Showing 41–80 of 336 resultsSorted by popularity
-
SALEÂ 4% OFF
$457.99 Original price was: $457.99.$439.67Current price is: $439.67.
Features
- access tight corners with the DCF620CM2’s slim nose /removable shoe
- lock-on feature enables fast installation of collated drywall screws
- Full 360° rotation allows users to choose best positioning
- Detent marks allow for easy and clear setup for varying screw lengths
- fine-depth adjustment allows for consistent screw installation at varying depths
DCF620CM2 Instruction Manual
-
$153.99
Features
- LCD display allows user to adjust temperature within 50-degree increments
- Built-in overload protection shuts the heating element down and prevents burn up
- Built-in hang ring adds a convenient storage feature
- Cord protector keeps the cord from tearing away from the housing
- Built-in innovative kickstand support provides greater stability and prevents tip over
-
$503.71
Features
- Mix up to 19 premixed drywall buckets (5 gal.) on a single charge using the DCB606 DEWALT FLEXVOLT® battery (6Ah)**
- Mix up to 17 buckets of tile mortar (5 gal.) on a single charge using THE DCB606 FLEXVOLT battery (6.0Ah)**
- Mix up to 9 buckets of concrete (4.5 gal.) on a single charge using THE DCB606 FLEXVOLT battery (6.0Ah)**
- 3-Position side handle allows for optimum position while mixing
- Integrated E-Clutch System helps to improve user control
-
$342.99
Features
- Brushless motor for efficient performance and runtime
- Wide variable speed range with dedicated High and Low settings helps optimize usage in light- and heavy-gauge substrates
- Four dedicated tool modes enable operation of tool in Trigger Mode (High Speed), Trigger Mode (Low Speed), PushStart Mode, and Lock-On Mode
- Top-mounted electronic mode select enables fast, one-handed switching between the tool’s four modes
- Adjustable nosecone enables consistent setting of proper screw depth
-
$1,033.99
Features
- Drives into concrete and steel substrates for application versatility
- Adjustable power settings for application versatility
- Automatic piston return and load advancement for fast application speed
- Tool-free disassembly for easy, onsite cleaning and serviceability
-
SALEÂ 13% OFF
$14.99 Original price was: $14.99.$12.99Current price is: $12.99.
Features
- 3041020 offers a tapered tri-flute design for faster chip ejection and less binding.
- faster, cleaner holes, less breakout, and extended drilling life.
- Full screw-point tip allows bit to self-feed for ease of drilling.
-
$44.99
Features
- Designed for use with threaded rod and reinforcing bar hardware elements
- Evaluated and recognized for freeze/thaw performance
- Cartridge design allows for multiple uses using extra mixing nozzles
- Mixing nozzles proportion adhesive and provide simple delivery method into drilled holes
- Evaluated and recognized for long term and short term loading
-
$29.99
Features
- PFC1271050 is designed for use with threaded rod and reinforcing bar hardware elements
- Evaluated and recognized for freeze/thaw performance
- Cartridge design allows for multiple uses using extra mixing nozzles
- Mixing nozzles proportion adhesive and provide simple delivery method into drilled holes
- Evaluated and recognized for long term and short term loading
-
$49.99
Features
- DW5819 feature Iron blast technology
- 2x longer life
- Stands up to rebar strikes
- Wear mark indicator
-
$101.99
Features
- Extreme durability
- 2X longer life
- Stands up to rebar strikes
- Wear mark indicator
- High Impact tip
-
$41.99
Features
- Extreme durability
- longer life
- Wear mark indicator
- High Impact tip
-
$37.99
Features
- Extreme durability
- 2X longer life
- Stands up to rebar strikes
- Wear mark indicator
- High Impact tip
-
$35.99
Features
- Carbide tip geometry is optimized to cut through rebar to easily.
- Durable head design enables drilling in Hammer Mode
- SDS+ shank lets you easily switch between a carbide bit and rebar cutter
-
$30.99
Features
- Carbide tip geometry is optimized to cut through rebar to easily.
- Durable head design enables drilling in Hammer Mode
- SDS+ shank lets you easily switch between a carbide bit and rebar cutter
-
$70.99
Features
- High impact tip maximizes carbide surface contact for longer bit life.
- Open head design channels dust into flutes for quicker drilling.
- Longer helix four flute design expedites mill removal for quicker drilling.
- For use with all brands of SDS max rotary hammers.
-
$40.99
Features
- Iron blast technology
- 2X longer life
- Stands up to rebar strikes
- Wear mark indicator
- No break guarantee
-
$38.99
Features
- Extreme durability
- 2X longer life
- Stands up to rebar strikes
- Wear mark indicator
- Anchor wear mark indicator
-
$76.99
Features
- DW5824 features high impact tips to maximizes carbide surface contact for longer bit life.
- Open head design channels dust into flutes for quicker drilling.
- Longer helix four flute design expedites mill removal for quicker drilling.
- For use with all brands of SDS max rotary hammers.
-
$28.99
Features
- Rock carbide tip for longer bit life
- Elongated four flute helix for faster material removal
- Increased steel prevents breakage
- For use with electric or cordless rotary hammers
-
$10.99
Features
- 2X’s More Carbide for Longer Life
- SDS PLUS Masonry Drill Bits
- Rebar strike resistant
- No break guarantee
- Anchor wear mark indicator
-
$19.99
Features
- Rock carbide tip for longer bit life
- Elongated four flute helix for faster material removal
- Increased steel prevents breakage
- For use with electric or cordless rotary hammers
-
$23.99
Features
- Fully hardened steel body delivers increased life and durability
- Bulk packs of 10 or 15 available for the most common products
-
$30.99
Features
- Fully hardened steel body delivers increased life and durability
- Bulk packs of 10 or 15 available for the most common products
-
$21.99
Features
- DWA5322 features a dual Steel Design is high impact and shock resistant.
- High durability, wear resistant tip increase durability and reduces down time.
- High durability, shock resistant shaft prevents breakage to increase productivity.
-
$48.99
Features
- Fully hardened steel body delivers increased life and durability
- For use with all brands of SDS max demolition hammers and rotary hammers with chipping function
- Bushing tool is used for roughing or preparing concrete surfaces for chemical treatment
- Manufactured by DEWALT
-
$67.90
Features
- DW5847 fully hardened steel body delivers increased life and durability
- Bulk packs of 10 or 15 available for the most common products
-
SALEÂ 7% OFF
$133.99 Original price was: $133.99.$123.99Current price is: $123.99.
Features
- DW55016 features depth control indicators
- Recessed grooves milled into the body of the bit every 1 in. Up to the 10 in. Mark for drilling accuracy
- Turbo and crown segments
- Laser etched
- Industry standard thread pattern
-
$3,136.99
Features
- Accuracy of +/- 1/16 in. accuracy at 100 ft.
- DW080LGSK offers 2,000 ft. range
- Tool ConnectIntegration extends laser range by 100 ft.
- Dual axis slope mode for added functionality
- Scan mode of 15/45/90 degrees
-
$2,968.99
Features
- Accuracy of 1/16 in. at 100 ft.
- DW080LGS offers 2000 ft. range
- Dual axis slope mode for added functionality
- Scan mode of 15/45/90 degrees
- IP67 rated with a 1 meter drop for jobsite durability
-
$281.99
Features
- Bolt onto the DEWALT POWERSHIFT 132 lb Class Rammer (sold separately) to add wheels and ease transport
- The DCPS600 kit includes 2 brackets and mounting hardware
- For Use With The DEWALT POWERSHIFT Class Rammer (sold separately)
- Innovative cordless equipment for Site Prep, Placement, Coring and more
-
SALEÂ 16% OFF
$970.99 Original price was: $970.99.$815.63Current price is: $815.63.
Features
- DCBPS0554 offers Powerful Performance and Runtime
- 4 LED State-Of-Charge Indicator
-
SALEÂ 4% OFF
$3,084.99 Original price was: $3,084.99.$2,961.59Current price is: $2,961.59.
Features
- Left or Right Side Positionable Controls
- Help Optimize Performance
- Convenient Onboard Storage
- State-of-Charge Indicator
- Durable Engineering
-
$5,941.71
Features
- DCPS7154AG2 features the brand new speed selector to help optimize performance.
- For user Work in comfort on tough jobs
- Activate and deactivate unit without releasing the handle mounted controls
- Get right to work with the included 3.2 gal. removable water tank, gravity feed sprinkler, and drive belt cover
- Durable Engineering
-
SALEÂ 4% OFF
$5,256.99 Original price was: $5,256.99.$5,046.71Current price is: $5,046.71.
Features
- Take on heavy duty jobs with the DCPS150AG2, featuring a 6-3/8 in. coring capacity.
- Side Handle Water Connection Point
- Wireless Tool Control
- Versatile Handle
-
$2,627.99
Features
- DCPS320AG2 features an Advanced Module – Maintain constant VPM until the battery is fully depleted
- Activated remote control for water management and wireless communication to other DEWALT products
- Connect provided strap for seamless transport with integrated carry harness connection points
- Helps withstand tough jobsite conditions with a durable roll cage
- Simply push in the desired shaft and twist the collar to remove
-
$3,427.99
Features
- Work comfortably with controls that can be mounted on either side of the harness at various heights
- Take advantage of a lightweight 25 lbs. design with the DEWALT POWERSHIFT Battery (DCBPS0554 battery sold separately)
- DCPS310AG2 is designed To Withstand Jobsite Conditions – Take on tough jobsites with a durable roll cage
- Change Connection – Simply push in the desired shaft and twist the collar to remove
- Innovative cordless equipment for Site Prep, Placement, Coring, and more
-
$2,670.99
Features
- Redesigned 1-1/8″ Hex Tool Holder For Faster Accessory Insertion and Removal
- Wireless Tool Control technology
- Brushless motor delivers 41 Joules of Impact Energy for fast chipping of concrete
- DCH966Z2K comes Tag Ready,(sold separately) to track tool location via the DEWALT Tool Connect app.
- Shock Active Vibration Control system to minimize vibration
-
$545.99
Features
- easy to use control panel allows you to turn on the water supply with the flip of a switch. No manual pumping
- The water tank has two handles so users can comfortably move the water tank around the jobsite manually
- Users can attach the DEWALT Tag (sold separately) and track its location virtually anywhere via the DEWALT Site Manager app
- DCE6820B is compatible with T-Stak and Tough System Rolling Toolbox for mobility on the jobsite
- A 10 ft (3 m), kink-resistant, braided hose ensures durability and steady water flow
-
$2,488.99
Features
- DCE600D1K2 punches up to 10 gauge mild steel and 12 gauge stainless steel
- Threadless draw stud connection allows punch and die setup without weight of the tool
- Embedded magnets in dies for precise punch setup
- Inline body and 180° rotatable head allows maximum clearance in tight spaces
- 1/2” – 1-1/4” punches thread onto draw stud for punch and die setup
Norton 12 In. x 1/8 In. x 1 In.-20 mm Gemini Concrete Cut-Off Wheel C 24 T T01/41 
MXS165BDC Marshalltown Finishing Trowel 
Dewalt DCS578X2 FLEXVOLT 60V MAX Brushless 7-1/4 in. Cordless Circular Saw with Brake Kit with 2 Batteries 
FT143BR Marshalltown Finishing Trowel Blue Steel - 14X3 - Soft Grip Handle 
Norton 7-1/4 x 5/8 In. Clipper TCT 24T Circular Saw Blade - Ripping 
