• G-Tek 34-400 Seamless Knit Nylon Glove with Nitrile Coated MicroSurface Grip on Palm & Fingers - 18 Gauge [1 dozen]

    G-Tek 34-400 Seamless Knit Nylon Glove with Nitrile Coated MicroSurface Grip on Palm & Fingers – 18 Gauge [1 dozen]

    $38.49

    Features:

    • Seamless knit nylon shell offers increased comfort, finger dexterity and breathability
    • Nitrile MicroSurface coatings are impermeable providing an elevated grip in dry and oily conditions, infused with thousands of tiny suction cup pockets that create a vacuum effect that dispenses fluids away on contact
    • Ultra-lightweight, breathable glove shell
    • Knit Wrist helps prevent dirt and debris from entering the glove
    • Color coded hems for easy size identification
    • Washable, resistant to chemicals, water, and ultraviolet light
    Select OptionsDone This product has multiple variants. The options may be chosen on the product page
  • Kut Gard 22-760GRN Seamless Knit Dyneema Blended Antimicrobial Glove - Medium Weight ANSI A7 Cut Resistance [1 each]

    Kut Gard 22-760GRN Seamless Knit Dyneema Blended Antimicrobial Glove – Medium Weight ANSI A7 Cut Resistance [1 each]

    $13.79

    Features:

    • Seamless knit construction provides comfort, fit, and dexterity
    • Dyneema? blend enhances the gloves performance without sacrificing flexibility or dexterity and ensures maximum protection
    • Ambidextrous pattern permits glove to be worn on either hand, extending wear and reducing costs
    • Special non-latex Cuff dramatically reduces cuff blowout, even after multiple launderings in bleach
    • Can be worn on its own or as a glove liner
    • Good gripping properties
    • Shrink resistant
    • Complies with FDA food handling requirements 21 CFR, Part 177
    • Antimicrobial gloves are non-toxic and non-corrosive and complies with FDA, EPA and USDA standards for food contact
    Select OptionsDone This product has multiple variants. The options may be chosen on the product page
  • ATG 18-575 Seamless Knit Engineered Yarn Glove with Nitrile Coated MicroFoam Grip on Palm, Fingers & Knuckles ANSI A2 Cut Resistance [1 dozen]

    ATG 18-575 Seamless Knit Engineered Yarn Glove with Nitrile Coated MicroFoam Grip on Palm, Fingers & Knuckles ANSI A2 Cut Resistance [1 dozen]

    $107.89

    Features:

    • MicroFoam Nitrile coatings are compatible with light oils and will provide a good grip and excellent abrasion resistance
    • Knit Wrist helps prevent dirt and debris from entering the glove
    • Innovative Fibers – Unique high performance yarns and fibers that offer cut protection while maintaining high levels of comfort
    • Reinforcement – Between the thumb and forefinger, improves cut resistance and extends glove life in an inherently weak area
    • 360? Breathability – Patented micro-foam nitrile coating offers 360? breathability making it the most breathable cut resistant glove on the market
    • Form, Fit and Feel – Mimics the “hand at rest”, reducing hand fatigue and increasing comfort
    • Latest Knitting Technology – Utilized to produce smooth and rounded fingertips, improving fingertip sensitivity
    • Consistent Liner Penetration – From the nitrile, leaving only the soft liner resting against the skin
    • Optimized Grip – Delivered through our micro-cup finish, allows for a controlled grip
    • All ingredients used in the manufacturing and construction of this product are compliant with the REACH legislation
    • This glove has been laundered prior to final packaging making it clean and safe for use
    • The Oeko-Tex? Association has evaluated and certified this product as skin safe from the second it comes into contact with the skin
    • The Skin Health Alliance has awarded professional dermatological accreditation following review of the scientific dossier behind this product
    Select OptionsDone This product has multiple variants. The options may be chosen on the product page
  • 18-570

    ATG 18-570 Seamless Knit Engineered Yarn Glove with Nitrile Coated MicroFoam Grip on Palm & Fingers ANSI A2 Cut Resistance [1 dozen]

    $107.39

    Features:

    • Nitrile MicroFoam coatings are compatible with light oils and will provide a good grip and excellent abrasion resistance
    • Knit Wrist helps prevent dirt and debris from entering the glove
    • Innovative Fibers – Unique high performance yarns and fibers that offer cut protection while maintaining high levels of comfort
    • 18-570 offers reinforcement – Between the thumb and forefinger, improves cut resistance and extends glove life in an inherently weak area
    • 360? Breathability – Patented micro-foam nitrile coating offers 360? breathability making it the most breathable cut resistant glove on the market
    • Form, Fit and Feel – Mimics the “hand at rest”, reducing hand fatigue and increasing comfort
    • Latest Knitting Technology – Utilized to produce smooth and rounded fingertips, improving fingertip sensitivity
    • Consistent Liner Penetration – From the nitrile, leaving only the soft liner resting against the skin
    • Optimized Grip – Delivered through our micro-cup finish, allows for a controlled grip
    • All ingredients used in the manufacturing and construction of this product are compliant with the REACH legislation
    • This glove has been laundered prior to final packaging making it clean and safe for use
    • The Oeko-Tex? Association has evaluated and certified this product as skin safe from the second it comes into contact with the skin
    • The Skin Health Alliance has awarded professional dermatological accreditation following review of the scientific dossier behind this product
    • Silicone Free
    Select OptionsDone This product has multiple variants. The options may be chosen on the product page
  • G-Tek 16-MP935 Seamless Knit PolyKor X7 Blended Glove with Impact Protection and NeoFoam MicroSurface Grip on Palm & Fingers ANSI A9 Cut Resistance [1 pair]

    G-Tek 16-MP935 Seamless Knit PolyKor X7 Blended Glove with Impact Protection and NeoFoam MicroSurface Grip on Palm & Fingers ANSI A9 Cut Resistance [1 pair]

    $22.69

    Features:

    • Seamless construction offers increased comfort and breathability
    • PolyKor? blended shell with X7? technology offers very high cut resistance and durability
    • NeoFoam? MicroSurface coatings are impermeable providing an elevated grip in dry and oily conditions, infused with thousands of tiny suction cup pockets that create a vacuum effect that dispenses fluids away on contact
    • Reinforced thumb crotch for extended glove life, enhanced comfort, increased abrasion resistance and added durability in a high-wear area
    • Thermo Plastic Rubber (TPR) back-of-hand impact resistance to knuckles and fingers by dispersing impact force energy away from the bone, without sacrificing dexterity
    • Touchscreen compatible to allow the user to operate a touch screen phone or device without removing gloves
    • Knit Wrist helps prevent dirt and debris from entering the glove
    • Color coded hems for easy size identification
    Select OptionsDone This product has multiple variants. The options may be chosen on the product page
  • G-Tek 16-AR413 AR Seamless Knit PolyKor/Aramid Blend Glove with Neoprene Microsurface Grip on Palm & Fingers ANSI A4 Cut Resistance [1 dozen]

    G-Tek 16-AR413 AR Seamless Knit PolyKor/Aramid Blend Glove with Neoprene Microsurface Grip on Palm & Fingers ANSI A4 Cut Resistance [1 dozen]

    $165.69

    Features:

    • Seamless knit construction provides comfort without sacrificing dexterity
    • PolyKor? blended shell with Aramid PolyKor? is lightweight and provides excellent dexterity, tactile sensitivity, and cut resistance while providing protection in heat resistant applications, where sparks and heat are present
    • Microsurface Neoprene coating provides a secure grip in dry, wet and oily conditions, infused with thousands of tiny suction cup pockets that create a vacuum effect that dispenses fluids away on contact
    • ARC Rating: ATPV 13 cal/cm2
    • Knit Wrist helps prevent dirt and debris from entering the glove
    • Color coded hems for easy size identification
    • EN 407 tested Limited Flame Spread Level 4
    • ASTM F1060-08 tested Contact Heat Resistance Level 2
    Select OptionsDone This product has multiple variants. The options may be chosen on the product page
  • G-Tek 16-665 Seamless Knit PolyKor Blended Glove with Polyurethane Coated Flat Grip on Palm & Fingers ANSI A5 Cut Resistance [1 dozen]

    G-Tek 16-665 Seamless Knit PolyKor Blended Glove with Polyurethane Coated Flat Grip on Palm & Fingers ANSI A5 Cut Resistance [1 dozen]

    $78.79

    Features:

    • Seamless construction offers increased comfort and breathability
    • PolyKor? blended shell with Aramid PolyKor? is lightweight and provides excellent dexterity, tactile sensitivity, and cut resistance while providing protection in heat resistant applications, where sparks and heat are present
    • Polyurethane coatings take on the surface properties of the glove liner providing a tactile grip in dry and slightly oily conditions, ideal for applications that require dexterity for precise handling
    • Knit Wrist helps prevent dirt and debris from entering the glove
    • Color coded hems for easy size identification
    • 100% Silicone Free
    • Washable, resistant to chemicals, water, and ultraviolet light
    Select OptionsDone This product has multiple variants. The options may be chosen on the product page
  • G-Tek 16-399 Seamless Knit PolyKor X7 Blended Glove with NeoFoam Coated MicroSurface Grip on Palm & Fingers - Touchscreen Compatible ANSI A9 Cut Resistance [1 dozen]

    G-Tek 16-399 Seamless Knit PolyKor X7 Blended Glove with NeoFoam Coated MicroSurface Grip on Palm & Fingers – Touchscreen Compatible ANSI A9 Cut Resistance [1 dozen]

    $183.49

    Features:

    • Seamless construction offers increased comfort and breathability
    • PolyKor? blended shell with X7? technology offers very high cut resistance and durability
    • NeoFoam? offers an incredibly secure grip in dry conditions, a versatile and flexible coating that provides breathability and a high degree of dexterity, ideal for handling and the assembly of parts
    • Touchscreen compatible to allow the user to operate a touch screen phone or device without removing gloves
    • Knit Wrist helps prevent dirt and debris from entering the glove
    • 100% Silicone-Free
    • Color coded hems for easy size identification
    Select OptionsDone This product has multiple variants. The options may be chosen on the product page
  • 120-MP2100

    Boss 120-MP2100 Green Corded Cotton Palm and Spandex Back – TPR Impact Protection ANSI A2 Cut Resistance [1 pair]

    $14.49

    Features:

    • Green cotton corded palm
    • 120-MP2100 features a reinforced thumb crotch
    • Back-of-hand impact resistance
    • Hook & loop closure
    • Hi-Vis
    Select OptionsDone This product has multiple variants. The options may be chosen on the product page
  • Kut Gard 08-KA740PD Seamless Knit ACP / Kevlar Blended Glove with PVC Dot Grip and Polyester Lining - Economy Weight ANSI A4 Cut Resistance [1 dozen]

    Kut Gard 08-KA740PD Seamless Knit ACP / Kevlar Blended Glove with PVC Dot Grip and Polyester Lining – Economy Weight ANSI A4 Cut Resistance [1 dozen]

    $80.49

    Features:

    • Seamless knit construction provides comfort without sacrificing dexterity
    • Prioprietary ACP Technology and Kevlar? blended shell provides excellent protection against heat, cuts, lacerations and abrasions
    • Heat resistance protects the hand from minor heat and burn injuries up to 350?F, Do not use near open flame
    • Polyester lining is ultra soft and very lightweight
    • Knit Wrist helps prevent dirt and debris from entering the glove
    • PVC dots provide enhanced grip and extra cut and abrasion resistance
    • 100% Silicone Free
    • Color coded hems for easy size identification
    • Launderable for extended life and to reduce replacement costs
    Select OptionsDone This product has multiple variants. The options may be chosen on the product page
  • Kut Gard 08-K385 Kevlar Blended Slabbers Glove with Extended Cuff and Double-Sided PVC Dot Grip ANSI A6 Cut Resistance [1 dozen]

    Kut Gard 08-K385 Kevlar Blended Slabbers Glove with Extended Cuff and Double-Sided PVC Dot Grip ANSI A6 Cut Resistance [1 dozen]

    $324.19

    Features:

    • Dupont Kevlar? fiber construction provides high tensile strength relative to its weight, is inherently cut resistant and will not melt, ignite or conduct electricity
    • Seamless construction offers increased comfort and breathability
    • Double-sided PVC dots provide enhanced grip and extra cut and abrasion resistance
    • Superior abrasion and fatigue resistance compared to traditional para-aramid
    • Extended knit wrist helps prevent dirt and debris from entering the glove and provides added arm protection
    • Resists shrinking even with repeated laundering
    Select OptionsDone This product has multiple variants. The options may be chosen on the product page
  • Kut Gard 07-TW600 Seamless Knit ACP / PolyKor Blended Glove with Polyester Lining - Heavy Weight ANSI A6 Cut Resistance [1 dozen]

    Kut Gard 07-TW600 Seamless Knit ACP / PolyKor Blended Glove with Polyester Lining – Heavy Weight ANSI A6 Cut Resistance [1 dozen]

    $90.59

    Features:

    • The proprietary PolyKor? blend provides exceptional cut resistance and overall performance
    • Seamless knit construction protects hands without sacrificing comfort or dexterity
    • Lighter and more flexible than comparable wire core gloves
    • Knit wrist provides a secure fit and helps prevent dirt and debris from entering the glove
    • Ambidextrous design allows replacing one glove at a time, rather than pairs
    • Dark color helps hides dirt and grime reducing the rate of disposal or laundering required saving money and extending the life of the glove
    • 100% Silicone-Free
    • Good washability, keeps its stretch and recovery even after laundering
    • Color coded hems for easy size identification
    Select OptionsDone This product has multiple variants. The options may be chosen on the product page
  • Kut Gard 07-KA744 Seamless Knit ACP / Kevlar Blended Glove with Cotton Lining - Economy Weight ANSI A3 Cut Resistance [1 dozen]

    Kut Gard 07-KA744 Seamless Knit ACP / Kevlar Blended Glove with Cotton Lining – Economy Weight ANSI A3 Cut Resistance [1 dozen]

    $40.99

    Features:

    • Seamless knit construction provides comfort without sacrificing dexterity
    • Prioprietary ACP Technology and Kevlar? blended shell provides excellent protection against heat, cuts, lacerations and abrasions
    • Heat resistance protects the hand from minor heat and burn injuries up to 350?F, Do not use near open flame
    • Cotton lining is ultra soft and very lightweight
    • Knit Wrist helps prevent dirt and debris from entering the glove
    • 100% Silicone Free
    • Color coded hems for easy size identification
    • Launderable for extended life and to reduce replacement costs
    Select OptionsDone This product has multiple variants. The options may be chosen on the product page
  • 07-KA740

    Kut Gard 07-KA740 Seamless Knit ACP / Kevlar Blended Glove with Polyester Lining – Economy Weight ANSI A4 Cut Resistance [1 dozen]

    $79.29

    Features:

  • 07-KA740 ACP Technology and Kevlar blended shell provides excellent protection against heat, cuts, lacerations and abrasions
  • Do not use near open flame
  • 100% Silicone Free
  • Color coded hems for easy size identification
  • Launderable for extended life and to reduce replacement costs