content/uploads/2022/12/A_THD62600H_ProdPho_Pho_Prod_TitenHD-Zinc_C0-4-600x600.jpg)
[50 Pack] Simpson Strong-Tie THD37134H Titen HD 3/8 in. x 1-3/4 in. Heavy-Duty Screw Anchor
$40.62Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- Standard fractional sizes
- Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
[50 Pack] Simpson Strong-Tie THDB25312CS Titen HD 1/4 in. x 3-1/2 in. Zinc-Plated Countersunk Head Heavy-Duty Screw Anchor
$53.42Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Standard fractional sizes, hole size same as anchor size
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Removable — ideal for temporary anchoring or applications where fixtures may need to be moved
- 6-lobe drive reduces driver-bit cam-outs, resulting in easier installation
- Countersunk head allows screw anchor applications incompatible with a hex head
- Available in 1/4″ and 3/8″ diameters
-
![[50 Pack] Simpson Strong-Tie THD37212H Titen HD 3/8 in. x 2-1/2 in. Heavy-Duty Screw Anchor](https://heyden.dreamhosters.com/wp-content/uploads/2022/12/A_THD62600H_ProdPho_Pho_Prod_TitenHD-Zinc_C0-6-600x600.jpg)
[50 Pack] Simpson Strong-Tie THD37212H Titen HD 3/8 in. x 2-1/2 in. Heavy-Duty Screw Anchor
$45.77Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- Standard fractional sizes
- Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
[50 Pack] Simpson Strong-Tie THD37600HMG Titen HD 3/8 in. x 6 in. Mechanically Galvanized Heavy-Duty Screw Anchor
$188.46Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- Standard fractional sizes
- Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
[50 Pack] Simpson Strong-Tie THD50234RH Titen HD 3/8 in. x 2-3/4 in. Threaded Rod Hanger for 1/2-in. Rod
$93.08Features
- Thread design undercuts to efficiently transfer the load to the base material
- Serrated cutting teeth and thread design enable quick and easy installation
- Specialized heat-treating process creates tip hardness to facilitate cutting while the anchor body remains ductile
- Designed to install using a rotary hammer or hammer drill with standard ANSI drill bits — no special tools required
- Installs with standard-sized sockets
- Code listed for cracked and uncracked concrete applications under the 2015, 2012 and 2009 IBC/IRC, per ICC-ES ESR-2713
- FM listed
-
[50 Pack] Simpson Strong-Tie THD37400H6SS Titen HD 3/8 in. x 4 in. Type 316 Stainless Steel Heavy-Duty Screw Anchor
$316.92Features
- THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- Installs with an impact wrench or by hand tool
- Tested in accordance with ACI355.2, AC193 and AC106
-
[50 Pack] Simpson Strong-Tie THD37500H Titen HD 3/8 in. x 5 in. Type 316 Stainless Steel Heavy-Duty Screw Anchor
$346.15Features
- THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- Installs with an impact wrench or by hand tool
- Tested in accordance with ACI355.2, AC193 and AC106
-
![[50 Pack] Simpson Strong-Tie THDC25300H6SS Titen HD 1/4 in. x 3 in. Type 316 Stainless-Steel Heavy-Duty Screw Anchor](https://heyden.dreamhosters.com/wp-content/uploads/2022/12/fe7beccebff488653396b015a2d93bdb19169a58-1-600x600.jpg)
[50 Pack] Simpson Strong-Tie THDC25300H6SS Titen HD 1/4 in. x 3 in. Type 316 Stainless-Steel Heavy-Duty Screw Anchor
$190.14Features
- THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- Installs with an impact wrench or by hand tool
- Tested in accordance with ACI355.2, AC193 and AC106
-
[50 Pack] Simpson Strong-Tie THD37600H4SS Titen HD 3/8 in. x 6 in. Type 304 Stainless Steel Heavy-Duty Screw Anchor
$288.46Features
- THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- Installs with an impact wrench or by hand tool
- Tested in accordance with ACI355.2, AC193 and AC106
-
![[50 Pack] Simpson Strong-Tie THD37500HMG Titen HD 3/8 in. x 5 in. Mechanically Galvanized Heavy-Duty Screw Anchor](https://heyden.dreamhosters.com/wp-content/uploads/2022/12/THD50500H1500_300-600x600.jpg)
[50 Pack] Simpson Strong-Tie THD37500HMG Titen HD 3/8 in. x 5 in. Mechanically Galvanized Heavy-Duty Screw Anchor
$166.15Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- Standard fractional sizes
- Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
[50 Pack] Simpson Strong-Tie THD37300H4SS Titen HD 3/8 in. x 3 in. Type 304 Stainless-Steel Heavy-Duty Screw Anchor
$223.08Features
- THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- Installs with an impact wrench or by hand tool
- Tested in accordance with ACI355.2, AC193 and AC106
-
[50 Pack] Simpson Strong-Tie THD37300H Titen HD 3/8 in. x 3 in. Heavy-Duty Screw Anchor
$59.69Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- Standard fractional sizes
- Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
SALEÂ 20% OFF
[50 Pack] Simpson Strong-Tie THDC25238H6SS Titen HD 1/4 in. x 2-3/8 in. Type 316 Stainless-Steel Heavy-Duty Screw Anchor
Original price was: $183.25.$146.60Current price is: $146.60.Features
- THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- Installs with an impact wrench or by hand tool
- Tested in accordance with ACI355.2, AC193 and AC106
-
[50 Pack] Simpson Strong-Tie THD37300CS Titen HD 3/8 in. x 3 in. Zinc-Plated Countersunk Head Heavy-Duty Screw Anchor
$72.26Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Standard fractional sizes, hole size same as anchor size
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Removable — ideal for temporary anchoring or applications where fixtures may need to be moved
- 6-lobe drive reduces driver-bit cam-outs, resulting in easier installation
- Countersunk head allows screw anchor applications incompatible with a hex head
- Available in 1/4″ and 3/8″ diameters
-
[50 Pack] Simpson Strong-Tie THD37400H Titen HD 3/8 in. x 4 in. Heavy-Duty Screw Anchor
$62.38Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- Standard fractional sizes
- Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
SALEÂ 6% OFF
[50 Pack] Simpson Strong-Tie THDB37158RH Titen HD 1/4 in. x 1-5/8 in. Threaded Rod Hanger for 3/8-in. Rod
Original price was: $64.92.$61.02Current price is: $61.02.Features
- Thread design undercuts to efficiently transfer the load to the base material
- Serrated cutting teeth and thread design enable quick and easy installation
- Specialized heat-treating process creates tip hardness to facilitate cutting while the anchor body remains ductile
- Designed to install using a rotary hammer or hammer drill with standard ANSI drill bits — no special tools required
- Installs with standard-sized sockets
- Code listed for cracked and uncracked concrete applications under the 2015, 2012 and 2009 IBC/IRC, per ICC-ES ESR-2713
- FM listed
-
[50 Pack] Simpson Strong-Tie THDB25312H Titen HD 1/4 in. x 3-1/2 in. Heavy-Duty Screw Anchor
$42.54Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- Standard fractional sizes
- Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
[50 Pack] Simpson Strong-Tie THD37300H6SS Titen HD 3/8 in. x 3 in. Type 316 Stainless-Steel Heavy-Duty Screw Anchor
$288.46Features
- THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- Installs with an impact wrench or by hand tool
- Tested in accordance with ACI355.2, AC193 and AC106
-
[50 Pack] Simpson Strong-Tie THDB25400H Titen HD 1/4 in. x 4 in. Heavy-Duty Screw Anchor
$45.08Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- Standard fractional sizes
- Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
[50 Pack] Simpson Strong-Tie THD37300HMG Titen HD 3/8 in. x 3 in. Mechanically Galvanized Heavy-Duty Screw Anchor
$72.85Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- Standard fractional sizes
- Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
[50 Pack] Simpson Strong-Tie THD37400HMG Titen HD 3/8 in. x 4 in. Mechanically Galvanized Heavy-Duty Screw Anchor
$90.00Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- Standard fractional sizes
- Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
![[50 Rolls] TW898 S Max 21ga Stainless Steel Tie Wire for MAX RB398 series](https://heyden.dreamhosters.com/wp-content/uploads/2021/03/TW898-EG-1-scaled-1-600x600.jpg)
[50 Rolls] TW898 S Max 21ga Stainless Steel Tie Wire for MAX RB398 series
$879.40TW898 S Max 21ga Stainless Steel Tie Wire for MAX RB398 series
